Export limit exceeded: 25008 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25008 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98099 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use rcu_assign_pointer() for __rcu list updates Several places in net/ipv6/mcast.c update RCU-protected lists (np->ipv6_mc_list, idev->mc_list, idev->mc_tomb) using direct pointer assignments instead of rcu_assign_pointer(): 1. In __ipv6_dev_mc_dec(), unlinking a group from idev->mc_list did: *map = ma->next; without rcu_assign_pointer() while concurrent readers traverse idev->mc_list locklessly under rcu_read_lock(). 2. In ipv6_sock_mc_drop() and __ipv6_sock_mc_close(), unlinking a group from np->ipv6_mc_list directly assigned *lnk = mc_lst->next and np->ipv6_mc_list = mc_lst->next without rcu_assign_pointer(), racing with lockless readers in inet6_mc_check(). 3. In __ipv6_sock_mc_join(), mc_lst->next was initialized to np->ipv6_mc_list via raw assignment before publishing mc_lst. 4. In mld_del_delrec() and __ipv6_dev_mc_inc(), __rcu source pointers passed into rcu_assign_pointer() lacked explicit dereference helpers. Fix these by consistently using rcu_assign_pointer() along with mc_dereference() / sock_dereference(). | ||||
| CVE-2026-98004 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/riscv: Serialize command queue publishing Serialize command queue publishing so software producer state advances only after a command is written and the hardware tail is updated. Wait for hardware consumption outside the queue lock when the command queue is full so other CPUs are not blocked behind a long poll. | ||||
| CVE-2026-98078 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: fix reversed sequence option serialization hton_seq() expects the host-order source first and the unaligned network-order destination second. The version 1 sync sender passes these arguments in reverse for both sequence blocks. This leaves 24 bytes of the kmalloc-backed message unwritten. It may disclose stale heap data and replace the live connection sequence state with values read from the buffer. Pass the connection sequence state as the source and the message payload as the destination for both blocks. | ||||
| CVE-2026-98081 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: finish active block group cleanup if call_zone_finish() fails do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing the zones. If call_zone_finish() then fails it returned early, leaving the now inactive block group on fs_info->zone_active_bgs, leaking its reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps selecting it, spinning btrfs_zoned_activate_one_bg(). Fall through to the cleanup on failure too and return the error, but keep the block group read-only as its zones are left inconsistent. | ||||
| CVE-2026-98083 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction use-after-free in raid stripe insertion If allocation of a RAID stripe extent fails, btrfs_insert_one_raid_extent() aborts and ends the transaction before returning -ENOMEM. btrfs_finish_one_ordered(), the production caller through btrfs_insert_raid_extent(), still owns the transaction handle. It handles the error by aborting the transaction and then reaches the common exit path, which ends the transaction again. The premature end can free the handle and drop its transaction reference. Transaction cleanup can then free the transaction before the caller's second abort accesses the handle and transaction, resulting in use-after-free. Keep the abort at the failure site, but let the caller's common exit path end the transaction once, after it has finished using both objects. | ||||
| CVE-2026-98084 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks When processing calls to bpf_loop() verifier marks R1 (and R4) as precise. R1 tracks loop iterations number and because of the 'callback_depth < R1' mechanics in check_helper_call() must be marked precise. However, precision propagation for R1 was broken, when bpf_loop() call was verified on a second iteration. Consider the following verification trace: - main: bpf_loop(nr_loops, callback ...) - callback: BPF_EXIT - main: bpf_loop(nr_loops, callback ...) - ... While the first visit of the call to bpf_loop() propagated R1 precision as expected, the second call to mark_chain_precision() in the check_helper_call() set R1, but it was immediately reset when backtrack_insn() processed preceding BPF_EXIT in the loop deleted in this patch. Because of that, the second visit of the call to bpf_loop() injected checkpoint with R1 not marked as precise. Which could trick the verifier into accepting unsafe programs. See the next patch for an example of such program. Commit is structured in a way to minimize conflicts when 'bpf' would be eventually merged with 'bpf-next'. | ||||
| CVE-2026-98086 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: do not touch legacy_rmidi before it exists snd_ump_parse_endpoint() sets ump->parsed on every exit, including error, before the caller attaches the legacy rawmidi device. ump_handle_ep_name_msg() then treats parsed as "legacy_rmidi is live" and calls ump_legacy_set_rawmidi_name(), which snprintf()s into ump->legacy_rmidi->name. If a UMP packet arrives in that window (IRQ path from snd_ump_receive), legacy_rmidi is still NULL (KASAN null-ptr-deref in snprintf). Guard the legacy helpers. parsed only means endpoint info was parsed, not that legacy_rmidi exists. | ||||
| CVE-2026-98088 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues() dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA topology information for the PCI device, such as single-socket boards that don't expose device-to-node affinity. Passing -1 directly into cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds array read caught by UBSAN: UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' Fall back to cpu_online_mask when no NUMA node is available, rather than assuming dev_to_node() always returns a valid node index. | ||||
| CVE-2026-98089 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix uninitialized transport header access in alb_determine_nd() alb_determine_nd() uses icmp6_hdr(skb) to inspect ICMPv6 headers. However, in xmit paths (e.g. packets sent via AF_PACKET / raw sockets or forwarded packets), skb->transport_header is not guaranteed to be initialized. While pskb_network_may_pull() ensures the packet data is linear starting from the network header, it does not set or adjust the transport header offset. Dereferencing icmp6_hdr(skb) can therefore access out-of-bounds memory. Fetch the icmp6hdr directly after ipv6hdr following pskb_network_may_pull(), and reload ipv6hdr in case pskb_may_pull() reallocated skb->head. Also remove the unused bond argument from alb_determine_nd(). | ||||
| CVE-2026-98093 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_micfil: balance mclk enable/disable hw_params() enables mclk unconditionally and hw_free() disables it unconditionally, but the PCM core does not guarantee 1:1 pairing: hw_free() can run without hw_params(), and hw_params() can be called multiple times from the SETUP state. This triggers an "already disabled" WARN() in the first case and leaks an enable reference in the second, leaving the clock ungateable. Guard both sides with the existing mclk_flag, as fsl_sai.c does with mclk_streams. | ||||
| CVE-2026-98094 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: make dirty_lock IRQ-safe fbtft_mkdirty() can be reached from the fbcon rendering path while processing printk() in hardirq context. Meanwhile, dirty_lock is also taken by fbtft_deferred_io() in workqueue context with local interrupts enabled. Lockdep reports a possible IRQ lock inversion involving dirty_lock and console_owner. A hardirq can interrupt a CPU holding dirty_lock and enter the console rendering path, which can attempt to acquire dirty_lock again. The following lockdep report was observed on an RK3566 system with CONFIG_PROVE_LOCKING enabled: WARNING: possible irq lock inversion dependency detected swapper/2/0 just changed the state of lock: (console_owner){-...}-{0:0} but this lock took another, HARDIRQ-unsafe lock in the past: (&par->dirty_lock){+.+.}-{2:2} CPU0 CPU1 ---- ---- lock(&par->dirty_lock); local_irq_disable(); lock(console_owner); lock(&par->dirty_lock); <Interrupt> lock(console_owner); *** DEADLOCK *** Use spin_lock_irqsave() for fbtft_mkdirty() and spin_lock_irq() for fbtft_deferred_io(). They only access the dirty line range, so the IRQ-off regions remain short. | ||||
| CVE-2026-98095 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: af_packet: Don't cast tpacket_hdr.tp_len to int in tpacket_parse_header(). syzbot reported BUG() in sock_sendmsg_nosec(). [0] The problem is that tpacket_parse_header() casts user-provided tpacket_hdr.tp_len, which is u32, to int. If the length is larger than INT_MAX, the following condition in tpacket_parse_header() passes, if (unlikely(tp_len > size_max)) and any negative value can be returned to the caller, up to sock_sendmsg_nosec(). The repro set tpacket_hdr.tp_len to 0xfffffdef, which is cast to -EIOCBQUEUED (-529), triggering BUG() in sock_sendmsg_nosec(). *(uint64_t*)0x200000000008 = 0xfffffdef; ... syscall(__NR_write, /*fd=*/r[0], /*buf=*/0x200000000000ul, /*count=*/1ul); Let's define the local tp_len as u32 in tpacket_parse_header(). [0]: kernel BUG at net/socket.c:803! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 5628 Comm: syz-executor176 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026 RIP: 0010:sock_sendmsg_nosec+0x145/0x180 net/socket.c:803 Code: 06 67 48 0f b9 3a eb 95 e8 e8 3a 22 f8 48 89 df 4c 89 f6 4c 89 e2 4d 89 fb 2e e8 32 a5 5c 16 e9 51 ff ff ff e8 cc 3a 22 f8 90 <0f> 0b e8 c4 3a 22 f8 48 83 c3 18 48 89 d8 48 c1 e8 03 42 80 3c 28 RSP: 0018:ffffc90003aefb48 EFLAGS: 00010293 RAX: ffffffff89a578d4 RBX: ffff8880764c67c0 RCX: ffff88807fb23e80 RDX: 0000000000000000 RSI: 00000000fffffdef RDI: 00000000fffffdef RBP: 00000000fffffdef R08: ffffc90003aef747 R09: 1ffff9200075dee8 R10: dffffc0000000000 R11: fffff5200075dee9 R12: 0000000000000001 R13: dffffc0000000000 R14: ffffc90003aefbc0 R15: ffffffff8aac4310 FS: 000055559101b400(0000) GS:ffff888124ce0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000000210 CR3: 0000000073dca000 CR4: 00000000003526f0 Call Trace: <TASK> __sock_sendmsg net/socket.c:815 [inline] sock_write_iter+0x2de/0x3e0 net/socket.c:1266 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x612/0xba0 fs/read_write.c:687 ksys_write+0x150/0x270 fs/read_write.c:739 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f173130ecb9 Code: c0 79 93 eb d5 48 8d 7c 1d 00 eb 99 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 d8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd67e44248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f173130ecb9 RDX: 0000000000000001 RSI: 0000200000000000 RDI: 0000000000000003 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd67e44388 R13: 0000000000000002 R14: 00002000000000c0 R15: 0000000000000002 </TASK> | ||||
| CVE-2026-98097 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: Dont send random pad bytes in RESET/ACTIVATE messages The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer. Replace the strcpy(data, l->if_name) with memcpy() so that the pad bytes are actually written (l->if_name[] is zero padded) rather than sending random bytes from the skb to the remote system. Replace two other strcpy() with strscpy(). | ||||
| CVE-2026-98098 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in tipc_named_node_up() on empty publication list User-space applications can bind a large number of service addresses to one or more sockets. Each binding of a local-scope service address inserts one entry (publication) into the TIPC name table. If the number of these publications exceeds TIPC_MAX_PUBL (65535), protocol service types (such as node state and link state) are no longer inserted into the name table. This causes two issues: 1. User-space applications subscribing to node or link up/down events stop receiving notifications. 2. A NULL pointer dereference can occur: BUG: kernel NULL pointer dereference, address: 00000000000000d0 ... CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full) ... RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221) ... Call Trace: <IRQ> tipc_node_write_unlock (net/tipc/node.c:428) tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189) tipc_udp_recv (net/tipc/udp_media.c:389) Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute) -----------------------------|----------------------------- | ... | list_for_each_entry(publ, pls, binding_node) { | ... | __skb_queue_tail(list, skb); | ... | } | ... | hdr = buf_msg(skb_peek_tail(list)); ... | tipc_nametbl_publish(); | If 'tipc_nametbl_publish()' (Thread 1) fails because the number of local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference. Fix these issues by allowing protocol service types (node state, link state, and topology server) to be inserted into the name table unconditionally. This ensures that users subscribing to these types always receive notifications. In addition, the maximum number of local user publications is reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size calculated in tipc_link_set_queue_limits() remains valid. | ||||
| CVE-2026-97553 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: lock the healthmon when inserting unmount event LOLLM complains that xfs_healthmon_unmount does an unlocked insert of the unmount event into the health monitor's event list. Fix that. | ||||
| CVE-2026-98148 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: validate GUD_ROTATION_0 is present in supported rotations The rotation argument to drm_plane_create_rotation_property() is set to DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as the supported_rotations argument. The driver never validates that GUD_ROTATION_0 is present, so a device that omits it from its GUD_PROPERTY_ROTATION triggers the WARN_ON(rotation & ~supported_rotations) in drm_plane_create_rotation_property() Fix this by skipping the creation of rotation property if the device doesn't have the GUD_ROTATION_0 bit | ||||
| CVE-2026-98076 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix use-after-free on field name/type of events with multiple probes The fields of a probe-based dynamic event (kprobe, uprobe, eprobe and fprobe events) are created in traceprobe_define_arg_fields() by handing the probe_arg name/type strings to trace_define_field(), which only stores the pointers without copying. Those strings are owned by the trace_probe and are freed when that probe is removed. An event can have several probes attached. The field list is defined only once, by the first probe that registers the event, but it is kept alive by any surviving sibling probe. Deleting just that first probe by symbol - # primary A: fields are defined from A's args echo 'p:kprobes/ev vfs_read a1=$arg1' > kprobe_events # append B: shares A's event call echo 'p:kprobes/ev vfs_write a1=$arg1' >> kprobe_events # delete only A (matched by symbol), B survives echo '-:kprobes/ev vfs_read' >> kprobe_events frees A's args (trace_probe_cleanup() -> traceprobe_free_probe_arg()), but trace_probe_unlink() keeps the trace_probe_event because the probe list is not empty. The event call stays registered via B while its fields now reference freed memory. Any field lookup then reads it, e.g. echo 'a1 == 1' > events/kprobes/ev/filter BUG: KASAN: slab-use-after-free in strcmp+0xa7/0xb0 Call Trace: strcmp trace_find_event_field parse_pred process_preds create_filter apply_event_filter event_filter_write field->name references parg->name (kstrdup'd, freed with the probe) and, for array arguments, field->type references parg->fmt (kmalloc'd, freed with the probe) - the scalar type otherwise points at the static fmttype rodata, which is safe. Have traceprobe_define_arg_fields() duplicate the name and type strings and anchor the copies on the trace_probe_event, which embeds the event call and outlives every individual probe; trace_probe_event_free() releases them. The reproducer above triggers reliably; the field lookup and the delete both run under event_mutex, so this is a dangling reference after removal rather than a race. The issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab. | ||||
| CVE-2026-98079 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zstd: fix lost wakeup when waiting for a workspace A writer can sleep forever in zstd_get_workspace() even though a workspace is free. When zstd_alloc_workspace() fails, the task is queued on zwsm->wait and schedules unconditionally, never re-testing the pool. zstd_put_workspace() publishes the workspace and then calls cond_wake_up(), which only wakes when a sleeper is already visible, so a workspace returned between the failed allocation and prepare_to_wait() wakes nobody. The window is wide: zstd_alloc_workspace() goes through kvmalloc() and may enter reclaim. Only a max level workspace triggers the wakeup and one is deliberately kept allocated as the fallback every waiter waits for, so once its wakeup is lost the writer stays in TASK_UNINTERRUPTIBLE until some other task happens to return one. Re-check the pool after prepare_to_wait() has published the waiter, and use the workspace if one turned up. | ||||
| CVE-2026-98080 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not force reloc root creation during qgroup_account_snapshot() [BUG] When running btrfs/252 with quota enabled through MKFS_OPTIONS="-O quota", it has a high chance to trigger the following kernel warning and flips the fs RO: BTRFS info (device dm-2): relocating block group 30408704 flags metadata|dup ------------[ cut here ]------------ WARNING: fs/btrfs/extent-tree.c:879 at lookup_inline_extent_backref+0x74b/0x960 [btrfs], CPU#4: btrfs/2173 CPU: 4 UID: 0 PID: 2173 Comm: btrfs Not tainted 7.2.0-rc6-custom+ #457 PREEMPT(full) 3adc6528fb66f7a55fe1095385818e742f200aab Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:lookup_inline_extent_backref+0x74b/0x960 [btrfs] Call Trace: <TASK> insert_inline_extent_backref+0x7c/0x160 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __btrfs_inc_extent_ref+0xa9/0x270 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __btrfs_run_delayed_refs+0x4af/0x11c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_run_delayed_refs+0x9d/0xf0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] create_pending_snapshot+0x39d/0xf00 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] create_pending_snapshots+0x9b/0xc0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_commit_transaction+0x280/0xeb0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] prepare_to_relocate+0x147/0x200 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] relocate_block_group+0x6b/0x5e0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_relocate_block_group+0x92c/0x2380 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_relocate_chunk+0x3f/0x1a0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_balance+0xa2c/0x19c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_ioctl+0x2839/0x2d30 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __x64_sys_ioctl+0x416/0x9a0 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS info (device dm-2): leaf 4593991680 gen 233 total ptrs 175 free space 5953 owner 2 BTRFS info (device dm-2): refs 3 lock_owner 2173 current 2173 item 0 key (166772736 METADATA_ITEM 1) itemoff 16250 itemsize 33 extent refs 1 gen 222 flags 2 ref#0: tree block backref root 266 [ Skip the tree dump ] item 174 key (263225344 METADATA_ITEM 0) itemoff 10328 itemsize 33 extent refs 1 gen 162 flags 258 ref#0: tree block backref root 267 BTRFS error (device dm-2): extent item not found for insert, bytenr 179847168 num_bytes 16384 parent 4594335744 root_objectid 273 owner 0 offset 0 BTRFS error (device dm-2): failed to run delayed ref for logical 179847168 num_bytes 16384 type 182 action 1 ref_mod 1: -117 [CAUSE] The above error is showing that there is a tree reference to a metadata extent that is no longer there. With "ref_verify" mount option (requires CONFIG_BTRFS_DEBUG), there is some extra debug output: BTRFS error (device dm-2): dumping block entry [180961280 16384], num_refs 0, metadata 1, from disk 0 BTRFS error (device dm-2): root entry 256, num_refs 18446744073709551615 BTRFS error (device dm-2): root entry 273, num_refs 18446744073709551615 BTRFS error (device dm-2): Ref action 3, root 273, ref_root 273, parent 0, owner 0, offset 0, num_refs 1 btrfs_force_cow_block+0x129/0x7d0 [btrfs] btrfs_cow_block+0x10a/0x250 [btrfs] btrfs_search_slot+0x5eb/0xf40 [btrfs] btrfs_insert_empty_items+0x3a/0x70 [btrfs] insert_with_overflow+0x53/0x130 [btrfs] btrfs_insert_dir_item+0x125/0x290 [btrfs] btrfs_add_link+0xaa/0x410 [btrfs] btrfs_rename+0x5ea/0xcd0 [btrfs] btrfs_rename2+0x28/0x60 [btrfs] vfs_rename+0x5b2/0xe10 filename_renameat2+0x244/0x430 __x64_sys_rename+0x48/0x70 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ---truncated--- | ||||
| CVE-2026-98120 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix subreq ref leak Fix a subrequest ref leak in netfs_unbuffered_write() in the event that subreq->io_iter ends up zero length during preparation. | ||||