Export limit exceeded: 413472 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413472 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413472 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98641 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: set up the frame pointer for the exception callback A program acting as exception boundary saves all callee-saved registers, so build_prologue() takes the exception_cb path and never calls push_callee_regs(). That is the only place find_used_callee_regs() runs, and with it the only place ctx->fp_used is set, so the callback prologue does not emit the mov x25, sp that points BPF_REG_FP at the frame the callback runs on. x25 keeps whatever it held when bpf_throw() was called. If the throw came from a subprogram that uses its own BPF stack, that is the subprogram's frame pointer, and since the subprogram never returns it never restores x25 either. Stack accesses through BPF_REG_FP are rewritten to be stack pointer relative, so those still land in the callback's own frame. Materializing the register does not: a callback that passes the address of a local variable to a helper hands over an address in the dead subprogram's frame. That address is below the callback's stack pointer by then, and the helper's own call chain covers it, so the helper can write over its own return address. 0x1234 below is the value the helper was asked to store: pc : 0x1234 lr : 0x1234 Call trace: 0x1234 (P) bpf_test_run+0x188/0x3e0 bpf_prog_test_run_skb+0x47c/0x998 __sys_bpf+0xbdc/0xdd8 Kernel panic - not syncing: Oops: Fatal exception in interrupt Set ctx->fp_used on the exception callback path so that the existing code further down sets x25 from the stack pointer. The epilogue restores it from the main program's save area along with the other callee-saved registers, as it already does. x86 sets the frame pointer for the callback from the argument it is passed, and powerpc computes it from the stack pointer. | ||||
| CVE-2026-98720 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the runtime eVMCS controls (pin, primary, secondary, etc.) are being updated. If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and then runs the same L2 with TPR virtualization disabled, KVM will fail to refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or L1 by proxy) read and write L0's TPR. | ||||
| CVE-2026-18947 | 2 Red Hat, Redhat | 2 Red Hat Openshift Ai (rhoai), Openshift Ai | 2026-10-19 | 8.5 High |
| A flaw was found in Feast. An authorization bypass vulnerability exists in the /materialize and /materialize-incremental endpoints. By sending a specially crafted request that omits the feature_views field, an attacker can bypass intended permission checks. This allows an unauthenticated remote attacker, or any authenticated user, to trigger a full re-materialization of all feature views. The consequence is a Denial of Service (DoS) due to data corruption and significant resource consumption across all tenants. | ||||
| CVE-2026-18941 | 2 Red Hat, Redhat | 2 Red Hat Openshift Ai (rhoai), Openshift Ai | 2026-10-19 | 7.7 High |
| A flaw was found in Feast and feast-operator. The default configuration for both the Feast SDK and the feast-operator is "no_auth," meaning no security manager is installed. This default allows unauthenticated and unauthorized access to feature-server, registry-server, and offline-server endpoints. A remote attacker, by exploiting this missing authentication, could achieve remote code execution (RCE) by storing a malicious User-Defined Function (UDF) on the feature-server, trigger a denial of service (DoS) by forcing re-materialization of all tenant features, and gain unauthorized access to cross-tenant data. | ||||
| CVE-2026-18621 | 2 Red Hat, Redhat | 3 Red Hat Openshift Ai (rhoai), Ai Inference Server, Openshift Ai | 2026-10-19 | 7.6 High |
| A flaw was found in Data Science Pipelines (DSP). An attacker with namespace editor privileges can bypass security hardening by submitting a malicious Argo Workflow through the V1 API path. This allows the API server to create pods with elevated privileges, acting as a 'confused deputy' on behalf of the attacker. Successful exploitation grants the attacker node-root access, enabling arbitrary code execution and full control over the underlying node. | ||||
| CVE-2026-13717 | 2 Red Hat, Redhat | 2 Red Hat Openshift Ai (rhoai), Openshift Ai | 2026-10-19 | 8.8 High |
| A flaw was found in the Red Hat OpenShift AI (RHOAI) MaaS Gateway. Improper configuration of the Gateway in a model-serving context allows a standard user with low privileges to intercept, read, log, and alter all MaaS model traffic. This includes sensitive information such as access keys, input prompts, and outputs, leading to significant information disclosure and data tampering. | ||||
| CVE-2026-92975 | 2 Trainingbusinesspros, Wordpress-extensions | 2 Groundhogg — Crm, Newsletters, And Marketing Automation, Groundhogg | 2026-10-19 | 8.1 High |
| The Groundhogg — CRM, Newsletters, and Marketing Automation plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.8.3 via the `create_support_user()` function. This is due to the function identifying the support account solely by matching against publicly hardcoded constants — `user_login` `'groundhogg'` and email addresses `'support@groundhogg.io'` / `'help@groundhogg.io'` — where the `in_array()` email-equality check at line 238 is not a security boundary because any user fully controls their own email value. This makes it possible for an attacker with an account whose `user_login` is `'groundhogg'` and whose `user_email` matches one of the hardcoded support constants to have that account silently promoted to administrator — and additionally to super admin on multisite when the triggering administrator holds `manage_network_options` — resulting in full site takeover. Exploitation requires a two-actor flow: the attacker must first obtain or pre-plant an account with the hardcoded credentials (possible when open user registration is enabled or another account-creation path exists), after which a legitimate administrator must invoke the support-access feature via the `submit_ticket` or `process_send_support_access` entry points to trigger the promotion. | ||||
| CVE-2026-98724 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: reject too-short SGL segments The host controls an SGL segment's length. A nonzero length smaller than one SGL descriptor makes nr_descs zero, so nvmet_pci_epf_get_sgl_segment() reads the type byte of sgls[-1] outside the allocated buffer. If that byte contains a segment descriptor type, the function also copies the preceding 16 bytes and returns a negative descriptor count. The read was reproduced in 3/3 KASAN boots with only the host transfer mocked by a KUnit test: BUG: KASAN: slab-out-of-bounds in nvmet_pci_epf_get_sgl_segment Read of size 1 by task kunit_try_catch Call Trace: nvmet_pci_epf_get_sgl_segment nvmet_pci_epf_short_sgl_test Kernel panic - not syncing: KASAN: panic_on_warn set ... Reject segments that cannot hold one descriptor before allocating or transferring their contents. | ||||
| CVE-2026-100161 | 2 Villatheme, Wordpress-extensions | 2 Photo Reviews For Woocommerce, Photo Reviews For Woocommerce | 2026-10-19 | 7.2 High |
| The Photo Reviews for WooCommerce plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via the 'wcpr_image_upload_id' parameter in all versions up to, and including, 1.2.30 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The publicly-emitted `wcpr_image_upload` nonce printed on every product review form is the only gate, and no capability, authentication, or attachment ownership check is performed, allowing the payload to be stored in comment meta — which is not subject to `wp_kses` — by any unauthenticated visitor; the XSS fires once the review is visible on the frontend. | ||||
| CVE-2024-2182 | 1 Redhat | 3 Enterprise Linux, Openshift, Openstack | 2026-10-19 | 6.5 Medium |
| A flaw was found in the Open Virtual Network (OVN). In OVN clusters where BFD is used between hypervisors for high availability, an attacker can inject specially crafted BFD packets from inside unprivileged workloads, including virtual machines or containers, that can trigger a denial of service. | ||||
| CVE-2026-98712 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Take a refcount on IRQs referenced by last_lr_irq Referencing the last interrupt inserted in an LR is rather fragile, as this interrupt can vanish if a concurrently unmapped LPI. Solve this by bumping up the refcount on the interrupt when populating last_lr_irq, and drop it at vgic_prune_ap_list() time, when LPIs are being reclaimed. | ||||
| CVE-2026-98676 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: fix NULL pointer dereference in clkout registration ade9000_setup_clkout() passes NULL as the register address when registering a divider clock. During clock registration, the common clock framework calls clk_divider_recalc_rate(), which dereferences the address through readl(). As a result, probing an ADE9000 configured as a clock provider with an external input clock crashes. CLKOUT passes CLKIN through without changing its rate. Register it as a 1:1 fixed-factor clock, which does not require register access. This change does not affect the configuration using the internal clock, for which the driver does not register a clock provider. | ||||
| CVE-2026-98675 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: handle Phase C dip events in IRQ1 handler ADE9000_ST1_CROSSING_DEPTH is the exclusive upper bound for scanning the STATUS1 event bits, so a value of 25 left out the highest event bit, ADE9000_ST1_DIPC_BIT (bit 25). Phase C dip events were never reported. Bump the value to 26 so bit 25 is scanned. | ||||
| CVE-2026-98653 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix _gaccess_shadow_fault() In some circumstances, it is possible that the page of nested guest memory that is being shadowed is not present at all in the parent guest gmap. dat_entry_walk() will not find any leaf entry and return with -ENOENT, which will erroneously be propagated all the way to userspace. Fix by manually calling gmap_link() on the memory of the nested guest that is being shadowed if the mapping was not already present. | ||||
| CVE-2026-98651 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key() Some callers pass NULL as oldkey. Calling page_cond_set_storage_key() will cause that NULL pointer to get dereferenced. Fix by checking for NULL and assigning the pointer to a dummy local variable to avoid crashes. | ||||
| CVE-2026-98650 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix potential races in dat skey functions When dat_cond_set_storage_key() finds a large page, it will conditionally set the storage key in absolute memory using large_crste_to_phys() to get the absolute address. There is a race window between dat_entry_walk() and large_crste_to_phys(): the large page could have been split concurrently, and large_crste_to_phys() might be called with a crste that does not designate a large page, leading to crashes. Similar issues were also present in dat_set_storage_key(). dat_get_storage_key() and dat_reset_reference_bit() did instead check for a potential concurrent splitting of the large page, but then handled it incorrectly. Fix by performing a READ_ONCE on the crste pointer, checking and using the result, instead of dereferencing the pointer again. In case a race is detacted, try dat_entry_walk() again. | ||||
| CVE-2026-98639 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 5.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: riscv: Fix NACL hfence entry update order The SBI v3.0 specification (section 15.1.2) requires a nested HFENCE entry to be populated as follows: 1) find an unused entry with Config.Pending == 0 2) update the Page_Number and Page_Count words 3) update the Config word with Config.Pending set __kvm_riscv_nacl_hfence() writes the Config word first, so the SBI implementation (or NACL hardware) can observe a pending entry with pnum/pcount values left over from the previous use of that entry, resulting in incorrect TLB flush ranges. Write pnum and pcount first and the Config word last. Since the consumer is an external agent on coherent shared memory, use WRITE_ONCE() to stop the compiler from reordering the stores and smp_wmb() to make the parameter words globally visible before the Pending bit is set. | ||||
| CVE-2026-98634 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd_zbc: Reject disks with too many zones sd_zbc_read_zones() computes the number of zones with 64-bit arithmetic and stores the result in the unsigned int nr_zones field of struct zoned_disk_info, silently truncating counts that exceed 32 bits. The truncated count is later used to size per-zone resources, while the device may still report more zones than fit. Moreover, sd_zbc_report_zones() counts the reported zones with a signed int zone_idx, which overflows past INT_MAX. Reject devices reporting more than INT_MAX zones at scan time; such a device is not realistic for any medium that exists today, and accepting it produces inconsistent zone bookkeeping. | ||||
| CVE-2026-98633 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix skb leak in nxp_process_fw_dump() When CONFIG_DEV_COREDUMP=n, hci_devcd_append() returns -EOPNOTSUPP without freeing its skb argument. This leaks the cloned skb and also prevents nxp_set_ind_reset() from being called to perform recovery. Fix by guarding the hci_devcd_append(hdev, skb_clone(skb, GFP_ATOMIC)) call with IS_ENABLED(CONFIG_DEV_COREDUMP). | ||||
| CVE-2026-98630 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Fix payload page pool error cleanup The payload page pool pointer contains an error pointer when its allocation fails. The cleanup path passes that error pointer to page_pool_destroy() instead of destroying the header page pool. This can dereference the error pointer and leave the header page pool allocated. Destroy the header page pool instead. | ||||