Export limit exceeded: 10638 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26649 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26649 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90205 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate orphan slot during inode read Patch series "ocfs2: validate active orphan slots during inode read". OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes. A corrupted slot can therefore index osb_orphan_wipes or the slot-local system-inode cache outside their allocations before the corruption is reported. Patch 1 validates the ordinary orphan slot used by inode wipe processing. Patch 2 validates the append-DIO orphan slot used by DIO completion and orphan recovery. Both checks reject corrupt metadata at the existing inode validation boundary. This patch (of 2): [BUG] A corrupted dinode with OCFS2_ORPHANED_FL can carry an i_orphaned_slot outside the mounted filesystem slot range. ocfs2_wipe_inode() uses it to index osb_orphan_wipes before looking up the orphan directory, causing an out-of-bounds memory access. BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline] ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295 evict+0x38e/0x8f0 fs/inode.c:810 iput_final fs/inode.c:1914 [inline] iput fs/inode.c:1966 [inline] iput+0x55b/0x8b0 fs/inode.c:1926 ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374 ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373 ... [CAUSE] ocfs2_validate_inode_block() validates i_suballoc_slot but leaves the active ordinary orphan slot unchecked. Downstream consumers assume that the value is smaller than osb->max_slots. [FIX] Reject an active i_orphaned_slot outside the slot range during dinode validation, before the inode reaches orphan wipe processing. | ||||
| CVE-2026-69186 | 1 C-ares | 1 C-ares | 2026-09-20 | 5.3 Medium |
| c-ares is an asynchronous resolver library. Prior to 1.34.7, ares_dns_parse() trusts the attacker-controlled ANCOUNT, NSCOUNT, and ARCOUNT fields before confirming that the DNS response contains enough bytes for the claimed records. Because process_answer() invokes parsing before transaction ID and question validation, a malicious DNS response can cause ares_dns_record_rr_prealloc() and ares_array_set_size() to reserve disproportionate heap memory for a tiny message. Repeated responses create large allocation and release cycles that can degrade or deny name resolution, without causing memory corruption or information disclosure. This issue is fixed in version 1.34.7. | ||||
| CVE-2026-93165 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Fix memory overread in ring handler `max_response` and `sensor_num` are read from different EC commands: - `max_response` is from cros_ec_get_proto_info(). ec_dev->max_response = info->max_response_packet_size - sizeof(struct ec_host_response); - `sensor_num` is from cros_ec_get_sensor_count(). sensor_num = cros_ec_get_sensor_count(ec); With a malfunctioning EC firmware, it is possible that the `msg->insize` (i.e., `fifo_info_length` in the context) could be clamped in cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`. int fifo_info_length = sizeof(struct ec_response_motion_sense_fifo_info) + sizeof(u16) * sensorhub->sensor_num; This means the number of read bytes could be less than expected. As a result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler() overreads the `resp->fifo_info` buffer. Check the return value of cros_ec_cmd_xfer_status() and abort if the number of bytes read does not match the expected length. | ||||
| CVE-2026-90223 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound SNL TLV parsing to the skb and add length checks nfc_llcp_recv_snl() walked the SNL TLV list using a u16 offset/length pair derived from skb->len, without bounding reads to the actual skb data. Three problems followed: - For a short frame (skb->len < LLCP_HEADER_SIZE), tlv_len underflowed. - The per-TLV header (type, length) was read without checking that two bytes remained. - A declared TLV length could run past the end of the buffer, and an SDREQ with length == 0 made "service_name_len = length - 1" underflow (size_t), driving an out-of-bounds read in the following strncmp() / nfc_llcp_sock_from_sn(). The SDRES case likewise read tlv[2]/tlv[3] without a length check. A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP. Walk the TLV list by pointer, bounded by skb_tail_pointer() over the linear skb data, and validate each TLV declared length before use. Add explicit length checks for SDREQ (>= 1) and SDRES (exactly 2). Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-90133 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib() ntfs_ir_to_ib copies all entries from index_root into a freshly allocated index_block_size-byte buffer without verifying that the entries fit in the available space. The entries in index_root may be larger than the usable entry space in the index block. This can cause OOB writes past the end of the allocation. The validator ntfs_index_root_inconsistent() checks that entries are self-consistent within the IR value, but never cross-checks them against index_block_size. There is no bounds check in ntfs_ir_to_ib() before the memcpy. Fixing this at the sink in ntfs_ir_to_ib() since ntfs_index_root_inconsistent() validates the logical consistency of index_root as a structure and a root with large entries is a structurally valid root. The bug is a size conflict of ntfs_ir_to_ib(). Also, the validator is called once per inode load in ntfs_read_locked_inode() while ntfs_ir_to_ib() is only called during a reparent, a check there adds no overhead to the common path. Moreover, even a future call path that bypasses the validator would still be protected. With NULL as first parameter of ntfs_error(), the volume error flag is never set by this call, so the device name will be absent from the error message. In any case, that the caller, ntfs_ir_reparent(), prints an error message that includes the device name on NULL returns. I think this is the best solution available without adding 'struct super_block *sb' as a parameter to ntfs_ir_to_ib(). This heap out-of-bounds write is triggered by a crafted filesystem image, which is not in the kernel threat model, anyway, fixing memory errors would be nice to keep things secure. | ||||
| CVE-2026-90153 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates that the DACL fits inside the NT security descriptor, but then bounds its two ACE walks by the remaining NTSD length (acl_size) rather than the DACL's declared size (pdacl_size). When pdacl->size is smaller than the trailing NTSD buffer, bytes after the declared DACL boundary - still inside the stored security descriptor - are parsed as ACEs during access checks. A crafted DACL can place an access-granting ACE beyond pdacl->size, and the current code accepts it during SMB2_CREATE access validation, while parse_dacl() and smb_inherit_dacl() stop at pdacl_size. Bound both ACE walks by pdacl_size to match the DACL boundary semantics used elsewhere in the server. Validation: - semantic KUnit harness shows the post-boundary ACE is selected before the fix and rejected (EACCES) after it - linux master (7.2-rc6), x86_64 | ||||
| CVE-2026-61721 | 1 Fluidsynth | 1 Fluidsynth | 2026-09-20 | 8 High |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.5.0 until 2.5.6, the native DLS loader assigns file-controlled wsmp.loop_start and wsmp.loop_length values to samples without calling fluid_sample_validate() or fluid_sample_sanitize_loop(). A crafted DLS file can place sample loop points beyond the sample buffer, causing out-of-bounds reads during audio rendering, undefined behavior, possible memory disclosure, and denial of service. Builds compiled with the CMake option enable-native-dls set to OFF do not expose the affected parser. This issue is fixed in version 2.5.6. | ||||
| CVE-2026-90398 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Compile tested only. | ||||
| CVE-2026-90203 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: check block offset is not negative If a negative offset is read off disk (for example the offset into the decompressed fragment block), this will cause squashfs_copy_data() to perform an out of bounds access. Fix by checking if offset is negative, and returning 0. This matches existing behaviour where an offset beyond the block returns 0 bytes copied. To trigger this out of bounds access requires a crafted Squashfs filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be able to mount such a filesystem, but once mounted, an unprivileged user can trigger the out of bounds access by reading the crafted file with the negative offset. | ||||
| CVE-2026-91959 | 1 Freerdp | 1 Freerdp | 2026-09-20 | 6.5 Medium |
| FreeRDP before 3.31.0 contains a buffer over-read vulnerability in the rts_read_result function within the RPC gateway transport parser. Attackers can send a malicious BIND_ACK PDU with a truncated result entry to trigger an out-of-bounds read causing process abort. | ||||
| CVE-2026-90780 | 1 Sipp | 1 Sipp | 2026-09-20 | 7.5 High |
| SIPp through 3.7.7 contains a buffer overflow vulnerability in the get_header() function in src/sip_parser.cpp when processing SIP messages with header content exceeding 20,490 bytes. Unauthenticated remote attackers can send crafted SIP messages with oversized headers to overflow the static buffer and crash the process. | ||||
| CVE-2026-87824 | 1 Luben | 1 Zstd-jni | 2026-09-20 | 7.5 High |
| zstd-jni before 1.5.7-14 fails to validate the samples buffer capacity in Zstd.trainFromBufferDirect, allowing attackers to read past buffer boundaries by supplying oversized per-sample lengths. Attackers can trigger out-of-bounds memory access by providing crafted sample length arrays that cause the native implementation to walk past the buffer allocation, resulting in JVM termination. | ||||
| CVE-2026-90407 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-92525 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[] For a user QP, qp->sq.queue is a ring the application writes directly, so rxe_post_send() takes the is_user branch and only schedules send_task without validating the WQE. rxe_requester() consumes it in place via req_next_wqe() and calls copy_data(), which indexes &wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge. Only the kernel path bounds num_sge (validate_send_wr()); the user WQE is never checked, so a local unprivileged user can post a WQE with an out-of-range cur_sge or oversized num_sge and force an out-of-bounds read of the per-WQE sge array in copy_data() (vmalloc OOB read, local DoS). Bound num_sge to qp->sq.max_sge in rxe_requester() before use, the way get_srq_wqe() already guards SRQ entries, and bound cur_sge only when the WQE carries payload (dma.resid): copy_data() returns early on a zero-length copy before touching dma->sge[], so a zero-payload WQE -- the only kind a max_sge == 0 QP can post -- stays valid. Reproduced under KASAN; the vmalloc-out-of-bounds in copy_data() is gone. | ||||
| CVE-2026-93079 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Reject Get Feature count larger than the output buffer cxlctl_get_feature() sizes its output buffer from the user's fwctl_rpc.out_len, but the device is told to write cxl_mbox_get_feat_in.count bytes into rpc_out->payload, which is a separate user-controlled value. Nothing bounds count against out_len, so a small out_len with a large count overflows the kvzalloc()'d buffer. A heap OOB write reachable from FWCTL_RPC. Reject requests where count exceeds the available payload room, before allocating. | ||||
| CVE-2026-73462 | 1 Arista | 1 Eos | 2026-09-19 | 6.5 Medium |
| On affected platforms running Arista EOS with IGMP (Internet Group Management Protocol) snooping configured (enabled by default on all VLANs), a network-adjacent unauthenticated attacker can send malformed network packets on an affected VLAN to cause the IGMP snooping agent to terminate unexpectedly. This results in a temporary disruption of multicast traffic management, which may cause multicast traffic to be flooded to all ports of the affected VLAN until the service recovers. Repeated exploitation could result in a prolonged loss of intended multicast forwarding behavior. | ||||
| CVE-2026-81944 | 1 Planet Technology Corp | 2 Planet Igs-5225-8p2t4s V1, Planet Igs-5225-8p2t4s V2 | 2026-09-19 | 7.5 High |
| PLANET IGS-5225-8P2T4S industrial managed switch V1 and V2 firmware versions before 1.2412b260707 and 2.2412b260519 contain a stack-based buffer overflow in the web server. Insufficient bounds checking on data copied into a stack buffer allows a remote authenticated attacker to cause a denial of service or potentially execute arbitrary code on the underlying operating system. | ||||
| CVE-2026-84448 | 1 Struktur | 1 Libheif | 2026-09-19 | 4 Medium |
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to 1.23.2, the public heif_region_item_add_region_inline_mask_data() function in libheif/api/libheif/heif_regions.cc accepts mask_data_len without verifying that it equals the byte count required by width and height. A later heif_region_get_mask_image() call derives the read length from the region geometry, so an undersized stored buffer causes heif_region_get_inline_mask_image() to read beyond the heap allocation and copy adjacent bytes into the returned monochrome mask image. This can disclose heap data or crash an application that constructs region metadata through the writer API, while the file-parsing path is not affected because it validates the canonical mask size. This issue is fixed in version 1.23.2. | ||||
| CVE-2026-93127 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Drop scalar id on sign-extending narrowing stack fills When a spilled scalar is filled back with a sign-extending narrowing load (BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register including its scalar id, but coerce_reg_to_size_sx() then sign-extends the filled register's value. If the same slot is also filled with a plain zero-extending load (BPF_MEM), both destination registers share the id yet hold different values. A later 'if <zext-reg> == const' then refines the sign-extended register through sync_linked_regs() to a value it does not have at runtime (e.g. the verifier believes 0x80000000 while the register is 0xffffffff80000000), which can be turned into an out-of-bounds access. Drop the shared scalar id at the sign-extension site in check_mem_access() when sign extension actually changes the value, mirroring the BPF_MOVSX handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). | ||||
| CVE-2026-93148 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject MEM_ALLOC BTF accesses past object bounds BTF struct walks relax the struct-size check for accesses through a trailing flexible array. That is valid for ordinary BTF type walking, but PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static BTF type size. When walking a MEM_ALLOC object, reject the access before applying the flexible-array relaxation if the access range extends past the struct size. Apply the same policy to struct ID matching so kfunc and kptr type checks do not walk past the allocated object bounds either. | ||||