Export limit exceeded: 402678 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (402678 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90441 | 1 Watchguard | 2 Fireware, Fireware Os | 2026-10-06 | 8.1 High |
| A missing authorization vulnerability in the wgagent management daemon's session initialization function allows an authenticated, low-privileged user (including a read-only or guest administrator account) to crash the wgagent process and read arbitrary files accessible to the daemon by submitting a specially crafted management API request. | ||||
| CVE-2026-73075 | 1 Vim | 1 Vim | 2026-10-06 | 3.9 Low |
| Vim is an open source, command line text editor. From 9.2.0469 until 9.2.0843, popup_mark_opacity_zindex() in src/popupwin.c can use a negative w_winrow for a text-property-anchored popup with clipwindow and opacity, indexing before the screen array instead of accounting for w_popup_topoff and causing an out-of-bounds read and conditional write. This issue is fixed in version 9.2.0843. | ||||
| CVE-2026-98264 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: virtio: reset device before deleting virtqueues virtsnd_remove() and virtsnd_freeze() delete the virtqueues before resetting the device. del_vqs() frees the vring backing, but does not provide a generic device quiesce operation. In particular, modern virtio-pci keeps enabled queues active until the device is reset. Reset the device before deleting the virtqueues so it can no longer access the vring memory when that memory is released. This also covers probe failures after DRIVER_OK, which unwind through virtsnd_remove(). | ||||
| CVE-2026-98281 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: futex: Also allocate private hash on vfork() As Jann demonstrated, it is entirely feasible to access the mm through vfork(). Therefore we need to allocate a private hash on vfork() as well as any other CLONE_VM user. Specifically, it must be avoided to have (private) futex waiters before allocating the private hash. | ||||
| CVE-2026-98363 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: reject DVFS OPP count above MAX_DVFS_OPPS scpi_dvfs_get_info() already rejected a zero opp_count, but still trusted any larger value from the SCP firmware. The shared-memory reply only holds MAX_DVFS_OPPS entries in buf.opps[]; a bigger count over-reads that array and then sizes the allocated OPP table incorrectly (garbage OPPs / OOB). The missing upper bound dates back to the original SCPI DVFS support. Reject zero and out-of-range counts in one check and return -EINVAL. | ||||
| CVE-2026-98364 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: hold net_device reference under RCU in bundle creation xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into a local pointer without taking a device reference, then pass it to xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via dst_dev_put() and frees the old net_device, causing a use-after-free when xfrm6_fill_dst() later dereferences the stale dev pointer. BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860 (net/ipv6/xfrm6_policy.c:86 netdev_hold()) Read of size 8 at addr ffff8880142fe588 by task exploit/153 Call Trace: xfrm6_fill_dst+0x82c/0x860 xfrm_resolve_and_create_bundle+0x21d4/0x2bd0 xfrm_lookup_with_ifid+0x485/0x1640 ip6_dst_lookup_flow+0x19b/0x1e0 udpv6_sendmsg+0x1443/0x2dd0 Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU read-side critical section active until xfrm_fill_dst() has taken the required device references. | ||||
| CVE-2026-98368 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: esp: downgrade zerocopy managed frags before mutating skb frags On the out-of-place output path (esp->inplace == false) ESP rewrites the skb frag array: esp_output_head() appends a trailer frag and esp_output_tail() replaces the frags with a destination page, both referenced with get_page(). When the skb carries zerocopy managed frags (SKBFL_MANAGED_FRAG_REFS) the payload frags are owned by the ubuf and must not be referenced or unreferenced individually, but ESP mutates the frag array without ever downgrading the skb. This breaks the managed-frag invariant two ways: - esp_ssg_unref() walks the source scatterlist and drops a page reference for every frag, including the ubuf-owned payload frags, pushing their refcount below the GUP pin bias while the pages are still pinned, i.e. a use-after-free of the zerocopy pages; - esp_output_tail() installs its destination page as frag 0 with get_page() but leaves SKBFL_MANAGED_FRAG_REFS set, so skb_release_data() takes the skip_unref branch and never drops that reference, leaking the x->xfrag page at packet rate. Fix this the way every other frag-mutating site does (__ip_append_data(), __ip6_append_data(), tcp_sendmsg_locked()) and call skb_zcopy_downgrade_managed() before ESP touches the frag array: it takes a real reference on each existing frag and clears SKBFL_MANAGED_FRAG_REFS, so the per-frag unref in esp_ssg_unref() and the frag release in skb_release_data() are both balanced and no mixed-ownership frag array is left behind. | ||||
| CVE-2026-103099 | 1 Pexip | 2 Infinity, Pexip Infinity | 2026-10-06 | 7.5 High |
| Pexip Infinity before 41.1 is affected by improper input validation in the media implementation that allows a remote attacker to trigger a software abort resulting in a denial of service. | ||||
| CVE-2026-106290 | 2026-10-06 | 6.5 Medium | ||
| Uninitialized resource in GPU in Google Chrome on on Android prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-67421 | 2 Broadcom, Rabbitmq | 2 Rabbitmq Server, Rabbitmq-server | 2026-10-06 | 6.8 Medium |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ Management rendered an AMQP authorization-error reason containing an attacker-controlled queue name as HTML when the OAuth management UI was enabled. Exploitation requires an attacker with queue configure permission, a management administrator who can see but cannot read that queue, and the administrator clicking Get Message(s). A queue name containing a base element can then retarget the automatic relative refresh because the Content Security Policy omits base-uri and connect-src, and an attacker endpoint that permits the management origin through CORS can receive the victim's Authorization header. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. | ||||
| CVE-2026-105244 | 2026-10-06 | 5.3 Medium | ||
| Improper Encoding or Escaping of Output vulnerability in the RemoteSyslogAppender of Apache log4net. Every character outside visible ASCII and space was removed from the record instead of being escaped, so non-ASCII text and control characters such as tabs disappeared without notice. A party whose data reaches a log message could make a distinct value look identical in the record, for example a user name holding a zero-width space logged as admin. Only applications that use RemoteSyslogAppender are affected. This issue affects Apache log4net: from 1.2.12 before 3.5.0. Users are recommended to upgrade to version 3.5.0, which fixes the issue. | ||||
| CVE-2026-98271 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: do not leave stale header offsets after pskb_carve() pskb_carve_inside_header() and pskb_carve_inside_nonlinear() remove the first bytes of a packet and reallocate skb->head. All the headers that were present before the operation are gone, but both functions call skb_headers_offset_update(skb, 0), which is a no-op : skb->mac_header, skb->network_header, skb->transport_header and skb->csum_start keep their old values and now describe bytes which are no longer there. Both helpers size the new head from the old skb_end_offset(), so the stale offsets still land inside the new allocation. They point past skb_tail_pointer() though, to bytes that were never initialized. pskb_carve_inside_nonlinear() is the worst case, because it leaves a zombie skb with an empty linear part (skb->data == skb_tail_pointer(skb), skb_headlen(skb) == 0), while skb_mac_header_was_set() is still true and skb->mac_header is way ahead of skb->data. The only user of pskb_extract() is rds_tcp_data_recv(), and the carved skb is queued on tinc->ti_skb_list. When the RDS incoming message is released, rds_tcp_inc_free() calls skb_queue_purge(), which frees the skbs with SKB_DROP_REASON_QUEUE_PURGE. This is visible from drop_monitor, which then tries to pull back to the (bogus) mac header : skbuff: __skb_pull(len=234) skb len=6968 data_len=6968 headroom=0 headlen=0 tailroom=0 end-tail=384 mac=(234,14) mac_len=14 net=(248,40) trans=288 shinfo(txflags=0 nr_frags=1 gso(size=1428 type=16 segs=5)) csum(0x100120 start=288 offset=16 ip_summed=3 complete_sw=0 valid=1 level=0) hash(0x7b446c6c sw=0 l4=1) proto=0x86dd pkttype=0 iif=60 kernel BUG at ./include/linux/skbuff.h:2847! Add skb_carve_reset_headers() to mark the mac and transport headers as not set, reset the network header, clear skb->mac_len, and drop a now meaningless CHECKSUM_PARTIAL (csum_start no longer describes anything). Invalidate the inner offsets as well. Unlike mac_header and transport_header they have no "unset" sentinel, so a leftover non-zero value still looks like a real header. Zero skb->inner_mac_header, skb->inner_network_header, skb->inner_transport_header, skb->inner_protocol and skb->encapsulation, so that all the header state is invalidated in one place. v2: fixed an inaccurate changelog. The stale offsets stay inside the new skb->head, which is never smaller than the old one, they simply point past skb_tail_pointer() to bytes that are gone. Thanks to Xuanqiang Luo for insisting on this. Also invalidate the inner header state, as suggested by the netdev AI review : https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260911114922.621937-1-edumazet%40google.com | ||||
| CVE-2026-98272 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: prevent buffer overflow in page_pool allocation The per‑processor buffering scheme is supported only if the number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8). This is already checked in mvpp2_probe() during the initial activation of percpu_pools. However, mvpp2_change_mtu() may later call mvpp2_bm_switch_buffers(priv, true) without this check, which can lead to an out-of-bounds access in the priv->page_pool array in mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ entries, and mvpp2_get_nrxqs() may return exactly that value. The per-CPU scheme then doubles it to nrxqs * 2, exceeding the array bounds. Check that the hardware version is MVPP22 or newer and that the number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS before switching to per-CPU mode. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-106448 | 2026-10-06 | N/A | ||
| StableLib is a stable library of useful TypeScript and JavaScript code. Prior to 2.0.4, the @stablelib/cbor CBOR map decoding path creates ordinary JavaScript objects and assigns attacker-controlled keys with bracket assignment. A map key named __proto__ invokes the inherited prototype setter instead of creating an ordinary own property, allowing the decoded object's prototype to contain attacker-controlled authorization or feature-flag values. Downstream code that trusts normal property lookup or merges the decoded object can therefore make security-sensitive decisions using inherited attacker data. This issue is fixed in version 2.0.4. | ||||
| CVE-2026-106447 | 2026-10-06 | N/A | ||
| StableLib is a stable library of useful TypeScript and JavaScript code. Prior to 2.0.4, the @stablelib/cbor decoder recursively processes nested CBOR arrays, maps, and tags through _decodeValue() without enforcing a maximum nesting depth. A sufficiently deep structure exhausts the JavaScript call stack, causing a decoding exception and potentially terminating an uncaught request worker or process. This issue is fixed in version 2.0.4. | ||||
| CVE-2026-106446 | 2026-10-06 | 9.8 Critical | ||
| Handlebars provides the power necessary to let users build semantic templates. From 4.0.0 until 4.7.10, Handlebars.compile() and Handlebars.precompile() accept pre-parsed AST objects while validating only selected PathExpression, NumberLiteral, and BooleanLiteral values. This issue bypasses the AST validation introduced in version 4.7.9 for CVE-2026-33937. An attacker who can supply an object instead of a template string can place JavaScript expressions in unchecked values such as Program.blockParams.length, a non-PathExpression parameter depth, a non-string StringLiteral.value, or a non-string PathExpression.original. The compiler emits those values into generated JavaScript, causing code execution in the server process when compile output renders or wherever precompile output is loaded. Applications that pass only template strings are not affected. This issue is fixed in version 4.7.10. | ||||
| CVE-2026-73076 | 1 Vim | 1 Vim | 2026-10-06 | 7.8 High |
| Vim is an open source, command line text editor. Prior to 9.2.0847, runtime/autoload/vimball.vim allows a crafted vimball member named .VimballRecord to overwrite the installation record with attacker-chosen commands. When vimball#RmVimball() later processes the matching record entry, the stored Ex commands, including operating-system commands invoked through :!, execute with the privileges of the user running Vim. This issue is fixed in version 9.2.0847. | ||||
| CVE-2026-106445 | 2026-10-06 | N/A | ||
| Handlebars provides the power necessary to let users build semantic templates. From 4.0.0 until 4.7.10, Handlebars lookupProperty returns Function.prototype.constructor before applying the prototype-access deny list because constructor is an own property of Function.prototype. When an attacker can render a controlled template with allowProtoMethodsByDefault enabled and an accessible function in the template context, the template can traverse from that function through its prototype to Function.prototype and then obtain the Function constructor through the own-property bypass. This permits attacker-controlled JavaScript to execute with the server application's privileges. This issue is fixed in version 4.7.10. | ||||
| CVE-2026-101154 | 2026-10-06 | 7.2 High | ||
| An authenticated remote attacker with specific permissions can read or write files on the platform filesystem beyond the intended scope through specially crafted requests and/or crafted file uploads to the Network Provisioning Image Repository. | ||||
| CVE-2026-73077 | 1 Vim | 1 Vim | 2026-10-06 | 7.8 High |
| Vim is an open source, command line text editor. Prior to 9.2.0839, the runtime/ftplugin/sh.vim, runtime/ftplugin/zsh.vim, and runtime/ftplugin/ps1.vim filetype plugins pass attacker-controlled Visual-mode selections from K through keywordprg commands without safely separating shell arguments. fnameescape() and PATH_ESC_CHARS do not neutralize shell metacharacters before ShKeywordPrg, ZshKeywordPrg, or GetHelp invokes bash, zsh, or PowerShell, allowing arbitrary operating-system commands to execute with the privileges of the user running Vim. This issue is fixed in version 9.2.0839. | ||||