Export limit exceeded: 402907 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (402907 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98214 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: recheck intermediate backing files on mprotect() mprotect() can be used to bypass the SELinux checks that mmap() performs against the intermediate layers of a stacked filesystem. mmap() checks every backing layer as the request descends through the stack. mprotect() only has the lowest backing file in vma->vm_file, so it rechecks the top-level user and the lowest mounter, but skips the mounters of every layer in between. With two nested overlayfs mounts and a policy denying mounter_t -> middle_file_t:file { execute }, a direct mmap(PROT_EXEC) is denied: avc: denied { execute } for pid=71 comm="nested_exec" path="/payload" dev="overlay" ino=9 scontext=user_u:base_r:mounter_t tcontext=user_u:object_r:middle_file_t tclass=file permissive=0 while mmap(PROT_NONE) followed by mprotect(PROT_EXEC) succeeds. Preserve each intermediate path, mounter SID and file-description SID in the backing-file security blob, copying the saved entries when another backing layer is opened. Allocate the array only for nested backing files, and release it and the path references in the backing_file_free hook. During mprotect(), recheck fd { use } and the requested inode permissions for every saved mounter, and include the intermediate layers in the execmod checks. Policy for nested stacking may then need to grant intermediate mounters what a direct mmap() already requires, and execmod on intermediate labels for binaries using text relocations. Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built SELinux policy, on a mainline tree containing commit f2381b546e7e ("fs: fix user path of nested backing files"). [PM: subject tweak] | ||||
| CVE-2026-98215 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: preserve user SID across nested backing files SELinux saves the user file SID in a backing-file security blob so it remains available after mmap() replaces vma->vm_file with a backing file. For nested backing files (overlayfs over overlayfs, or FUSE passthrough backed by overlayfs), user_file may itself be a backing file. Its fsec->sid is the SID of the mounter that opened it, rather than the user that opened the top-level file. mprotect() then checks fd { use } against the mounter SID. This can incorrectly deny access without a domain transition, or check the wrong target SID after one. Copy the saved user SID when user_file is a backing file. Keep using the regular file SID for the first backing layer. With two nested overlayfs mounts and SELinux enforcing, mprotect(PROT_READ) returns EACCES with an fd { use } denial against the mounter SID. With this change, mprotect() succeeds. Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built SELinux policy. The original test was also repeated with Fedora Cloud Base 44 userspace and gave the same result. | ||||
| CVE-2026-98225 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/shrinker: fix bogus set_shrinker_bit() with cgroup.memory=nokmem With cgroup.memory=nokmem, shrinker_memcg_alloc() bails out early and never allocates an id, so shrinker->id keeps the 0 it got from the kzalloc() in shrinker_alloc(). __list_lru_init() then copies that 0 into lru->shrinker_id, where it looks like a valid bit index. Nothing calls expand_shrinker_info() on nokmem either, so shrinker_nr_max stays 0 and every memcg ends up with an empty map (map_nr_max == 0). deferred_split_folio() hands a real memcg to __list_lru_add() regardless of whether the lru is memcg aware, so the first THP queued in a cgroup does set_shrinker_bit(memcg, nid, 0) and trips the bounds check: WARNING: mm/shrinker.c:212 at set_shrinker_bit+0x7d/0x90, CPU#126 Call Trace: <TASK> deferred_split_folio+0x18c/0x220 map_anon_folio_pmd_nopf+0xdd/0x130 map_anon_folio_pmd_pf+0x14/0xb0 do_huge_pmd_anonymous_page+0x1a1/0x620 __handle_mm_fault+0xea9/0x10d0 handle_mm_fault+0xe5/0x320 do_user_addr_fault+0x1cc/0x870 exc_page_fault+0x81/0x1b0 asm_exc_page_fault+0x27/0x30 </TASK> Harmless, the WARN_ON_ONCE() is what keeps the out of bounds unit[] read from happening, but the id should not look valid in the first place. Clear it before returning. Two other spots could paper over this: drop the id in __list_lru_init() when nokmem turns memcg_aware off, or make deferred_split_folio() pass NULL like list_lru_add_obj() does. Both leave shrinker->id lying around for the next caller, so fix it where the id is handed out. | ||||
| CVE-2026-106425 | 1 Google | 1 Chrome | 2026-10-07 | N/A |
| Missing authorization in BrowserTag in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-106363 | 1 Google | 1 Chrome | 2026-10-07 | N/A |
| Missing authorization in FullScreen in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-106266 | 1 Google | 1 Chrome | 2026-10-07 | N/A |
| Confused deputy in Contextual Tasks in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to bypass web origin policy into a privileged page via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-106408 | 1 Google | 1 Chrome | 2026-10-07 | 6.5 Medium |
| Protection mechanism failure in Mobile in Google Chrome on on iOS prior to 155.0.8059.39 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-106361 | 1 Google | 1 Chrome | 2026-10-07 | N/A |
| Incorrect provision of specified functionality in Mobile in Google Chrome on on iOS prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to bypass web origin policy via crafted network traffic. (Chromium security severity: Medium) | ||||
| CVE-2026-65122 | 1 Nvidia | 1 Tensorrt | 2026-10-07 | 5.5 Medium |
| NVIDIA TensorRT contains a vulnerability where an attacker can cause an out of bounds read. A successful exploit of this vulnerability may lead to denial of service. | ||||
| CVE-2026-105267 | 1 Gitea | 1 Gitea | 2026-10-07 | N/A |
| The Gitea web route for deleting tags (`POST /{owner}/{repo}/tags/delete`) requires only write access to the Code unit, but shares its handler with release deletion and did not check that the target was a plain tag. A collaborator with Code write access and without Releases write access could permanently delete published releases of that repository, including their attachments. Protected tag rules covering the release tag still blocked the deletion. | ||||
| CVE-2026-98176 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as ffs(q->eop_ring_buffer_size / sizeof(unsigned int)) - 1 - 1 But ffs can in theory return 1 or 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to ffs(q->eop_ring_buffer_size / sizeof(unsigned int) / 4) using properties of logarithms. (cherry picked from commit 4f18c56630383c14bfc6b2d65f88f2f895d2121a) | ||||
| CVE-2026-98181 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/gud: fix out-of-bounds write in gud_plane_atomic_check() The plane property loop uses req->properties[num_properties + i] as write index while simultaneously incrementing `num_properties` inside the loop. At iteration i, num_properties has also incremented by i, so the write is done at `initial_num_properties + 2*i`, skipping every other index and advancing by 2 per iteration. With just 2 connector and 32 plane properties the last write happens at index 64, one slot past the end of the 64-slot (indices 0–63) allocation. A USB device can trigger OOB by advertising the maximum number of properties. Fix by dropping the redundant `+ i`; num_properties is already the correct running index, as gud_connector_fill_properties() fills the preceding slots. | ||||
| CVE-2026-98226 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter, and is meant to sit above any value that counter can reach. However, it is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system with 4 KiB pages the flag collides with the usage count once that count reaches 4 TiB. swap_usage_in_pages() masks bit 30 out, so whenever the real count has that bit set, every caller of it reads 4 TiB low: * /proc/swaps understates Used by 4 TiB. * A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its "if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff tears the device down while pages are still swapped out. Nothing in the rest of swapoff aborts the teardown, so those pages are lost. Independently of swapoff, the collision also corrupts the counter and the plist. On a device in normal use, a free that leaves bit 30 set in the count makes swap_usage_sub() see the flag where there is only count, and call add_to_avail_list(). It clears the bit with fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below the real one, and calls plist_add() on a device that is already listed, tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking the node a second time. Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on atomic_long_t instead. Note that the usage counter field itself is of this same type, so it is still a valid bit. | ||||
| CVE-2026-98250 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix handling of NFSEXP_PNFS in the netlink codepath The rework of how block layouts were checked moved the check for NFSEXP_PNFS out of nfsd4_setup_layout_type() and into the callers. That patch didn't account for the new call in nfsd4_setup_layout_type(). | ||||
| CVE-2026-98262 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ata: libahci: clear PxCLBU and PxFBU for AHCI_HFLAG_32BIT_ONLY A user reported that commit 105c42566a55 ("ata: ahci: force 32-bit DMA for JMicron JMB582/JMB585") made the JMicron JMB585 unusable on his board. The failure is seen as soon as the ahci driver is probed, and booting with iommu=off does not solve the problem. Looking at the AHCI specification, PxCLBU and PxFBU are both read only '0' for HBAs that do not support 64-bit addressing. For HBAs that do support 64-bit addressing, the registers are read write, with a reset value that is Implementation Specific. When using the AHCI_HFLAG_32BIT_ONLY flag, the HBA does support 64-bit addressing, and a 32-bit DMA mask is set by simply clearing HOST_CAP_64. Thus, in this case, we need to explicitly clear the registers to 0. | ||||
| CVE-2026-98275 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Ack RX overrun interrupt correctly The RX overrun interrupt is reported in interrupt status register 4, but gmac_irq() acknowledges it using the RX descriptor error bit from status register 0. For GMAC0 this writes the GMAC1 overrun bit, while for GMAC1 the shift leaves no bit in the 32-bit register. Acknowledge the same per-port RX overrun bit that was detected. | ||||
| CVE-2026-98345 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: check IP header size in cfg80211_classify8021d() A frame that looks like IP can be transmitted, but be too short, so the DS field is read incorrectly: BUG: KMSAN: uninit-value in cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027 cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027 ieee80211_select_queue+0x37a/0x9e0 net/mac80211/wme.c:180 __ieee80211_subif_start_xmit+0x60f/0x1d90 net/mac80211/tx.c:4304 ieee80211_subif_start_xmit+0xa8/0x6d0 net/mac80211/tx.c:4538 ... packet_sendmsg+0x9173/0xa2a0 net/packet/af_packet.c:3108 Use skb_header_pointer() like the MPLS case. | ||||
| CVE-2026-106213 | 1 Google | 1 Chrome | 2026-10-07 | 4.3 Medium |
| Race condition in WebAudio in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to potentially leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-98212 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: hsq: Fix use-after-free in retry work mmc_hsq_pump_requests() queues retry_work when request_atomic() returns -EBUSY; today sdhci-sprd is the only consumer that implements request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but is never cancelled during driver removal. Work still pending at unbind can therefore run after the devm allocation has been released and dereference hsq->mmc and hsq->mrq. Use devm_work_autocancel() to cancel and drain retry_work before the devm allocation is released. By the time devres cleanup begins, mmc_remove_host() has already stopped the host, so no new requests can arm the work. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98227 | 1 Linux | 1 Linux Kernel | 2026-10-07 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memstick: ms_block: destroy io_queue workqueue on removal msb_init_disk() creates the per-card ordered workqueue msb->io_queue with alloc_ordered_workqueue(). It is torn down with destroy_workqueue() only on the init error path; msb_remove() never destroys it. msb_stop() merely flushes the queue, and neither msb_data_clear() nor put_disk() free it. As a result every card insert/remove cycle leaks the workqueue and its kworker, exhausting kernel memory over repeated cycles. Destroy the workqueue in msb_remove() after the disk has been removed and the queue drained. | ||||