Export limit exceeded: 106411 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (106411 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63126 | 1 Square | 1 Wire | 2026-09-18 | 7.5 High |
| Wire provides gRPC and protocol buffers for Android, Kotlin, Swift, and Java. Prior to 6.4.5 and 7.0.0-alpha04, Wire protobuf readers do not consistently validate attacker-controlled lengths against the current logical message boundary before advancing cursors, pointers, limits, slices, or allocations. In Kotlin, ProtoAdapter.decode(ByteArray) and ProtoAdapter.decode(ByteString) use ByteArrayProtoReader32.internalNextLengthDelimited(), where a positive oversized length can wrap pos + length to a negative limit and escape the existing negative-length check. Related ProtoReader, ReadBuffer.readVarint(), ReadBuffer.verifyAdditional(count:), packed-repeated, nested-message, and ProtoDecoder.decodeSizeDelimited(_:from:) paths can cross logical boundaries, perform pointer arithmetic, reserve capacity, or convert an unrepresentable size before proving the requested bytes exist. An attacker who supplies malformed protobuf bytes can cause unchecked exceptions, traps, out-of-bounds behavior, or excessive allocation, resulting in denial of service without known confidentiality, integrity, or code-execution impact. This issue is fixed in versions 6.4.5 and 7.0.0-alpha04. | ||||
| CVE-2026-89908 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Preserve memslot arch flags on KVM_MR_FLAGS_ONLY kvm_arch_prepare_memory_region() computes new->arch.flags, i.e. whether a memslot is KVM_MEM_HUGEPAGE_CAPABLE or KVM_MEM_HUGEPAGE_INCAPABLE, only for KVM_MR_CREATE and KVM_MR_MOVE, and returns early for every other change. But the generic code allocates a zeroed memslot for every change and never copies old->arch, so after a KVM_MR_FLAGS_ONLY update, e.g. toggling KVM_MEM_LOG_DIRTY_PAGES for live migration, the active memslot has arch.flags == 0. With both flags clear, fault_supports_huge_mapping() falls through to the alignment check on the HVA range alone, which no longer verifies that the GPA and HVA have the same offset within a PMD. A memslot that was marked KVM_MEM_HUGEPAGE_INCAPABLE because of a GPA/HVA offset mismatch can then be mapped with PMD entries on read faults, and since kvm_map_page() aligns the gfn and the pfn independently, the guest ends up accessing the wrong host pages, exactly the "d -> f, e -> g" case described in the comment above the check. Carry the arch flags over from the old memslot for KVM_MR_FLAGS_ONLY, as the GPA, HVA and size are guaranteed to be unchanged for that case. | ||||
| CVE-2026-89913 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each() and dereferences the returned struct vgic_irq in the loop body without holding a reference on the LPI. The xarray iterator only provides temporary RCU coverage while looking up the current entry. That is not sufficient for this loop body, which reads fields from struct vgic_irq and performs guest memory accesses before the iteration completes. A concurrent path can trigger this race: the irqfd cached injection path (vgic_its_inject_cached_translation) obtains a transient LPI reference via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex, config_lock, or its_lock. If guest ITS DISCARD then drops the cache and ITE references under its_lock, the transient inject reference may become the final one. When vgic_put_irq() drops it, the LPI is erased from lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables() may still hold a stale pointer obtained from the xarray iterator and dereference it after the RCU grace period completes. Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes a stable reference, and dropping it with vgic_put_irq() on all paths. This matches the pattern already used by other lpi_xa iterators in the vgic ITS code. | ||||
| CVE-2026-87105 | 1 Tanium | 1 Threat Response | 2026-09-18 | 8.8 High |
| Tanium addressed a SQL injection vulnerability in Threat Response. | ||||
| CVE-2026-89875 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: ti: vpe: quiesce overflow recovery before freeing streams The VIP overflow recovery worker is armed from the hardirq handler when a FIFO overflow is detected, and the list-complete path looks the stream up through the VPDMA list private pointer. Both keep touching stream, port and device state; the recovery worker also resets the parser and VPDMA, repopulates the descriptor list, and re-enables the per-list IRQs. vip_stop_streaming() masks and clears the per-list IRQs, but it neither synchronizes the hardirq handler nor disables recovery_work. An overflow IRQ that has already queued recovery_work, or a list-complete IRQ in flight when the stream is torn down, can therefore still dereference the stream after its resources are released: the descriptor list is freed by vip_release_stream() on file release, and the stream itself by free_stream() on unbind/remove. Drain the recovery worker and the IRQ handler at both teardown points through a shared vip_quiesce_stream() helper, before any stream-owned resource is released. disable_work_sync() cancels pending recovery_work, drains a running instance, and raises its disable depth, so a subsequent schedule_work() issued by a racing IRQ handler is rejected at the workqueue scheduler: recovery_work cannot be requeued after disable_work_sync() takes effect. The worker may still re-enable the per-list IRQs before disable_work_sync() returns; disable_irqs() then masks those sources and synchronize_irq() waits for any in-flight handler that still dereferences stream state. In vip_stop_streaming() the helper runs before the parser is stopped, since a worker drained by disable_work_sync() may re-enable the parser before exiting and would otherwise undo the stop. recovery_work is created disabled and enabled in vip_start_streaming() before IRQs, pairing the enable with the teardown disable across the streaming lifecycle. This issue was found by an in-house static analysis tool and confirmed by manual code review. | ||||
| CVE-2026-89877 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the device to the global saa7164_devlist before requesting the PCI BAR memory regions. If get_resources() fails, saa7164_dev_setup() decrements the device count and returns an error, but leaves the device on saa7164_devlist. The probe error path then frees the device, leaving a dangling entry on the global list. Reuse the existing MMIO mapping error path to remove the device from saa7164_devlist and decrement the device count before returning. Also release BAR0 if it was successfully requested but the BAR2 request fails. | ||||
| CVE-2026-89880 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(), rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and shares a single err: label that only unlocks the mutex and returns. When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs() itself returns -ENOMEM after alloc_stream_bufs() has already succeeded, the URBs and/or the coherent DMA stream buffers stay allocated while streaming reports failure to vb2. Two latent defects follow on the next VIDIOC_STREAMON: 1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently leaking the coherent DMA memory allocated by the previous attempt. 2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only increments it. After a second successful pass urbs_initialized can exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks from urbs_initialized - 1 down to 0 and reads past the end of dev->urb_list[], passing garbage pointers to usb_free_urb(). Mirror the teardown that stop_streaming() already performs: on the error path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs() before unlocking. Both helpers are idempotent (free_urbs kills and zeros urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the buf_num counter), so partial-failure paths and the no-allocation paths remain safe. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-86043 | 1 Zalando | 1 Skipper | 2026-09-18 | 7.5 High |
| Skipper is an HTTP router and reverse proxy for service composition. Prior to version 0.27.37, the opaAuthorizeRequestWithBody filter can authorize an oversized request after Skipper truncates the body presented to Open Policy Agent because the input.truncated_body signal is derived from Content-Length rather than the actual read result. In filters/openpolicyagent/openpolicyagent.go, ExtractHttpBodyOptionally truncates bodies at maxBodyBytes, while filters/openpolicyagent/internal/envoy/skipperadapter.go copies the request headers without adding a Content-Length value that reflects the truncation. For an HTTP/1.1 request using Transfer-Encoding: chunked or an HTTP/2 request without Content-Length, a body-inspecting policy that follows the prior mitigation and permits input.truncated_body equal to false can evaluate only the truncated prefix, allow the request, and then forward the full oversized body to the protected upstream. This residual issue is distinct from CVE-2026-50197. This issue is fixed in version 0.27.37. | ||||
| CVE-2026-76646 | 1 Apache | 1 Myfaces | 2026-09-18 | 7.5 High |
| A remote attacker could cause excessive resource consumption by supplying specially crafted request parameters, potentially resulting in a denial of service condition. Older unsupported versions may also be affected. Users are recommended to upgrade to versions 2.3.12, 2.3-next-M9, 3.0.4, 4.0.4, or 4.1.4, which fix this issue. | ||||
| CVE-2026-87024 | 1 Tanium | 1 Asset | 2026-09-18 | 7.2 High |
| Tanium addressed a SQL injection vulnerability in Asset. | ||||
| CVE-2026-92763 | 1 Rundeck | 1 Rundeck | 2026-09-18 | 8.1 High |
| Rundeck through 6.2.1 fails to properly authorize the importConfig and importNodesSources parameters in the project archive import endpoint. Attackers with only the import action can replace project configuration files including security-relevant settings like node executors and SSH key paths that affect job execution. | ||||
| CVE-2026-61592 | 1 Djust-org | 1 Djust | 2026-09-18 | 7.4 High |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, SSE sessions were keyed solely by a client-chosen `session_id` with no binding to the authenticated user — a control the WebSocket transport has but that was dropped on SSE. An attacker who learns (or a victim who leaks) a `session_id` could connect to the message endpoint and dispatch event handlers that execute with the victim's identity and state. This is fixed in djust 1.0.7. Each SSE session is bound to its owning principal at creation and cross-principal access is rejected; SSE session creation is additionally capped per principal. As a workaround, disable the SSE transport. | ||||
| CVE-2026-92801 | 1 Chenhg5 | 1 Cc-connect | 2026-09-18 | 8.8 High |
| cc-connect through 1.5.0 fails to enforce per-user allowlist filtering in the onCardAction handler for Feishu interactive card callbacks. Attackers can dispatch agent commands by triggering card actions in admitted chats, bypassing the per-user access controls that protect the text message handler. | ||||
| CVE-2026-87273 | 1 Oracle | 1 Vm Virtualbox | 2026-09-18 | 8.6 High |
| Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 8.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:H). | ||||
| CVE-2026-92596 | 1 Nodemailer | 1 Nodemailer | 2026-09-18 | 7.5 High |
| Nodemailer before 9.1.0 contains a quadratic time complexity vulnerability in the addressparser component that allows remote attackers to cause denial of service by supplying a crafted comma-separated address list. Attackers can send a single email with a large number of addresses to block the Node.js event loop for extended periods, consuming 100% CPU and freezing the process. | ||||
| CVE-2026-83483 | 1 Oracle | 1 Advanced Benefits | 2026-09-17 | 8 High |
| Vulnerability in the Oracle Advanced Benefits product of Oracle E-Business Suite (component: Self-serv What-if Analysis). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Advanced Benefits. While the vulnerability is in Oracle Advanced Benefits, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Advanced Benefits. CVSS 3.1 Base Score 8.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H). | ||||
| CVE-2026-87139 | 1 Oracle | 1 Hyperion Data Relationship Management | 2026-09-17 | 7.5 High |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.26.0.000. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Data Relationship Management. Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Data Relationship Management. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-87150 | 1 Oracle | 1 Bills Of Material | 2026-09-17 | 8.8 High |
| Vulnerability in the Oracle Bills of Material product of Oracle E-Business Suite (component: Setup Workbench). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Bills of Material. Successful attacks of this vulnerability can result in takeover of Oracle Bills of Material. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-87155 | 1 Oracle | 1 Product Hub | 2026-09-17 | 8.8 High |
| Vulnerability in the Oracle Product Hub product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Product Hub. Successful attacks of this vulnerability can result in takeover of Oracle Product Hub. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-87162 | 1 Oracle | 1 Contract Lifecycle Management For Public Sector | 2026-09-17 | 8.8 High |
| Vulnerability in the Oracle Contract Lifecycle Management for Public Sector product of Oracle E-Business Suite (component: Award/PO). Supported versions that are affected are 12.2.13-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Contract Lifecycle Management for Public Sector. Successful attacks of this vulnerability can result in takeover of Oracle Contract Lifecycle Management for Public Sector. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||