Export limit exceeded: 25322 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25322 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50580 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-throttle: prevent overflow while calculating wait time There is a problem found by code review in tg_with_in_bps_limit() that 'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by calling mul_u64_u64_div_u64() instead. | ||||
| CVE-2022-50825 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe() I got the following report while doing fault injection test: OF: ERROR: memory leak, expected refcount 1 instead of 4, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/tcpc@60/connector If wusb3801_hw_init() fails, fwnode_handle_put() needs be called to avoid refcount leak. | ||||
| CVE-2022-50826 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection() Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose() with a subdev state of NULL leads to a NULL pointer dereference. This can currently happen in imgu_subdev_set_selection() when the state passed in is NULL, as this method first gets pointers to both the "try" and "active" states and only then decides which to use. The same issue has been addressed for imgu_subdev_get_selection() with commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active selection access"). However the issue still persists in imgu_subdev_set_selection(). Therefore, apply a similar fix as done in the aforementioned commit to imgu_subdev_set_selection(). To keep things a bit cleaner, introduce helper functions for "crop" and "compose" access and use them in both imgu_subdev_set_selection() and imgu_subdev_get_selection(). | ||||
| CVE-2022-50827 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix memory leak in lpfc_create_port() Commit 5e633302ace1 ("scsi: lpfc: vmid: Add support for VMID in mailbox command") introduced allocations for the VMID resources in lpfc_create_port() after the call to scsi_host_alloc(). Upon failure on the VMID allocations, the new code would branch to the 'out' label, which returns NULL without unwinding anything, thus skipping the call to scsi_host_put(). Fix the problem by creating a separate label 'out_free_vmid' to unwind the VMID resources and make the 'out_put_shost' label call only scsi_host_put(), as was done before the introduction of allocations for VMID. | ||||
| CVE-2022-50828 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: zynqmp: Fix stack-out-of-bounds in strncpy` "BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68" Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is longer than 15 bytes, string terminated NULL character will not be received by Linux. Add explicit NULL character at last byte to fix issues when clock name is longer. This fixes below bug reported by KASAN: ================================================================== BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68 Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3 Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT) Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x14/0x20 dump_stack+0xd4/0x108 print_address_description.isra.0+0xbc/0x37c __kasan_report+0x144/0x198 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 strncpy+0x30/0x68 zynqmp_clock_probe+0x238/0x7b8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 __device_attach_driver+0xc4/0xe8 bus_for_each_drv+0xec/0x150 __device_attach+0x160/0x1d8 device_initial_probe+0x10/0x18 bus_probe_device+0xe0/0xf0 device_add+0x528/0x950 of_device_add+0x5c/0x80 of_platform_device_create_pdata+0x120/0x168 of_platform_bus_create+0x244/0x4e0 of_platform_populate+0x50/0xe8 zynqmp_firmware_probe+0x370/0x3a8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 device_driver_attach+0x94/0xa0 __driver_attach+0x70/0x108 bus_for_each_dev+0xe4/0x158 driver_attach+0x30/0x40 bus_add_driver+0x21c/0x2b8 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 zynqmp_firmware_driver_init+0x1c/0x24 do_one_initcall+0xa4/0x234 kernel_init_freeable+0x1b0/0x24c kernel_init+0x10/0x110 ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff page dumped because: kasan: bad access detected addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame: zynqmp_clock_probe+0x0/0x7b8 this frame has 3 objects: [32, 44) 'response' [64, 80) 'ret_payload' [96, 112) 'name' Memory state around the buggy address: ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2 >ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== | ||||
| CVE-2022-50571 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: call __btrfs_remove_free_space_cache_locked on cache load failure Now that lockdep is staying enabled through our entire CI runs I started seeing the following stack in generic/475 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 2171864 at fs/btrfs/discard.c:604 btrfs_discard_update_discardable+0x98/0xb0 CPU: 1 PID: 2171864 Comm: kworker/u4:0 Not tainted 5.19.0-rc8+ #789 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: btrfs-cache btrfs_work_helper RIP: 0010:btrfs_discard_update_discardable+0x98/0xb0 RSP: 0018:ffffb857c2f7bad0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8c85c605c200 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffff86807c5b RDI: ffffffff868a831e RBP: ffff8c85c4c54000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8c85c66932f0 R11: 0000000000000001 R12: ffff8c85c3899010 R13: ffff8c85d5be4f40 R14: ffff8c85c4c54000 R15: ffff8c86114bfa80 FS: 0000000000000000(0000) GS:ffff8c863bd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2e7f168160 CR3: 000000010289a004 CR4: 0000000000370ee0 Call Trace: __btrfs_remove_free_space_cache+0x27/0x30 load_free_space_cache+0xad2/0xaf0 caching_thread+0x40b/0x650 ? lock_release+0x137/0x2d0 btrfs_work_helper+0xf2/0x3e0 ? lock_is_held_type+0xe2/0x140 process_one_work+0x271/0x590 ? process_one_work+0x590/0x590 worker_thread+0x52/0x3b0 ? process_one_work+0x590/0x590 kthread+0xf0/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 This is the code ctl = block_group->free_space_ctl; discard_ctl = &block_group->fs_info->discard_ctl; lockdep_assert_held(&ctl->tree_lock); We have a temporary free space ctl for loading the free space cache in order to avoid having allocations happening while we're loading the cache. When we hit an error we free it all up, however this also calls btrfs_discard_update_discardable, which requires block_group->free_space_ctl->tree_lock to be held. However this is our temporary ctl so this lock isn't held. Fix this by calling __btrfs_remove_free_space_cache_locked instead so that we only clean up the entries and do not mess with the discardable stats. | ||||
| CVE-2022-50829 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb() It is possible that skb is freed in ath9k_htc_rx_msg(), then usb_submit_urb() fails and we try to free skb again. It causes use-after-free bug. Moreover, if alloc_skb() fails, urb->context becomes NULL but rx_buf is not freed and there can be a memory leak. The patch removes unnecessary nskb and makes skb processing more clear: it is supposed that ath9k_htc_rx_msg() either frees old skb or passes its managing to another callback function. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2022-50830 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: auxdisplay: hd44780: Fix potential memory leak in hd44780_remove() hd44780_probe() allocates a memory chunk for hd with kzalloc() and makes "lcd->drvdata->hd44780" point to it. When we call hd44780_remove(), we should release all relevant memory and resource. But "lcd->drvdata ->hd44780" is not released, which will lead to a memory leak. We should release the "lcd->drvdata->hd44780" in hd44780_remove() to fix the memory leak bug. | ||||
| CVE-2022-50832 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix potential memory leak in wilc_mac_xmit() The wilc_mac_xmit() returns NETDEV_TX_OK without freeing skb, add dev_kfree_skb() to fix it. Compile tested only. | ||||
| CVE-2022-50833 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works syzbot is reporting attempt to schedule hdev->cmd_work work from system_wq WQ into hdev->workqueue WQ which is under draining operation [1], for commit c8efcc2589464ac7 ("workqueue: allow chained queueing during destruction") does not allow such operation. The check introduced by commit 877afadad2dce8aa ("Bluetooth: When HCI work queue is drained, only queue chained work") was incomplete. Use hdev->workqueue WQ when queuing hdev->{cmd,ncmd}_timer works because hci_{cmd,ncmd}_timeout() calls queue_work(hdev->workqueue). Also, protect the queuing operation with RCU read lock in order to avoid calling queue_delayed_work() after cancel_delayed_work() completed. | ||||
| CVE-2022-50835 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: add miss release buffer head in fc_do_one_pass() In fc_do_one_pass() miss release buffer head after use which will lead to reference count leak. | ||||
| CVE-2022-50836 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev() The kfree() should be called when of_irq_get_byname() fails or devm_request_threaded_irq() fails in qcom_add_sysmon_subdev(), otherwise there will be a memory leak, so add kfree() to fix it. | ||||
| CVE-2022-50837 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path If dsa_tag_8021q_setup() fails, for example due to the inability of the device to install a VLAN, the tag_8021q context of the switch will leak. Make sure it is freed on the error path. | ||||
| CVE-2022-50838 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stream: purge sk_error_queue in sk_stream_kill_queues() Changheon Lee reported TCP socket leaks, with a nice repro. It seems we leak TCP sockets with the following sequence: 1) SOF_TIMESTAMPING_TX_ACK is enabled on the socket. Each ACK will cook an skb put in error queue, from __skb_tstamp_tx(). __skb_tstamp_tx() is using skb_clone(), unless SOF_TIMESTAMPING_OPT_TSONLY was also requested. 2) If the application is also using MSG_ZEROCOPY, then we put in the error queue cloned skbs that had a struct ubuf_info attached to them. Whenever an struct ubuf_info is allocated, sock_zerocopy_alloc() does a sock_hold(). As long as the cloned skbs are still in sk_error_queue, socket refcount is kept elevated. 3) Application closes the socket, while error queue is not empty. Since tcp_close() no longer purges the socket error queue, we might end up with a TCP socket with at least one skb in error queue keeping the socket alive forever. This bug can be (ab)used to consume all kernel memory and freeze the host. We need to purge the error queue, with proper synchronization against concurrent writers. | ||||
| CVE-2022-50564 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/netiucv: Fix return type of netiucv_tx() With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = netiucv_tx, ^~~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Additionally, while in the area, remove a comment block that is no longer relevant. | ||||
| CVE-2022-50560 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/meson: explicitly remove aggregate driver at module unload time Because component_master_del wasn't being called when unloading the meson_drm module, the aggregate device would linger forever in the global aggregate_devices list. That means when unloading and reloading the meson_dw_hdmi module, component_add would call into try_to_bring_up_aggregate_device and find the unbound meson_drm aggregate device. This would in turn dereference some of the aggregate_device's struct entries which point to memory automatically freed by the devres API when unbinding the aggregate device from meson_drv_unbind, and trigger an use-after-free bug: [ +0.000014] ============================================================= [ +0.000007] BUG: KASAN: use-after-free in find_components+0x468/0x500 [ +0.000017] Read of size 8 at addr ffff000006731688 by task modprobe/2536 [ +0.000018] CPU: 4 PID: 2536 Comm: modprobe Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1 [ +0.000010] Hardware name: Hardkernel ODROID-N2Plus (DT) [ +0.000008] Call trace: [ +0.000005] dump_backtrace+0x1ec/0x280 [ +0.000011] show_stack+0x24/0x80 [ +0.000007] dump_stack_lvl+0x98/0xd4 [ +0.000010] print_address_description.constprop.0+0x80/0x520 [ +0.000011] print_report+0x128/0x260 [ +0.000007] kasan_report+0xb8/0xfc [ +0.000007] __asan_report_load8_noabort+0x3c/0x50 [ +0.000009] find_components+0x468/0x500 [ +0.000008] try_to_bring_up_aggregate_device+0x64/0x390 [ +0.000009] __component_add+0x1dc/0x49c [ +0.000009] component_add+0x20/0x30 [ +0.000008] meson_dw_hdmi_probe+0x28/0x34 [meson_dw_hdmi] [ +0.000013] platform_probe+0xd0/0x220 [ +0.000008] really_probe+0x3ac/0xa80 [ +0.000008] __driver_probe_device+0x1f8/0x400 [ +0.000008] driver_probe_device+0x68/0x1b0 [ +0.000008] __driver_attach+0x20c/0x480 [ +0.000009] bus_for_each_dev+0x114/0x1b0 [ +0.000007] driver_attach+0x48/0x64 [ +0.000009] bus_add_driver+0x390/0x564 [ +0.000007] driver_register+0x1a8/0x3e4 [ +0.000009] __platform_driver_register+0x6c/0x94 [ +0.000007] meson_dw_hdmi_platform_driver_init+0x30/0x1000 [meson_dw_hdmi] [ +0.000014] do_one_initcall+0xc4/0x2b0 [ +0.000008] do_init_module+0x154/0x570 [ +0.000010] load_module+0x1a78/0x1ea4 [ +0.000008] __do_sys_init_module+0x184/0x1cc [ +0.000008] __arm64_sys_init_module+0x78/0xb0 [ +0.000008] invoke_syscall+0x74/0x260 [ +0.000008] el0_svc_common.constprop.0+0xcc/0x260 [ +0.000009] do_el0_svc+0x50/0x70 [ +0.000008] el0_svc+0x68/0x1a0 [ +0.000009] el0t_64_sync_handler+0x11c/0x150 [ +0.000009] el0t_64_sync+0x18c/0x190 [ +0.000014] Allocated by task 902: [ +0.000007] kasan_save_stack+0x2c/0x5c [ +0.000009] __kasan_kmalloc+0x90/0xd0 [ +0.000007] __kmalloc_node+0x240/0x580 [ +0.000010] memcg_alloc_slab_cgroups+0xa4/0x1ac [ +0.000010] memcg_slab_post_alloc_hook+0xbc/0x4c0 [ +0.000008] kmem_cache_alloc_node+0x1d0/0x490 [ +0.000009] __alloc_skb+0x1d4/0x310 [ +0.000010] alloc_skb_with_frags+0x8c/0x620 [ +0.000008] sock_alloc_send_pskb+0x5ac/0x6d0 [ +0.000010] unix_dgram_sendmsg+0x2e0/0x12f0 [ +0.000010] sock_sendmsg+0xcc/0x110 [ +0.000007] sock_write_iter+0x1d0/0x304 [ +0.000008] new_sync_write+0x364/0x460 [ +0.000007] vfs_write+0x420/0x5ac [ +0.000008] ksys_write+0x19c/0x1f0 [ +0.000008] __arm64_sys_write+0x78/0xb0 [ +0.000007] invoke_syscall+0x74/0x260 [ +0.000008] el0_svc_common.constprop.0+0x1a8/0x260 [ +0.000009] do_el0_svc+0x50/0x70 [ +0.000007] el0_svc+0x68/0x1a0 [ +0.000008] el0t_64_sync_handler+0x11c/0x150 [ +0.000008] el0t_64_sync+0x18c/0x190 [ +0.000013] Freed by task 2509: [ +0.000008] kasan_save_stack+0x2c/0x5c [ +0.000007] kasan_set_track+0x2c/0x40 [ +0.000008] kasan_set_free_info+0x28/0x50 [ +0.000008] ____kasan_slab_free+0x128/0x1d4 [ +0.000008] __kasan_slab_free+0x18/0x24 [ +0.000007] slab_free_freelist_hook+0x108/0x230 [ +0.000010] ---truncated--- | ||||
| CVE-2022-50839 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: fix potential buffer head reference count leak As in 'jbd2_fc_wait_bufs' if buffer isn't uptodate, will return -EIO without update 'journal->j_fc_off'. But 'jbd2_fc_release_bufs' will release buffer head from ‘j_fc_off - 1’ if 'bh' is NULL will terminal release which will lead to buffer head buffer head reference count leak. To solve above issue, update 'journal->j_fc_off' before return -EIO. | ||||
| CVE-2022-50698 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: da7219: Fix an error handling path in da7219_register_dai_clks() If clk_hw_register() fails, the corresponding clk should not be unregistered. To handle errors from loops, clean up partial iterations before doing the goto. So add a clk_hw_unregister(). Then use a while (--i >= 0) loop in the unwind section. | ||||
| CVE-2022-50775 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix refcount leak in hns_roce_mmap rdma_user_mmap_entry_get_pgoff() takes the reference. Add missing rdma_user_mmap_entry_put() to release the reference. Acked-by Haoyue Xu <xuhaoyue1@hisilicon.com> | ||||
| CVE-2022-50774 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix DMA transfer direction When CONFIG_DMA_API_DEBUG is selected, while running the crypto self test on the QAT crypto algorithms, the function add_dma_entry() reports a warning similar to the one below, saying that overlapping mappings are not supported. This occurs in tests where the input and the output scatter list point to the same buffers (i.e. two different scatter lists which point to the same chunks of memory). The logic that implements the mapping uses the flag DMA_BIDIRECTIONAL for both the input and the output scatter lists which leads to overlapped write mappings. These are not supported by the DMA layer. Fix by specifying the correct DMA transfer directions when mapping buffers. For in-place operations where the input scatter list matches the output scatter list, buffers are mapped once with DMA_BIDIRECTIONAL, otherwise input buffers are mapped using the flag DMA_TO_DEVICE and output buffers are mapped with DMA_FROM_DEVICE. Overlapping a read mapping with a write mapping is a valid case in dma-coherent devices like QAT. The function that frees and unmaps the buffers, qat_alg_free_bufl() has been changed accordingly to the changes to the mapping function. DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping mappings aren't supported WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270 ... Call Trace: dma_map_page_attrs+0x82/0x2d0 ? preempt_count_add+0x6a/0xa0 qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat] qat_alg_aead_dec+0x71/0x250 [intel_qat] crypto_aead_decrypt+0x3d/0x70 test_aead_vec_cfg+0x649/0x810 ? number+0x310/0x3a0 ? vsnprintf+0x2a3/0x550 ? scnprintf+0x42/0x70 ? valid_sg_divisions.constprop.0+0x86/0xa0 ? test_aead_vec+0xdf/0x120 test_aead_vec+0xdf/0x120 alg_test_aead+0x185/0x400 alg_test+0x3d8/0x500 ? crypto_acomp_scomp_free_ctx+0x30/0x30 ? __schedule+0x32a/0x12a0 ? ttwu_queue_wakelist+0xbf/0x110 ? _raw_spin_unlock_irqrestore+0x23/0x40 ? try_to_wake_up+0x83/0x570 ? _raw_spin_unlock_irqrestore+0x23/0x40 ? __set_cpus_allowed_ptr_locked+0xea/0x1b0 ? crypto_acomp_scomp_free_ctx+0x30/0x30 cryptomgr_test+0x27/0x50 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 | ||||