Export limit exceeded: 29044 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25322 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25322 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40308 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bcsp: receive data only if registered Currently, bcsp_recv() can be called even when the BCSP protocol has not been registered. This leads to a NULL pointer dereference, as shown in the following stack trace: KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590 Call Trace: <TASK> hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627 tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290 tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f To prevent this, ensure that the HCI_UART_REGISTERED flag is set before processing received data. If the protocol is not registered, return -EUNATCH. | ||||
| CVE-2025-40329 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb The Mesa issue referenced below pointed out a possible deadlock: [ 1231.611031] Possible interrupt unsafe locking scenario: [ 1231.611033] CPU0 CPU1 [ 1231.611034] ---- ---- [ 1231.611035] lock(&xa->xa_lock#17); [ 1231.611038] local_irq_disable(); [ 1231.611039] lock(&fence->lock); [ 1231.611041] lock(&xa->xa_lock#17); [ 1231.611044] <Interrupt> [ 1231.611045] lock(&fence->lock); [ 1231.611047] *** DEADLOCK *** In this example, CPU0 would be any function accessing job->dependencies through the xa_* functions that don't disable interrupts (eg: drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()). CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling callback so in an interrupt context. It will deadlock when trying to grab the xa_lock which is already held by CPU0. Replacing all xa_* usage by their xa_*_irq counterparts would fix this issue, but Christian pointed out another issue: dma_fence_signal takes fence.lock and so does dma_fence_add_callback. dma_fence_signal() // locks f1.lock -> drm_sched_entity_kill_jobs_cb() -> foreach dependencies -> dma_fence_add_callback() // locks f2.lock This will deadlock if f1 and f2 share the same spinlock. To fix both issues, the code iterating on dependencies and re-arming them is moved out to drm_sched_entity_kill_jobs_work(). [phasta: commit message nits] | ||||
| CVE-2025-68318 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL The AXI crossbar of TH1520 has no proper timeout handling, which means gating AXI clocks can easily lead to bus timeout and thus system hang. Set all AXI clock gates to CLK_IS_CRITICAL. All these clock gates are ungated by default on system reset. In addition, convert all current CLK_IGNORE_UNUSED usage to CLK_IS_CRITICAL to prevent unwanted clock gating. | ||||
| CVE-2025-40310 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw There is race in amdgpu_amdkfd_device_fini_sw and interrupt. if amdgpu_amdkfd_device_fini_sw run in b/w kfd_cleanup_nodes and kfree(kfd), and KGD interrupt generated. kernel panic log: BUG: kernel NULL pointer dereference, address: 0000000000000098 amdgpu 0000:c8:00.0: amdgpu: Requesting 4 partitions through PSP PGD d78c68067 P4D d78c68067 kfd kfd: amdgpu: Allocated 3969056 bytes on gart PUD 1465b8067 PMD @ Oops: @002 [#1] SMP NOPTI kfd kfd: amdgpu: Total number of KFD nodes to be created: 4 CPU: 115 PID: @ Comm: swapper/115 Kdump: loaded Tainted: G S W OE K RIP: 0010:_raw_spin_lock_irqsave+0x12/0x40 Code: 89 e@ 41 5c c3 cc cc cc cc 66 66 2e Of 1f 84 00 00 00 00 00 OF 1f 40 00 Of 1f 44% 00 00 41 54 9c 41 5c fa 31 cO ba 01 00 00 00 <fO> OF b1 17 75 Ba 4c 89 e@ 41 Sc 89 c6 e8 07 38 5d RSP: 0018: ffffc90@1a6b0e28 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000018 0000000000000001 RSI: ffff8883bb623e00 RDI: 0000000000000098 ffff8883bb000000 RO8: ffff888100055020 ROO: ffff888100055020 0000000000000000 R11: 0000000000000000 R12: 0900000000000002 ffff888F2b97da0@ R14: @000000000000098 R15: ffff8883babdfo00 CS: 010 DS: 0000 ES: 0000 CRO: 0000000080050033 CR2: 0000000000000098 CR3: 0000000e7cae2006 CR4: 0000000002770ce0 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 0000000000000000 DR6: 00000000fffeO7FO DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> kgd2kfd_interrupt+@x6b/0x1f@ [amdgpu] ? amdgpu_fence_process+0xa4/0x150 [amdgpu] kfd kfd: amdgpu: Node: 0, interrupt_bitmap: 3 YcpxFl Rant tErace amdgpu_irq_dispatch+0x165/0x210 [amdgpu] amdgpu_ih_process+0x80/0x100 [amdgpu] amdgpu: Virtual CRAT table created for GPU amdgpu_irq_handler+0x1f/@x60 [amdgpu] __handle_irq_event_percpu+0x3d/0x170 amdgpu: Topology: Add dGPU node [0x74a2:0x1002] handle_irq_event+0x5a/@xcO handle_edge_irq+0x93/0x240 kfd kfd: amdgpu: KFD node 1 partition @ size 49148M asm_call_irq_on_stack+0xf/@x20 </IRQ> common_interrupt+0xb3/0x130 asm_common_interrupt+0x1le/0x40 5.10.134-010.a1i5000.a18.x86_64 #1 | ||||
| CVE-2025-12779 | 2 Amazon, Linux | 2 Workspaces, Linux | 2026-04-15 | 8.8 High |
| Improper handling of the authentication token in the Amazon WorkSpaces client for Linux, versions 2023.0 through 2024.8, may expose the authentication token for DCV-based WorkSpaces to other local users on the same client machine. Under certain circumstances, a local user may be able to extract another local user's authentication token from the shared client machine and access their WorkSpace. To mitigate this issue, users should upgrade to the Amazon WorkSpaces client for Linux version 2025.0 or later. | ||||
| CVE-2025-40288 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix NULL pointer dereference in VRAM logic for APU devices Previously, APU platforms (and other scenarios with uninitialized VRAM managers) triggered a NULL pointer dereference in `ttm_resource_manager_usage()`. The root cause is not that the `struct ttm_resource_manager *man` pointer itself is NULL, but that `man->bdev` (the backing device pointer within the manager) remains uninitialized (NULL) on APUs—since APUs lack dedicated VRAM and do not fully set up VRAM manager structures. When `ttm_resource_manager_usage()` attempts to acquire `man->bdev->lru_lock`, it dereferences the NULL `man->bdev`, leading to a kernel OOPS. 1. **amdgpu_cs.c**: Extend the existing bandwidth control check in `amdgpu_cs_get_threshold_for_moves()` to include a check for `ttm_resource_manager_used()`. If the manager is not used (uninitialized `bdev`), return 0 for migration thresholds immediately—skipping VRAM-specific logic that would trigger the NULL dereference. 2. **amdgpu_kms.c**: Update the `AMDGPU_INFO_VRAM_USAGE` ioctl and memory info reporting to use a conditional: if the manager is used, return the real VRAM usage; otherwise, return 0. This avoids accessing `man->bdev` when it is NULL. 3. **amdgpu_virt.c**: Modify the vf2pf (virtual function to physical function) data write path. Use `ttm_resource_manager_used()` to check validity: if the manager is usable, calculate `fb_usage` from VRAM usage; otherwise, set `fb_usage` to 0 (APUs have no discrete framebuffer to report). This approach is more robust than APU-specific checks because it: - Works for all scenarios where the VRAM manager is uninitialized (not just APUs), - Aligns with TTM's design by using its native helper function, - Preserves correct behavior for discrete GPUs (which have fully initialized `man->bdev` and pass the `ttm_resource_manager_used()` check). v4: use ttm_resource_manager_used(&adev->mman.vram_mgr.manager) instead of checking the adev->gmc.is_app_apu flag (Christian) | ||||
| CVE-2025-68758 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: backlight: led-bl: Add devlink to supplier LEDs LED Backlight is a consumer of one or multiple LED class devices, but devlink is currently unable to create correct supplier-producer links when the supplier is a class device. It creates instead a link where the supplier is the parent of the expected device. One consequence is that removal order is not correctly enforced. Issues happen for example with the following sections in a device tree overlay: // An LED driver chip pca9632@62 { compatible = "nxp,pca9632"; reg = <0x62>; // ... addon_led_pwm: led-pwm@3 { reg = <3>; label = "addon:led:pwm"; }; }; backlight-addon { compatible = "led-backlight"; leds = <&addon_led_pwm>; brightness-levels = <255>; default-brightness-level = <255>; }; In this example, the devlink should be created between the backlight-addon (consumer) and the pca9632@62 (supplier). Instead it is created between the backlight-addon (consumer) and the parent of the pca9632@62, which is typically the I2C bus adapter. On removal of the above overlay, the LED driver can be removed before the backlight device, resulting in: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... Call trace: led_put+0xe0/0x140 devm_led_release+0x6c/0x98 Another way to reproduce the bug without any device tree overlays is unbinding the LED class device (pca9632@62) before unbinding the consumer (backlight-addon): echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind Fix by adding a devlink between the consuming led-backlight device and the supplying LED device, as other drivers and subsystems do as well. | ||||
| CVE-2025-68282 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: fix use-after-free in usb_gadget_state_work A race condition during gadget teardown can lead to a use-after-free in usb_gadget_state_work(), as reported by KASAN: BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0 Workqueue: events usb_gadget_state_work The fundamental race occurs because a concurrent event (e.g., an interrupt) can call usb_gadget_set_state() and schedule gadget->work at any time during the cleanup process in usb_del_gadget(). Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after device removal") attempted to fix this by moving flush_work() to after device_del(). However, this does not fully solve the race, as a new work item can still be scheduled *after* flush_work() completes but before the gadget's memory is freed, leading to the same use-after-free. This patch fixes the race condition robustly by introducing a 'teardown' flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is set during cleanup in usb_del_gadget() *before* calling flush_work() to prevent any new work from being scheduled once cleanup has commenced. The scheduling site, usb_gadget_set_state(), now checks this flag under the lock before queueing the work, thus safely closing the race window. | ||||
| CVE-2025-68281 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list "struct sdca_control" declares "values" field as integer array. But the memory allocated to it is of char array. This causes crash for sdca_parse_function API. This patch addresses the issue by allocating correct data size. | ||||
| CVE-2025-40050 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer In check_alu_op(), the verifier currently calls check_reg_arg() and adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations. However, if the destination register holds a pointer, these scalar adjustments are unnecessary and potentially incorrect. This patch adds a check to skip the adjustment logic when the destination register contains a pointer. | ||||
| CVE-2025-40032 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be NULL even after EPF initialization. Then it is prudent to check that they have non-NULL values before releasing the channels. Add the checks in pci_epf_test_clean_dma_chan(). Without the checks, NULL pointer dereferences happen and they can lead to a kernel panic in some cases: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Call trace: dma_release_channel+0x2c/0x120 (P) pci_epf_test_epc_deinit+0x94/0xc0 [pci_epf_test] pci_epc_deinit_notify+0x74/0xc0 tegra_pcie_ep_pex_rst_irq+0x250/0x5d8 irq_thread_fn+0x34/0xb8 irq_thread+0x18c/0x2e8 kthread+0x14c/0x210 ret_from_fork+0x10/0x20 [mani: trimmed the stack trace] | ||||
| CVE-2025-40030 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: check the return value of pinmux_ops::get_function_name() While the API contract in docs doesn't specify it explicitly, the generic implementation of the get_function_name() callback from struct pinmux_ops - pinmux_generic_get_function_name() - can fail and return NULL. This is already checked in pinmux_check_ops() so add a similar check in pinmux_func_name_to_selector() instead of passing the returned pointer right down to strcmp() where the NULL can get dereferenced. This is normal operation when adding new pinfunctions. | ||||
| CVE-2025-40065 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Write hgatp register with valid mode bits According to the RISC-V Privileged Architecture Spec, when MODE=Bare is selected,software must write zero to the remaining fields of hgatp. We have detected the valid mode supported by the HW before, So using a valid mode to detect how many vmid bits are supported. | ||||
| CVE-2025-68288 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: storage: Fix memory leak in USB bulk transport A kernel memory leak was identified by the 'ioctl_sg01' test from Linux Test Project (LTP). The following bytes were mainly observed: 0x53425355. When USB storage devices incorrectly skip the data phase with status data, the code extracts/validates the CSW from the sg buffer, but fails to clear it afterwards. This leaves status protocol data in srb's transfer buffer, such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can lead to USB protocols leaks to user space through SCSI generic (/dev/sg*) interfaces, such as the one seen here when the LTP test requested 512 KiB. Fix the leak by zeroing the CSW data in srb's transfer buffer immediately after the validation of devices that skip data phase. Note: Differently from CVE-2018-1000204, which fixed a big leak by zero- ing pages at allocation time, this leak occurs after allocation, when USB protocol data is written to already-allocated sg pages. | ||||
| CVE-2025-40076 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq() Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because the object of type struct irq_domain_info passed to: msi_create_parent_irq_domain() -> irq_domain_instantiate()() -> __irq_domain_instantiate() has no reference to the parent IRQ domain. Using msi->domain->parent as an argument for generic_handle_domain_irq() leads to below error: "Unable to handle kernel NULL pointer dereference at virtual address" This error was identified while switching the upcoming RZ/G3S PCIe host controller driver to msi_create_parent_irq_domain() (which was using a similar pattern to handle MSIs (see link section)), but it was not tested on hardware using the pcie-rcar-host controller driver due to lack of hardware. [mani: reworded subject and description] | ||||
| CVE-2025-40062 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs When the initialization of qm->debug.acc_diff_reg fails, the probe process does not exit. However, after qm->debug.qm_diff_regs is freed, it is not set to NULL. This can lead to a double free when the remove process attempts to free it again. Therefore, qm->debug.qm_diff_regs should be set to NULL after it is freed. | ||||
| CVE-2025-40110 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a null-ptr access in the cursor snooper Check that the resource which is converted to a surface exists before trying to use the cursor snooper on it. vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers because some svga commands accept SVGA3D_INVALID_ID to mean "no surface", unfortunately functions that accept the actual surfaces as objects might (and in case of the cursor snooper, do not) be able to handle null objects. Make sure that we validate not only the identifier (via the vmw_cmd_res_check) but also check that the actual resource exists before trying to do something with it. Fixes unchecked null-ptr reference in the snooping code. | ||||
| CVE-2025-68797 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: char: applicom: fix NULL pointer dereference in ac_ioctl Discovered by Atuin - Automated Vulnerability Discovery Engine. In ac_ioctl, the validation of IndexCard and the check for a valid RamIO pointer are skipped when cmd is 6. However, the function unconditionally executes readb(apbs[IndexCard].RamIO + VERS) at the end. If cmd is 6, IndexCard may reference a board that does not exist (where RamIO is NULL), leading to a NULL pointer dereference. Fix this by skipping the readb access when cmd is 6, as this command is a global information query and does not target a specific board context. | ||||
| CVE-2025-68807 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix race between wbt_enable_default and IO submission When wbt_enable_default() is moved out of queue freezing in elevator_change(), it can cause the wbt inflight counter to become negative (-1), leading to hung tasks in the writeback path. Tasks get stuck in wbt_wait() because the counter is in an inconsistent state. The issue occurs because wbt_enable_default() could race with IO submission, allowing the counter to be decremented before proper initialization. This manifests as: rq_wait[0]: inflight: -1 has_waiters: True rwb_enabled() checks the state, which can be updated exactly between wbt_wait() (rq_qos_throttle()) and wbt_track()(rq_qos_track()), then the inflight counter will become negative. And results in hung task warnings like: task:kworker/u24:39 state:D stack:0 pid:14767 Call Trace: rq_qos_wait+0xb4/0x150 wbt_wait+0xa9/0x100 __rq_qos_throttle+0x24/0x40 blk_mq_submit_bio+0x672/0x7b0 ... Fix this by: 1. Splitting wbt_enable_default() into: - __wbt_enable_default(): Returns true if wbt_init() should be called - wbt_enable_default(): Wrapper for existing callers (no init) - wbt_init_enable_default(): New function that checks and inits WBT 2. Using wbt_init_enable_default() in blk_register_queue() to ensure proper initialization during queue registration 3. Move wbt_init() out of wbt_enable_default() which is only for enabling disabled wbt from bfq and iocost, and wbt_init() isn't needed. Then the original lock warning can be avoided. 4. Removing the ELEVATOR_FLAG_ENABLE_WBT_ON_EXIT flag and its handling code since it's no longer needed This ensures WBT is properly initialized before any IO can be submitted, preventing the counter from going negative. | ||||
| CVE-2025-68802 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Limit num_syncs to prevent oversized allocations The exec and vm_bind ioctl allow userspace to specify an arbitrary num_syncs value. Without bounds checking, a very large num_syncs can force an excessively large allocation, leading to kernel warnings from the page allocator as below. Introduce DRM_XE_MAX_SYNCS (set to 1024) and reject any request exceeding this limit. " ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1217 at mm/page_alloc.c:5124 __alloc_frozen_pages_noprof+0x2f8/0x2180 mm/page_alloc.c:5124 ... Call Trace: <TASK> alloc_pages_mpol+0xe4/0x330 mm/mempolicy.c:2416 ___kmalloc_large_node+0xd8/0x110 mm/slub.c:4317 __kmalloc_large_node_noprof+0x18/0xe0 mm/slub.c:4348 __do_kmalloc_node mm/slub.c:4364 [inline] __kmalloc_noprof+0x3d4/0x4b0 mm/slub.c:4388 kmalloc_noprof include/linux/slab.h:909 [inline] kmalloc_array_noprof include/linux/slab.h:948 [inline] xe_exec_ioctl+0xa47/0x1e70 drivers/gpu/drm/xe/xe_exec.c:158 drm_ioctl_kernel+0x1f1/0x3e0 drivers/gpu/drm/drm_ioctl.c:797 drm_ioctl+0x5e7/0xc50 drivers/gpu/drm/drm_ioctl.c:894 xe_drm_ioctl+0x10b/0x170 drivers/gpu/drm/xe/xe_device.c:224 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:598 [inline] __se_sys_ioctl fs/ioctl.c:584 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xbb/0x380 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... " v2: Add "Reported-by" and Cc stable kernels. v3: Change XE_MAX_SYNCS from 64 to 1024. (Matt & Ashutosh) v4: s/XE_MAX_SYNCS/DRM_XE_MAX_SYNCS/ (Matt) v5: Do the check at the top of the exec func. (Matt) (cherry picked from commit b07bac9bd708ec468cd1b8a5fe70ae2ac9b0a11c) | ||||