Export limit exceeded: 11003 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11003 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-69308 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-09-30 | 5.5 Medium |
| Out-of-bounds read in Microsoft Standard XPS allows an authorized attacker to disclose information locally. | ||||
| CVE-2026-69317 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-09-30 | 5.7 Medium |
| Out-of-bounds read in Remote Desktop Client allows an authorized attacker to disclose information over a network. | ||||
| CVE-2026-69329 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-09-30 | 7.5 High |
| Out-of-bounds read in BranchCache allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-98041 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't predict JMP32 pointer vs zero comparisons Consider the following program: r1 = map_value; /* low 32 bits are zero at runtime */ r6 = 0xdead000000000000; if w1 != 0 goto l1; l0: r1 += r6; r2 = *(u64 *)(r1 + 0); exit; l1: r6 = 0; goto l0; At the moment is_branch_taken() reports the jump as always taken, because it does not distinguish between BPF_JMP and BPF_JMP32 comparisons when processing 'if w1 != 0 ...'. | ||||
| CVE-2026-98145 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject a command chain that carries no commands A chain whose command_count is zero passes the payload length check, because struct_size(payload, data, 0) is just the header. The fill loop then does not run, so offset stays zero and the request is submitted with a zero-length buffer. On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte before the buffer and faults on the vmap guard page. EXEC_CMD is reachable by any process that can open the render node. Reject the request instead. | ||||
| CVE-2026-98117 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix potential UAF/KASAN warning Currently, trace_cachefiles_coherency() is being passed a pointer to a __be64 lain over the coherency data in struct cachefiles_xattr so that it can display the first 8 bytes. However, the data is of variable length and could even be 0 bytes. This could lead to a UAF or KASAN warning. Fix this by making sure the buffer has room for at least 8 bytes and that those 8 bytes are pre-cleared. Further, those bytes are not 8-byte aligned, so fix the tracepoint to extract the data as four 2-byte words (they are 2-byte aligned) and reassemble the __be64. The compiler will convert this into a single 8-byte load where the CPU supports it. | ||||
| CVE-2026-96420 | 1 Wireshark | 1 Wireshark | 2026-09-30 | 4.7 Medium |
| Toshiba file parser crash in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service | ||||
| CVE-2026-95390 | 1 Wireshark | 1 Wireshark | 2026-09-30 | 5.5 Medium |
| PEAK CAN TRC file parser crash in 4.6.0 to 4.6.8 allows denial of service | ||||
| CVE-2026-102720 | 1 Eclipse | 1 Threadx Netx Duo | 2026-09-30 | N/A |
| A DHCP server, or anyone on the LAN who answers a DISCOVER first, can make the client read about a kilobyte past the end of the received message. The option walk keeps a pointer and an offset in step, and the only bound check uses the offset: ```c /* addons/dhcp/nxd_dhcp_client.c:7538, 7572 */ while (i < length - 1) { ... size = *(++data); /* data moves 1: type -> length byte */ data += size + 1; /* data moves size + 1 more */ i += size + 1; /* i moves only size + 1 */ } ``` A TLV option occupies size + 2 bytes. `data` is advanced by size + 2 in total, `i` by size + 1, so the offset falls one byte behind the real read position for every option the walk skips. After enough skipped options the check `i < length - 1` still holds while `data` is already past the end of the message, and the subsequent read of the type and length bytes comes from whatever follows. A single OFFER carrying a long run of skippable options is enough: ``` ERROR: AddressSanitizer: heap-buffer-overflow READ of size 1 at 0x61b000000794 thread T5 #0 _nx_dhcp_search_buffer addons/dhcp/nxd_dhcp_client.c:7541 #1 _nx_dhcp_get_option_value addons/dhcp/nxd_dhcp_client.c:7082 0x61b000000794 is located 164 bytes to the right of 1648-byte region ``` A well formed OFFER through the same path is handled normally, the client records the offer and moves to REQUESTING, so the difference is the option layout rather than the harness. The read runs in the DHCP client thread while the client is still unconfigured, so it happens on every boot in reach of a hostile DHCP responder. The values read are used to configure the interface, which is how the disclosed bytes become observable. Advance `i` by size + 2, or derive the bound from `data` rather than keeping a second counter. | ||||
| CVE-2026-84782 | 2 Openssl, Redhat | 2 Openssl, Hummingbird | 2026-09-29 | 8.2 High |
| Issue summary: The DTLS retransmission logic does not correctly handle a handshake message write that is suspended part-way through. The retransmitted message can be read past the message buffer and the retransmission overwrites the internal state the suspended write needs to resume correctly. Impact summary: The retransmitted message can disclose a heap memory to the peer as plaintext handshake data or cause a crash and a Denial of Service when the read reaches an unmapped memory region. CWE: CWE-125: Out-of-bounds Read Description: DTLS handshake messages can be written out in multiple fragments, and a write can suspend mid-message (returning WANT_WRITE) if the underlying transport temporarily cannot accept more data. While such a write is suspended, the DTLS retransmission timer may independently fire and ask the retransmission logic to resend an earlier, already-acknowledged-as-sent message from its retransmit queue. The retransmission logic reused the same internal buffer and position tracking as the message that was still being written, without resetting the position back to the start of the message being retransmitted. As a result the retransmission was read starting from wherever the suspended write had left off, producing a mislabelled message whose body was leftover bytes from the other, larger message still in flight - content that was never meant to be sent at that point, and which could run past the end of the allocated buffer. Separately, even when the retransmission is positioned correctly, allowing it to run to completion while another write is suspended overwrites the same shared bookkeeping that the suspended write depends on to resume. When the application later resumes the suspended write (via a subsequent SSL_read(), SSL_write(), SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a state inconsistent with the message and aborts the process in a debugging build. The fix resets the retransmission's read position to the start of the message before resending, and skips retransmission entirely whenever a handshake write is still suspended, deferring to the next call that resumes it instead. FIPS impact: no The affected code is outside the FIPS module boundary. | ||||
| CVE-2026-98110 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: bound firmware ID by TLV length The firmware ID is treated as a NUL-terminated string even though the TLV length is its only boundary. If the value does not contain a NUL terminator, snprintf() can read beyond the received response. Limit the conversion to the advertised TLV value length. | ||||
| CVE-2026-102822 | 1 Eugeny | 1 Russh | 2026-09-29 | 3.7 Low |
| Russh is a Rust SSH client and server library. Prior to 0.63.1, a connection configured to permit mac=none can negotiate it with a MAC-requiring CTR or CBC block cipher because the selection logic validates needs_mac() only when MAC selection fails. A remote peer can then send a packet with a decrypted length of zero, causing russh/src/cipher/mod.rs to shrink the previously read block before indexing buffer.buffer[16..], which panics and terminates the connection task. This issue is fixed in version 0.63.1. | ||||
| CVE-2026-97587 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: store available counter mask as bitmap The available-counter mask was a single unsigned long, but iteration uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object. Filling with an unsigned-long bit at index 32 and above is also wrong. Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word into CFG_MATCH when checking events, when allocating an index, and when stopping all counters. Set the counter base to i times BITS_PER_LONG. Share the CFG_MATCH ecall through a small helper so the 32-bit argument split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits above XLEN set, so the first word alone is not enough. [pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] | ||||
| CVE-2026-69367 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-09-29 | 5.5 Medium |
| Out-of-bounds read in Microsoft Standard XPS allows an authorized attacker to disclose information locally. | ||||
| CVE-2026-69376 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-09-29 | 5.5 Medium |
| Out-of-bounds read in Microsoft Standard XPS allows an authorized attacker to disclose information locally. | ||||
| CVE-2026-50291 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-09-29 | 5.5 Medium |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to versions 3.0.16.0 and 3.1.11.0, processing a crafted BMP file through oiiotool or an application linked to OpenImageIO can reach BMP palette handling in src/bmp.imageio/bmpinput.cpp with an empty color table. BmpInput::read_native_scanline then performs an invalid palette read while decoding an RLE-compressed scanline, causing a process crash and denial of service. This issue is fixed in versions 3.0.16.0 and 3.1.11.0. | ||||
| CVE-2026-59956 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-09-29 | 6.1 Medium |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.20.0, 3.1.15.0, and 3.2.0.3-beta1, An uncompressed 16-bit iff image with a z-buffer makes iffinput::readimg() allocate a temporary scanline from m_header.rgba_count but copy from it using m_header.pixel_bytes(), whose stride also includes z-buffer bytes. the oversized memcpy reads beyond the temporary heap buffer and copies adjacent memory into the output image, resulting in a crash or disclosure of adjacent heap data. The affected implementation is identified by src/iff.imageio/iffinput.cpp, IffInput::readimg(), m_header.rgba_count, and m_header.pixel_bytes(), which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.20.0, 3.1.15.0, and 3.2.0.3-beta1. | ||||
| CVE-2026-63420 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-09-29 | 5.5 Medium |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1, An indexed psd with transparency metadata creates fewer stored channel_buffers than the spec.nchannels value advertised by the rawcolor path. when oiio:rawcolor or psd:rawdata is enabled, psdinput::read_native_scanline() passes spec.nchannels to psdinput::interleave_row(), which indexes beyond channel_buffers, resulting in a heap out-of-bounds read and process crash. The affected implementation is identified by src/psd.imageio/psdinput.cpp, PSDInput::read_native_scanline(), PSDInput::interleave_row(), oiio:RawColor, psd:RawData, channel_buffers, and spec.nchannels, which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1. | ||||
| CVE-2026-63635 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-09-29 | 5.5 Medium |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1, A crafted psd with an invalid color_mode bypasses normal validation when oiio:rawcolor or psd:rawdata is enabled. psdinput::setup() then uses the attacker-controlled value to index fixed color-mode tables, causing a global out-of-bounds read and potentially a bogus allocation, resulting in denial of service. The affected implementation is identified by src/psd.imageio/psdinput.cpp, PSDInput::validate_header(), PSDInput::setup(), oiio:RawColor, psd:RawData, color_mode, and mode_channel_count, which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1. | ||||
| CVE-2026-65969 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-09-29 | 5.5 Medium |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1, A truncated tga can leave a pending gif frame that is processed during output close. gifsplitpalette() computes numpixels multiplied by the palette partition width in signed 32-bit arithmetic; a large image overflows that intermediate, corrupts subpixelsa, and drives an out-of-bounds read while building the gif palette, resulting in a process crash and denial of service. The affected implementation is identified by src/gif.imageio/gif.h, GifSplitPalette(), numPixels, subPixelsA, GIFOutput, and truncated TGA input, which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1. | ||||