Export limit exceeded: 108553 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (108553 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64362 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: lg-g15: cancel pending work on remove to fix a use-after-free lg_g15_data is allocated with devm and holds a work item. The report handlers schedule that work straight from device input. lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key, and lg_g510_leds_event() does it too. The worker dereferences the lg_g15_data back through container_of. The driver had no remove callback and never cancelled the work. So if a report scheduled the work and the keyboard was then unplugged, devres freed lg_g15_data while the work was still pending or running, and the worker touched freed memory. This is a use-after-free. It is reachable as a race on device unplug. Add a remove callback that cancels the work before devres frees the state. g15->work is only initialized for the models that schedule it (G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the cancel on g15->work.func to avoid cancelling a work that was never set up. The g15 NULL test mirrors the one already in lg_g15_raw_event(). | ||||
| CVE-2026-64363 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: appleir: fix UAF on pending key_up_timer in remove() appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open. key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key was pressed shortly before the device is disconnected, the timer can fire after hid_hw_stop() has freed input_dev but before the teardown drains it. A simple reorder is not sufficient. Putting the timer drain first still leaves a window where a USB URB completion (raw_event) running during hid_hw_stop() can call mod_timer() and re-arm the timer, which then fires after hidinput_disconnect() has freed input_dev. The same URB-completion window also lets raw_event() reach key_up(), key_down() and battery_flat() directly, all of which dereference appleir->input_dev. Introduce a 'removing' flag on struct appleir, gated by the existing spinlock. appleir_remove() sets the flag under the lock and then shuts down the timer with timer_shutdown_sync(), which both drains any in-flight callback and permanently disables further mod_timer() calls. appleir_raw_event() and key_up_tick() bail out early if the flag is set, so no path can arm or run the timer, or dereference appleir->input_dev, after remove() has started tearing down. The keyrepeat and flatbattery branches of appleir_raw_event() previously called into the input layer without holding the spinlock; take it now so the flag check is well-defined. This incidentally closes a pre-existing read-side race on appleir->current_key in the keyrepeat branch. This bug is structurally a sibling of commit 4db2af929279 ("HID: appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been present since the driver was introduced. | ||||
| CVE-2026-61483 | 1 Apache | 1 Lucy | 2026-09-04 | 7.5 High |
| ** UNSUPPORTED WHEN ASSIGNED ** Uncontrolled Recursion vulnerability in Apache Lucy. This issue affects Apache Lucy: all versions. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the ASF. Lucy is now maintained outside of the ASF at https://github.com/lucysearch | ||||
| CVE-2026-85178 | 1 Helicone | 1 Helicone | 2026-09-04 | 7.7 High |
| Helicone's VaultManager.getDecryptedProviderKeyById() function in the GET /v1/vault/key/{providerKeyId} endpoint fails to validate the requester's organization against the vault key's organization identifier. Attackers with admin or owner privileges in any organization can retrieve decrypted upstream provider credentials for other tenants, including plaintext OpenAI, Anthropic, and Bedrock API keys. | ||||
| CVE-2026-81292 | 2 Ido Kobelkowsky, Wordpress | 2 Simple Payment, Wordpress | 2026-09-04 | 7.1 High |
| Unauthenticated Cross Site Scripting (XSS) in Simple Payment <= 2.5.1 versions. | ||||
| CVE-2026-81300 | 2 Silverplugins217, Wordpress | 2 Calculation For Contact Form 7, Wordpress | 2026-09-04 | 7.1 High |
| Unauthenticated Cross Site Scripting (XSS) in Calculation For Contact Form 7 <= 1.0 versions. | ||||
| CVE-2026-81776 | 2 Advanpix, Wordpress | 2 Wp Quicklatex, Wordpress | 2026-09-04 | 7.1 High |
| Unauthenticated Cross Site Scripting (XSS) in WP QuickLaTeX <= 3.8.8 versions. | ||||
| CVE-2026-84765 | 2 John Havlik, Wordpress | 2 Breadcrumb Navxt, Wordpress | 2026-09-04 | 7.1 High |
| Unauthenticated Cross Site Scripting (XSS) in Breadcrumb NavXT <= 7.5.1 versions. | ||||
| CVE-2026-84773 | 2 Wordpress, 作者 | 2 Wordpress, Shane Bishop:ewww Image Optimizer | 2026-09-04 | 7.2 High |
| Unauthenticated Cross Site Scripting (XSS) in EWWW Image Optimizer <= 8.7.6 versions. | ||||
| CVE-2026-84776 | 2 Malcare, Wordpress | 2 Malcare Security, Wordpress | 2026-09-04 | 7.5 High |
| Unauthenticated Denial of Service Attack in MalCare Security <= 6.69 versions. | ||||
| CVE-2026-84779 | 2 Sheikh Heera, Wordpress | 2 Agentimus – Ai Seo, Llms.txt & Mcp For Ai Agents, Wordpress | 2026-09-04 | 8.1 High |
| Subscriber Broken Access Control in Agentimus – AI SEO, llms.txt & MCP for AI Agents <= 1.51.0 versions. | ||||
| CVE-2026-64394 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: add a WRITE_DAC/WRITE_OWNER check to SMB2 SET_INFO SECURITY commit cc57232cae23 ("ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE") added a fp->daccess gate to fsctl_set_sparse and noted that "similar handle-level checks exist in other functions but are missing here." The SMB2 SET_INFO SECURITY arm is one of the missing ones, and the most security-relevant: smb2_set_info_sec() calls set_info_sec() with no per-handle access check. set_info_sec() (fs/smb/server/smbacl.c) re-permissions the file: it rewrites owner/group/mode via notify_change(), rewrites the POSIX ACL via set_posix_acl(), and on KSMBD_SHARE_FLAG_ACL_XATTR shares removes and rewrites the Windows security descriptor via ksmbd_vfs_set_sd_xattr(). Every other persistent-mutation arm of the sibling handler smb2_set_info_file() checks fp->daccess first (FILE_WRITE_DATA / FILE_DELETE / FILE_WRITE_EA / FILE_WRITE_ATTRIBUTES); the SECURITY arm — which mutates the access control itself — is the only one with no gate. A client can therefore open a handle with FILE_WRITE_ATTRIBUTES only (no FILE_WRITE_DAC / FILE_WRITE_OWNER) and use SMB2_SET_INFO with InfoType SMB2_O_INFO_SECURITY to rewrite the file's DACL and owner, granting itself access the handle's daccess never carried. Unlike the FSCTL data arms this is a metadata/xattr operation, so there is no FMODE_WRITE VFS backstop — the missing fp->daccess check is the entire gate. Setting a security descriptor is the WRITE_DAC / WRITE_OWNER operation, so require at least one of those on the handle before re-permissioning the file. -EACCES is mapped to STATUS_ACCESS_DENIED by smb2_set_info(). | ||||
| CVE-2026-64407 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3() During the v3 firmware download the controller sends a v3_data_req with a 32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower bound of the offset and then sends firmware from that offset. nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction; serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data + nxpdev->fw_dnld_v3_offset, len); Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size, so a controller that asks for an offset or length past the firmware image makes the driver read past the end of nxpdev->fw->data and send that memory back over UART. nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent check to the v3 path, reject the request when it falls outside the firmware image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at free_skb stays consistent. | ||||
| CVE-2026-64414 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: handle unreadable frags sashiko reports: When an skb with unreadable fragments (such as from devmem TCP, where skb_frags_readable(skb) returns false) is processed by the u32 module, skb_copy_bits() will safely return a negative error code [..] xt_u32: bail out with hotdrop in this case. gather_frags: return -1, just as if we had no fragment header. nfnetlink_queue: restrict to the linear part. nfnetlink_log: restrict to the linear part. v2: - skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue is broken too xt_u32 shouldn't return true if hotdrop was set. | ||||
| CVE-2026-64418 | 1 Linux | 1 Linux Kernel | 2026-09-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix shrinker_info teardown race with expansion expand_shrinker_info() iterates all visible memcgs under shrinker_mutex, including memcgs that have not finished ->css_online() yet. Once pn->shrinker_info has been published, teardown must stay serialized with expand_shrinker_info() until that memcg is either fully online or no longer visible to iteration. Today alloc_shrinker_info() breaks that rule by dropping shrinker_mutex before freeing a partially initialized shrinker_info array, which may cause the following race: CPU0 CPU1 ==== ==== css_create --> list_add_tail_rcu(&css->sibling, &parent_css->children); online_css --> mem_cgroup_css_online --> alloc_shrinker_info --> alloc node0 info rcu_assign_pointer(C->node0->shrinker_info, old0) alloc node1 info -> FAIL -> goto err mutex_unlock(shrinker_mutex) shrinker_alloc() --> shrinker_memcg_alloc --> mutex_lock(shrinker_mutex) expand_shrinker_info --> mem_cgroup_iter see the memcg expand_one_shrinker_info --> old0 = C->node0->shrinker_info memcpy(new->unit, old0->unit, ...); free_shrinker_info --> kvfree(old0); /* double free !! */ kvfree_rcu(old0, rcu); The same problem exists later in mem_cgroup_css_online(). If alloc_shrinker_info() succeeds but a subsequent objcg allocation fails, the free_objcg -> free_shrinker_info() unwind path tears down the already published pn->shrinker_info arrays without shrinker_mutex. The expand_one_shrinker_info() can race with that teardown in the same way, leading to use-after-free or double-free of the old shrinker_info. Fix this by serializing shrinker_info teardown with shrinker_mutex, and by keeping alloc_shrinker_info() error cleanup inside the locked section. | ||||
| CVE-2026-84836 | 2 Kirillbdev, Wordpress | 2 Wc Ukraine Shipping, Wordpress | 2026-09-04 | 7.1 High |
| Subscriber Insecure Direct Object References (IDOR) in WC Ukraine Shipping <= 1.22.3 versions. | ||||
| CVE-2026-84848 | 2 Brightvesseldev, Wordpress | 2 Quick Event Manager, Wordpress | 2026-09-04 | 7.1 High |
| Unauthenticated Cross Site Scripting (XSS) in Quick Event Manager <= 9.17 versions. | ||||
| CVE-2026-85012 | 1 Aws | 2 @amazon-codecatalyst/blueprints.blueprint, Amazon-codecatalyst Blueprints.blueprint | 2026-09-04 | 8 High |
| Improper neutralization of special elements used in an OS command (CWE-78) in the blueprint resynthesis framework in Amazon Web Services codecatalyst-blueprints before 0.3.156 might allow a user with permission to commit to a repository in the project to execute arbitrary commands in the blueprint resynthesis environment via shell metacharacters in the owner field of a [local] merge strategy entry in a crafted .ownership-file. Version 0.3.156 removes shell interpretation of the owner field, running the command directly rather than through a shell, and rejects values outside an allowlisted command form. This eliminates shell metacharacter command injection. To remediate this issue, users should upgrade to version 0.3.156 or later. No action is required for use of the Amazon CodeCatalyst service. Resynthesis runs in an isolated per-project environment with scoped credentials, and the service applies server-side validation there that rejects [local] merge strategy commands outside a restricted allowlisted form, including for blueprint versions published before 0.3.156. | ||||
| CVE-2026-85396 | 2 Rubyzip, Rubyzip Project | 2 Rubyzip, Rubyzip | 2026-09-04 | 7.5 High |
| rubyzip versions before 3.4.0 contain a path traversal vulnerability in Zip::Entry#extract that fails to properly validate extraction paths using prefix comparison without trailing separators. Attackers can craft archive entries with names like ../upload_backup/owned.sh to write files outside the intended extraction directory into sibling paths sharing the destination prefix. | ||||
| CVE-2026-77465 | 1 Binarymuse | 1 Toml-node | 2026-09-04 | 7.5 High |
| toml-node is a TOML parser for Node.js and the browser. Prior to 4.2.0, toml.parse() uses a Peggy 5.1.0 generated recursive-descent parser in lib/parser.js whose peg$parsevalue, peg$parsearray, and peg$parseinline_table_entry functions recurse through nested arrays and inline tables without a depth limit. A remote unauthenticated application parsing an attacker-controlled TOML document containing a few thousand nested arrays or inline tables can exhaust the Node.js call stack, raise an unexpected RangeError rather than the parser's SyntaxError, and terminate an unprotected request worker or process. The corresponding grammar source is src/toml.pegjs, where the generated parser must be bounded. This issue is fixed in version 4.2.0. | ||||