Export limit exceeded: 102046 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (102046 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93813 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: tree-checker: validate INODE_REF's namelen [BUG] A crafted btrfs image can trigger the following crash: BUG: unable to handle page fault for address: ffffd1dc42884000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page CPU: 9 UID: 0 PID: 1034 Comm: poc Not tainted 7.1.0-rc4-custom+ #383 PREEMPT(full) 46af0a92938a63be7132e0dfd71e62327c51d5c2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:memcpy+0xc/0x10 Call Trace: <TASK> read_extent_buffer+0xe4/0x100 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f] btrfs_get_name+0x15e/0x1e0 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f] reconnect_path+0x165/0x390 exportfs_decode_fh_raw+0x337/0x400 ? drop_caches_sysctl_handler+0xb0/0xb0 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:memcpy+0xc/0x10 Kernel panic - not syncing: Fatal exception [CAUSE] TThe crafted image has the following corrupted INODE_REF item: item 9 key (258 INODE_REF 257) itemoff 11544 itemsize 4106 index 2 namelen 4096 name: d\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000 The itemsize matches the namelen, but the namelen is 4096, way larger than normal name length limit (BTRFS_NAME_LEN, 255). Meanwhile the memory of the @name is only 255 byte sized, this will cause out-of-boundary access, and cause the above crash. [FIX] Add extra namelen verification for INODE_REF, just like what we have done in ROOT_REF checks. Now the crafted image can be rejected gracefully: BTRFS critical (device dm-2): corrupt leaf: root=5 block=30572544 slot=14 ino=259, invalid inode ref name length, has 4096 expect [1, 255] BTRFS error (device dm-2): read time tree block corruption detected on logical 30572544 mirror 2 [ Rebase, add a Link: tag, add an simple cause analyze ] | ||||
| CVE-2026-93812 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr ndr_encode_v4_ntacl() allocates sd_ndr.data via kzalloc() at entry. If any subsequent ndr_write_*() call returns error during encoding, the allocated sd_ndr.data won't be freed and causes memory leak. Move kfree(sd_ndr.data) into out label to ensure the buffer gets released on all success and error return paths. | ||||
| CVE-2026-93810 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix double fput Fix a double fput() in error handling in cachefiles_create_tmpfile(). | ||||
| CVE-2026-93806 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate assoc response length before status and IE access cfg80211_rx_assoc_resp() initialises the status and response-IE fields of cfg80211_connect_resp_params from the management frame before proving that the frame is long enough for those offsets. S1G and regular association responses also have different IE offsets, but the S1G path only patched resp_ie after the unsafe initialiser had already run. Defer resp_ie, resp_ie_len, and status to after the link-iteration loop. Use a bool to remember whether the frame is S1G, then validate the appropriate minimum length and set all three fields in a single if/else block. Funnel short-frame and SME-reject cleanup through a shared free_bss label for the abandon paths. | ||||
| CVE-2026-93800 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free on reloc root after error in insert_dirty_subvol() If during relocation we fail in insert_dirty_subvol() because btrfs_update_reloc_root() returned an error, we will leave a root's reloc_root field pointing to a reloc root that was freed instead of NULL, resulting later in a use-after-free, or double free attempt during unmount. The sequence of steps is this: 1) During relocation the call to btrfs_update_reloc_root() in insert_dirty_subvol() fails, so insert_dirty_subvol() returns the error to merge_reloc_root() without adding the root to the list rc->dirty_subvol_roots; 2) Then merge_reloc_root() aborts the current transaction because insert_dirty_subvol() returned an error; 3) Up the call chain, merge_reloc_roots() gets the error, adds the reloc root for root X to the local reloc_roots list and jumps to the 'out' label, where it calls free_reloc_roots() to free all the reloc roots in the local reloc_roots list. This frees the reloc root for root X; 4) We go up the call chain to relocate_block_group() which calls clean_dirty_subvols() to go over dirty roots and set their ->reloc_root field to NULL, but root X is not in the dirty_subvol_roots list, so its ->reloc_root still points to a reloc root; 5) Relocation finishes, with an error and a transaction abort, but the ->reloc_root field for root X still points to the reloc root that was freed in step 3; 6) When unmounting the fs we end up calling: btrfs_free_fs_roots() btrfs_drop_and_free_fs_root() --> calls btrfs_put_root() against root X's ->reloc_root which is not NULL and points to the already freed reloc root in step 4 above Resulting in a use-after-free to a double free attempt. Syzbot reported this with the following dmesg/syslog: [ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5) [ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure [ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5 [ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction. [ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0 [ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure [ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly [ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure [ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1 [ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30 [ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30 [ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409 [ 106.682946][ T5338] ================================================================== [ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250 [ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338 [ 106.693173][ T5338] [ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) [ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 106.694300][ T5338] Call Trace: [ 106.694308][ T5338] <TASK> [ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150 [ 106.694331][ T5338] print_address_description+0x55/0x1e0 [ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250 [ 106.694358][ T5338] print_report+0x58/0x70 [ 106. ---truncated--- | ||||
| CVE-2026-93799 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: validate sta_id in BA window status notif BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the firmware notification and uses it to index fw_id_to_mac_id[] without bounds checking. Validate sta_id before array access to prevent out-of-bounds indexing. | ||||
| CVE-2026-93798 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix reloc root cleanup in merge_reloc_roots() If the root we got has zero root refs in its root item, we are resetting the root's ->reloc_root without using barriers like we do everywhere else. Sashiko complained about this while reviewing another patch, and it's correct (see the Link tag below). Also, we should not clear BTRFS_ROOT_DEAD_RELOC_TREE from the root unless the root points to the reloc root we have. Fix this by using clear_reloc_root(), which issues the memory barrier after setting the root's ->reloc_root to NULL and before clearing the bit BTRFS_ROOT_DEAD_RELOC_TREE from the root. | ||||
| CVE-2026-93790 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix out-of-bounds tid_data access in BA notif mvmsta->tid_data was indexed by the TFD loop counter 'i' instead of the actual TID value 'tid'. This writes lq_color into a random tid_data slot unrelated to the BA entry. Since multi-TID blockack is not really in use, 'i' was always 0 and no harm was done. Add a out-of-bound check before accessing the array. | ||||
| CVE-2026-93787 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: bound dirent name against end of SMB response in cifs_filldir cifs_filldir() copies the entry name out of an SMB1 TRANS2_FIND_FIRST / FIND_NEXT response using a length (de.namelen) supplied by the server. The kmalloc'd SMB response buffer is bounded, but nothing checks that de.name + de.namelen still lies inside that buffer before the eventual filldir64() -> verify_dirent_name() -> memchr() reads namelen bytes. A hostile SMB1 server that returns an oversized FileNameLength in a directory entry therefore causes memchr() to read past the end of the response slab buffer. Reachable from any user who can list a directory on a CIFS mount served by an attacker-controlled server (getdents64() on the mounted directory): BUG: KASAN: slab-out-of-bounds in memchr+0x71/0x80 Read of size 1 at addr ffff88800e0640cc by task poc/115 Call Trace: dump_stack_lvl+0x64/0x80 print_report+0xce/0x620 kasan_report+0xec/0x120 memchr+0x71/0x80 filldir64+0x4c/0x6a0 cifs_filldir.constprop.0+0x9bb/0x1e00 cifs_readdir+0x2101/0x3380 iterate_dir+0x19c/0x520 __x64_sys_getdents64+0x126/0x210 do_syscall_64+0x107/0x5a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Pass the end-of-response pointer down to cifs_filldir() and reject entries whose name would extend past that boundary. This bug was discovered by Artiphishell's vTriage pipeline, which generated a userspace reproducer (an emulated hostile SMB1 server plus a getdents64() client) that reliably triggers the KASAN report on an unpatched kernel. The fix below was drafted with the Claude coding assistant; a userspace reproducer is available on request. | ||||
| CVE-2026-93786 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: preserve VFS inherited POSIX ACL mask The VFS initializes a child's POSIX ACL from the parent's default ACL and the requested creation mode. Do not mutate the parent ACL or overwrite the child's VFS-computed access and default ACLs afterwards. This preserves restrictive ACL_MASK entries and prevents SMB object creation from widening effective permissions. | ||||
| CVE-2026-93782 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: flush backend after device ioctls vhost-scsi translates guest response descriptors into userspace iovecs when commands are submitted. Target-core completes those commands asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while an in-flight command still retains response iovecs translated through the old table. If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command completion can write the response to an unrelated userspace object. Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device ioctl. This waits for in-flight commands that can still use the old response iovecs before the ioctl returns. | ||||
| CVE-2026-93288 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which clears the logger pointer without an RCU grace period. Immediately after, ops_free_list() frees the per-net state while concurrent packets might still be executing nf_log_packet() under rcu_read_lock()." Clear the pointer via .pre_exit to make sure rcu readers have completed before pernet storage is free'd. The change in nf_log_syslog.c is only done for consistency: it doesn't use pernet data. | ||||
| CVE-2026-93287 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: smbus: reject oversized block transfers in the common path The SMBus block transfer length data->block[0] is validated in i2c_smbus_xfer_emulated() but that check runs too late for tracepoints and is skipped entirely when the adapter provides a native smbus_xfer implementation. This allows user-controlled oversized block lengths to reach tracepoint memcpy calls and driver callbacks unchecked. Add an early validation in __i2c_smbus_xfer() that rejects block transfers whose caller-supplied length is zero or exceeds I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driver callback runs. data->block[0] is filled in by the device on SMBus block reads, so the check is scoped to operations where the length is actually supplied by the caller. This is consistent with the existing -EINVAL convention in the emulated path and protects all downstream consumers at once: the smbus_write tracepoint, all native smbus_xfer driver implementations, and the emulated path. Two distinct bugs are fixed by this change: Bug 1: smbus_write tracepoint OOB (include/trace/events/smbus.h) trace_smbus_write() fires before any validation and copies data->block[0]+1 bytes into a 34-byte event buffer. With block[0]=0xfe the tracepoint copies 255 bytes, overflowing by 221. BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_smbus_write+0x27c/0x530 Read of size 255 at addr ffff88800d98fcf8 by task poc_smbus/91 Call Trace: <TASK> __asan_memcpy+0x23/0x80 trace_event_raw_event_smbus_write+0x27c/0x530 __i2c_smbus_xfer+0x43a/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Bug 2: i2c-stub I2C_SMBUS_I2C_BLOCK_DATA OOB (drivers/i2c/i2c-stub.c) stub_xfer() implements .smbus_xfer directly and only clamps block[0] against 256-command, not I2C_SMBUS_BLOCK_MAX. With block[0]=0xff and command=0 the loop accesses block[1+i] for i up to 254, far past the 34-byte union. UBSAN: array-index-out-of-bounds in drivers/i2c/i2c-stub.c:223:44 index 34 is out of range for type '__u8 [34]' Call Trace: <TASK> __ubsan_handle_out_of_bounds+0xd7/0x120 stub_xfer+0x1971/0x198f [i2c_stub] __i2c_smbus_xfer+0x306/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Both traces reproduced on v7.0-rc6+i2c/for-current with KASAN+UBSAN. | ||||
| CVE-2026-93284 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: dma-unmap pages before handling migration errors drm_pagemap_migrate_unmap_pages() relies on the pages array to determine which pages require DMA unmapping. However, drm_pagemap_migration_unlock_put_pages() clears the array as part of its cleanup, leaving drm_pagemap_migrate_unmap_pages() with no valid page information if it is called afterward. Call drm_pagemap_migrate_unmap_pages() before drm_pagemap_migration_unlock_put_pages() so the pages array remains valid during DMA unmapping. | ||||
| CVE-2026-93196 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm: virtio_pmem: refcount requests for token lifetime KASAN reports slab-use-after-free in __wake_up_common(): BUG: KASAN: slab-use-after-free in __wake_up_common+0x114/0x160 Read of size 8 at addr ffff88810fdcb710 by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.19.0-next-20260220-00006-g1eae5f204ec3 #4 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x6d/0xb0 print_report+0x170/0x4e2 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __virt_addr_valid+0x1dc/0x380 kasan_report+0xbc/0xf0 ? __wake_up_common+0x114/0x160 ? __wake_up_common+0x114/0x160 __wake_up_common+0x114/0x160 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 __wake_up+0x36/0x60 virtio_pmem_host_ack+0x11d/0x3b0 ? sched_balance_domains+0x29f/0xb00 ? __pfx_virtio_pmem_host_ack+0x10/0x10 ? _raw_spin_lock_irqsave+0x98/0x100 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 vring_interrupt+0x1c9/0x5e0 ? __pfx_vp_interrupt+0x10/0x10 vp_vring_interrupt+0x87/0x100 ? __pfx_vp_interrupt+0x10/0x10 __handle_irq_event_percpu+0x17f/0x550 ? __pfx__raw_spin_lock+0x10/0x10 handle_irq_event+0xab/0x1c0 handle_fasteoi_irq+0x276/0xae0 __common_interrupt+0x65/0x130 common_interrupt+0x78/0xa0 </IRQ> virtio_pmem_host_ack() wakes a request that has already been freed by the submitter. This happens when the request token is still reachable via the virtqueue, but virtio_pmem_flush() returns and frees it. Fix the token lifetime by refcounting struct virtio_pmem_request. virtio_pmem_flush() holds a submitter reference, and the virtqueue holds an extra reference once the request is queued. The completion path drops the virtqueue reference, and the submitter drops its reference before returning. | ||||
| CVE-2026-90030 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations. | ||||
| CVE-2026-90016 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie() rtw_restruct_wmm_ie() scans in_ie for a WMM IE with: while (i < in_len) { ... if (i + 5 < in_len && in_ie[i] == 0xDD && ...) { ... break; } i += (in_ie[i + 1] + 2); /* to the next IE element */ } When the "i + 5 < in_len" match check fails simply because i is within 5 bytes of the end of the buffer (i.e. no WMM IE was found near the tail of in_ie), execution falls through to "i += (in_ie[i + 1] + 2)", which reads in_ie[i + 1]. If i == in_len - 1 at that point, this is a 1-byte out-of-bounds read of an attacker-influenced IE buffer built from association/scan data. Commit a75281626fc8f ("staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie") added the "i + 5 < in_len" guard to the match condition itself, but did not add an equivalent guard before the fallthrough advance, so the same class of OOB read remained reachable through the non-matching path. Add an explicit bounds check before advancing to the next IE. | ||||
| CVE-2026-90013 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening options file The options files do not take the trace_array reference for the options they represent. This could cause a use-after-free kernel crash if one of these files is opened by one task and another task removes the instance that the option is for. Because it doesn't take a reference upon opening, it will not stop the removal which will free the options descriptor that is being used. As the options are somewhat dynamic in their creation at boot up, each file represents a flag in the trace_array. The trace_array has an array of indexes to represent each of these flags that is stored in the trace_flags_index array. The address of the index array element is used to pass to the inode->i_private pointer. Then that element is read which holds the index (which represents the flag) and then the index is used to calculate the trace_array descriptor from its trace_flags_index array. One issue is that the index element can not be referenced until the trace_array's reference is taken. To handle this, create a new helper function called: trace_array_options_get() that will iterate all the existing trace_arrays in the ftrace_trace_arrays list (under the trace_types_lock), and compare the passed in address of the index element with the entire array of the trace_array's trace_flags_index array. If it matches, then up the corresponding trace_array's reference and return. | ||||
| CVE-2026-90002 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Take trace_array reference before accessing its ftrace_ops The trace instance files set_ftrace_filter and set_ftrace_notrace was updated to work with specific trace instances (trace_arrays). The issue is that when these files are opened, there is a small race window where it will use the ftrace_ops from the inode->private pointer to get a reference to the trace_array and then take its reference. The problem is that the ftrace_ops itself could be freed. If the rmdir on the instance happens at the same time the set_ftrace_filter file is opened, the rmdir could have also freed the ftrace_ops and referencing it will cause a use-after-free bug and crash the kernel. Instead, pass in the trace_array as the file private data (NULL for the top level instance), and then pass both the trace_array and the ftrace_ops to the ftrace_regex_open() function. If the trace_array is NULL, then it just uses the ftrace_ops without the need to take its reference (like normal). If the ftrace_ops is NULL, that is only the case for the top level instance and the global_ops can be used. This allows the trace_array to have its reference incremented before touching the ftrace_ops that could also be freed when the instance is. | ||||
| CVE-2026-89971 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme: skip the zoned limits update if the zone info query failed nvme_query_zone_info() returns either a negative errno or a positive NVMe status code, but nvme_update_ns_info_block() only tests for the negative case: ret = nvme_query_zone_info(ns, lbaf, &zi); if (ret < 0) goto out; If the device fails the Identify Namespace (I/O Command Set specific) command, or the Identify Controller command issued by nvme_set_max_append(), the positive status falls through and setup continues with the zero-initialized zone info. nvme_update_zone_info() then marks the queue zoned with chunk_sectors and ns->head->zsze set to zero. blk_validate_zoned_limits() does not check chunk_sectors, so the limits commit succeeds. blk_revalidate_disk_zones() does reject the zero zone size, but by then the limits are live and nothing rolls them back, so I/O keeps being submitted to a zoned queue with a zero zone size and disk_zone_no() shifts by ilog2(0): nvme0n1: Invalid non power of two zone size (0) UBSAN: shift-out-of-bounds in include/linux/blkdev.h:747:16 shift exponent -1 is negative disk_zone_no include/linux/blkdev.h:747 [inline] bio_straddles_zones include/linux/blkdev.h:1058 [inline] blk_zone_wplug_handle_write block/blk-zoned.c:1423 [inline] blk_zone_plug_bio.cold+0x25/0x1c8 block/blk-zoned.c:1605 blk_mq_submit_bio+0x18fb/0x2870 block/blk-mq.c:3196 submit_bh_wbc+0x575/0x740 fs/buffer.c:2824 __block_write_full_folio+0x728/0xdd0 fs/buffer.c:1933 Any device, firmware or NVMe-oF target that fails this one command reaches this. Skip the zoned limits update in that case, and log which of the two things happened: during a revalidation the queue keeps the zone geometry it was last validated with, and on a first scan the namespace is registered without zoned limits, so that it is still available as a handle for admin commands. Neither of the paths in nvme_query_zone_info() that return a positive status logs anything, so the failure would otherwise be silent. zi.zone_size is an exact indicator: every path that returns a positive status returns before it is assigned, and after that the only failure left is -ENODEV, which the caller already handles. Found by FuzzNvme. | ||||