| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: Avoid iteration of dying tasks with zero refcount
The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from
cgroup_task_release() to cgroup_task_free()") extended the lifetime of
tasks on the dying_tasks list.
The iterators have provision to go through dying_tasks because of
dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however,
it was expected that such tasks can obtain a new reference (that is
possible before cgroup_task_release()/put_task_struct_rcu_user()).
The tasks after cgroup_task_release() and before cgroup_task_free()
are subject to race when they may or may not have ->usage count > 0.
The race window is between css_task_iter_next() invocations
when css_set_lock is released and we may arrive at a new ->task_pos.
The iterator should not attempt to resurrect tasks whose ->usage count
dropped to zero. (When that happens, __put_task_struct_rcu_cb() is
already imminent and the returned task_struct would could be used
after free.)
As for the fix, we cannot simply check the signal->live count of a task
on the dying list because that won't distinguish regular zombies waiting
to be reaped from RCU remnant tasks that are going to be free'd.
Therefore add an extra check to rule out ->usage==0 tasks from any
iteration.
The repeat: loop in css_task_iter_advance() doesn't consider ->usage
count, so add a new loop to css_task_iter_next() to skip de-used tasks
on the dying_list.
Rough illustration of the possible race
R (reader of cgroup.procs) T (thread) L (group leader)
--------------------------------- -------------------------------- --------------------------------
L exits, signal->live > 0
cgroup_task_dead(L)
css_set_skip_task_iters() // skips only cset->tasks
list_add_tail(&L->cg_list, &cset->dying_tasks)
css_task_iter_next()
take css_set_lock
css_task_iter_advance()
leader && signal->live != 0
=> it->task_pos = &L->cg_list
release css_set_lock
T exits
--signal->live == 0
cgroup_task_dead(T) // css_set_lock
release_task(T)
cgroup_task_release(T)
release_task(L) // zap_leader
cgroup_task_release(L)
put_task_struct_rcu_user(L)
...RCU...
put_task_struct(L)
L->usage = 0
/* L still on dying_tasks */
...RCU...
__put_task_struct(L)
css_task_iter_next() // another iteration
take css_set_lock
it->task_pos = &L->cg_list
get_task_struct(L)
=> addition on 0
drop css_set_lock
cgroup_task_free(L)
css_set_skip_task_iters() // dying skip comes too late
free_task(L)
cgroup_procs_show()
task_pid_vnr(L) |
| Wasmtime is a runtime for WebAssembly. From 46.0.0 until 46.0.2 and 47.0.3, fuel and epoch preemption checks inside bulk operations including memory.copy, table.grow, and array.copy can expose invalid intermediate state when an embedder mutates a Store in Store::epoch_deadline_callback or continues using a Store after cancellation or a trap. A cancelled non-nullable table growth can leave null elements, linear-memory growth during memory.copy can invalidate retained raw pointers, and callback-triggered garbage collection during array.copy can invalidate GC pointers, resulting in a crash, invalid memory access, or GC heap corruption. Embeddings whose callbacks only access the host data in Store<T>, and embeddings that discard a Store after timeout or epoch deadline, are not affected. This issue is fixed in versions 46.0.2 and 47.0.3. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix race between sctp_wait_for_connect and peeloff
sctp_wait_for_connect() drops and re-acquires the socket lock while
waiting for the association to reach ESTABLISHED state. During this
window, another thread can peeloff the association to a new socket via
getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After
re-acquiring the old socket lock, sctp_wait_for_connect() returns
success without noticing the migration — the caller then accesses
the association under the wrong lock in sctp_datamsg_from_user().
Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf()
already has, returning an error if the association was migrated while
we slept. |
| Race condition in Transactions Platform in Google Chrome prior to 154.0.8037.57 allowed a remote attacker to potentially leak sensitive information via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix race condition during device registration
In hci_register_dev(), the power_on work item is queued to
hdev->req_workqueue before initializing hdev->adv_monitors_idr and
registering the MSFT extension via msft_register(). For devices marked with
quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on
the device. When the power_on work item runs concurrently on another CPU,
hci_power_on() detects that the device is unconfigured and immediately
invokes hci_dev_do_close(), which calls msft_do_close().
Concurrently, msft_register() allocates the msft structure and exposes it
to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If
msft_do_close() executes while hdev->msft_data is already assigned but the
mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates
on an uninitialized mutex, triggering a DEBUG_LOCKS warning:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common
kernel/locking/mutex.c:625 [inline]
WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550
kernel/locking/mutex.c:821
...
Call Trace:
<TASK>
msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693
hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522
hci_dev_do_close net/bluetooth/hci_core.c:499 [inline]
hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937
process_one_work kernel/workqueue.c:3322 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405
worker_thread+0x92d/0xe10 kernel/workqueue.c:3486
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fix this by moving the queue_work() call in hci_register_dev() to after
idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device
structures and extensions are fully initialized before asynchronous tasks
can access them. Additionally, assign hdev->msft_data in msft_register()
only after mutex_init(&msft->filter_lock) has completed. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: safely drain sessions during logoff
SMB3 multichannel allows requests for one session to run on multiple
connections. Wait for all channels bound to a session before freeing
shared session objects.
A deferred byte-range lock remains counted as a running request and only
wakes when its file closes. Wake blocked locks during the drain without
unpublishing or modifying their file objects. Synchronous CANCEL requests
must invoke their cancellation callback to wake pending operations, while
CHANGE_NOTIFY completion remains specific to the asynchronous path.
Serialize session teardown with channel registration and previous-session
cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and
connection teardown invoke cancellation callbacks only once. |
| Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in WPdevelop Booking Calendar booking allows Leveraging Race Conditions.This issue affects Booking Calendar: from n/a through 11.8.4. |
| Podgrab contains an unauthenticated denial-of-service vulnerability caused by unsynchronized concurrent access to shared maps (activePlayers and allConnections) in its WebSocket handler, where Wshandler and HandleWebsocketMessages goroutines read and write these maps without a mutex. A remote attacker can open multiple WebSocket connections to the /ws endpoint and send messages in a loop to trigger a Go runtime data race that crashes the process, causing a denial of service that requires operator intervention to restore service. |
| MISP contains a vulnerability in its one-time password (OTP) authentication flow that allows replay of a consumed HOTP (paper) token and rewinding of the token counter.
The HOTP verification logic compared the submitted token against a counter value that was cached in the user's session at the time the password was entered, rather than against the authoritative counter stored in the database. Because the session-cached counter is not updated after a token is successfully consumed, an attacker who holds a valid session (password already submitted) can reuse a previously burned HOTP token. The stale cached counter still matches the replayed token, granting a second successful authentication and effectively rewinding the counter state.
Preconditions:
- The target user has HOTP (paper token) second-factor authentication enabled.
- The attacker possesses a valid session in which the password step has already been completed (the OTP step is pending).
- The attacker has access to at least one HOTP token value (e.g., a paper token list).
Security impact:
- Bypass of the second authentication factor, allowing unauthorized access to a user's MISP account.
- Corruption of the HOTP counter state, potentially invalidating subsequent legitimate tokens or enabling further replays.
Affected versions: <2.5.48. |
| Ghost versions 0.5.0 before 6.23.0 contain a concurrency issue in the staff invitation acceptance mechanism that allows multiple accounts to be created from a single invite token. Attackers can exploit this race condition by submitting concurrent requests with the same invitation token to create duplicate user accounts. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where a privileged user could trigger a race condition that leads to an out-of-bounds write. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| Race condition, use-after-free in the Audio/Video component. This vulnerability was fixed in Thunderbird 157 and Firefox 157. |
| Race condition in V8 in Google Chrome prior to 154.0.8037.57 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Affected products do not properly synchronize access to their monitoring functionality. When multiple clients send concurrent requests, this may lead to incorrect reads or writes, or to corruption of internal memory structures. An authenticated remote attacker with monitoring access can exploit this issue to cause incorrect data processing or a denial-of-service condition. |
| A race condition in the document value layer of MongoDB Server can allow concurrent server threads to operate on the same internal memory without synchronization, leading to memory corruption. An authenticated user holding ordinary read-write privileges on a database may be able to trigger this condition over the normal client protocol, resulting in server termination and potential corruption of process memory with user-influenced content. Successful use of this issue may impact the confidentiality, integrity, and availability of the affected server process. |
| The account recovery (password reset) functionality in the vulnerability-lookup web application contains a time-of-check-to-time-of-use (TOCTOU) race condition in the consumption of single-use recovery tokens. The original implementation verified the token nonce against the stored digest and then consumed (cleared) it in separate database operations. Two concurrent HTTP requests presenting the same valid recovery token could both pass the verification check before either transaction committed, allowing both to set their own password on the target account. The last transaction to commit overwrites the first, enabling an attacker who possesses a valid recovery token to replace the legitimate user's password with one of their choosing.
A secondary defect in the same endpoint (confirm_account) allowed a valid recovery link to be used to set an empty or trivially short password (e.g., three characters). The view handler performed only a manual equality comparison between the two password fields and never invoked the form's validation logic, bypassing the intended minimum-length and complexity constraints.
The affected component is the user account recovery endpoint (/user/confirm_account/<token>) and the associated token verification and consumption logic in the User model (website/models/user.py) and the view layer (website/web/views/user.py). |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Management Instrumentation allows an authorized attacker to elevate privileges locally. |
| OpenClaw (npm package `openclaw`) versions >= 2026.7.2 and < 2026.9.2 contain a race condition in the Discord realtime voice transcript path. Concurrent control-classified voice transcripts could consume speaker context belonging to another participant after an asynchronous control check, causing a transcript to inherit another speaker's owner status. In Discord agent-proxy voice sessions using the affected realtime control path, an utterance from a non-owner participant could reach the downstream agent boundary marked as owner, so owner-sensitive behavior is applied to the wrong speaker. Exploitation depends on concurrent transcript timing and on the tools and commands available to the affected agent. The issue is fixed in 2026.9.2; as a workaround, disable Discord realtime voice for agents that distinguish owner and non-owner senders. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.6 before 19.2.7, 19.3 before 19.3.3, and 19.4 before 19.4.1 that under a race condition, the MCP search tool's shared state handling could have caused search results to be returned under an incorrect user context. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: perf: Retrieve path and source from event data
ETM perf callbacks currently use the per-CPU csdev_src pointer, which
can race with updates during device registration and unregistration.
The AUX setup already builds and stores the path in the event data.
Use this path to retrieve the source instead of csdev_src to avoid
the race.
Export coresight_get_source() and add etm_event_get_ctxt_path() to
retrieve the context's path and its source with READ_ONCE() /
WRITE_ONCE() accessors. Give the comments to explain why this
approach is safe when pause or resume callbacks preempt the disable
callback (e.g. via NMI). |
