Export limit exceeded: 25003 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25003 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98016 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free race in sample_restore_put() Concurrent teardown of TC sample rules sharing the same restore context may re-read restore->count after dropping restore_lock. At that point another thread may already have completed cleanup and freed the restore object. Use the result of the refcount decrement while holding restore_lock to determine whether cleanup is needed. | ||||
| CVE-2026-98029 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: eth: nfp: bound the ntuple rule dump by the caller's buffer size nfp_net_get_fs_loc() dumps every entry of nn->fs.list into rule_locs[] without consulting cmd->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed flow steering rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it. Bail out with -EMSGSIZE when the buffer fills up, the way the other ntuple capable drivers do, and report how many locations were filled so a shrinking rule list does not leave the caller reading stale slots. | ||||
| CVE-2026-98037 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject untrusted allocated-object pointers When the final RCU read-side critical section ends, a local kptr is demoted to PTR_UNTRUSTED but retains MEM_ALLOC. The pointer may be NULL or may refer to an object whose lifetime is no longer protected. type_is_ptr_alloc_obj() nevertheless recognizes any PTR_TO_BTF_ID with MEM_ALLOC as a live allocated object. In particular, a refcount-only local kptr never carries NON_OWN_REF, so it still passes the bpf_refcount_acquire() argument check after RCU protection ends. The kfunc can then dereference NULL or stale memory. Make type_is_ptr_alloc_obj() reject PTR_UNTRUSTED pointers. Since type_is_non_owning_ref() is based on the same predicate, graph kfunc arguments obey the same live-object requirement. Fault-protected reads of the demoted pointer remain valid: writes are already rejected, and read fixups use bpf_may_fault_on_deref() rather than this predicate. [ kkd: Rewrote commit log ] | ||||
| CVE-2026-98039 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Require MEM_PERCPU for percpu kptr stores map_kptr_match_type() treats perm_flags as the set of register type flags that a kptr field permits. Adding MEM_PERCPU to that set for BPF_KPTR_PERCPU does not require the source register to carry it, however. The subset test consequently accepts both a plain bpf_obj_new() allocation and a referenced kernel pointer into a __percpu_kptr map field. Loads from the field are always marked MEM_PERCPU. Consumers then treat the stored value as the cookie returned by bpf_percpu_obj_new(): per-CPU pointer helpers relocate it, and map teardown selects the per-CPU free path. A plain allocation can therefore provide an arbitrary kernel read/write, while a kernel pointer can be relocated into an invalid address or sent through a missing destructor. Require the source MEM_PERCPU flag to match the destination field kind. This preserves valid bpf_percpu_obj_new() stores and rejects both the program-BTF and kernel-BTF variants. | ||||
| CVE-2026-98040 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark the zero register precise for a register-form NULL check check_cond_jmp_op() accepts "if rA <op> rB" as a NULL check for a nullable pointer rA when rB is a scalar known to be zero, lifts PTR_MAYBE_NULL from rA in the corresponding branch and does not mark rB precise. Consider the following program: r0 = bpf_get_prandom_u32(); r6 = 1; /* the r6 == 0 path is explored first */ if (r0 == 0) goto 1f; r6 = 0; 1: r0 = bpf_map_lookup_elem(map, &0); /* absent, NULL at runtime */ if (r0 == r6) goto 2f; /* taken as a NULL check for r0 */ *(u8 *)(r0 + 0); /* verifier: map value; runtime: zero */ 2: return 0; The r6 == 0 path is explored first and the dereference is accepted. The r6 == 1 path is pruned at the checkpoint recorded for (1), so the comparison is never verified with a non-zero r6. At runtime a failed lookup returns NULL, NULL != 1 takes the non-NULL edge and the program dereferences a pointer that is zero. | ||||
| CVE-2026-98042 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't resurrect a scalar id dropped by collect_linked_regs() check_cond_jmp_op() copies the compared registers into env->{false,true}_reg{1,2} before collect_linked_regs() runs and copies those snapshots back into both branch states afterwards. collect_linked_regs() records at most LINKED_REGS_MAX members of a linked registers group in the jump history and calls clear_scalar_id() for every member that does not fit. The compared register is not exempt from that. As a consequence, sync_linked_regs() might adjust ranges for more registers than bpf_bt_sync_linked_regs() can propagate precision to. Collect the linked registers before the snapshots are taken instead. This might lead to some unnecessary clear_scalar_id's, but from previous testing situations with many linked registers are extremely rare. | ||||
| CVE-2026-98043 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't infer non-NULL from a pointer with an unbounded offset reg_not_null() decides that a register holds a non-NULL value by looking at its type alone. For pointer types that allow arithmetic the type only guarantees a non-NULL base, in case of an unbound offset the runtime offset value might still add up to NULL. Consider the followng program: r6 = bpf_map_lookup_elem(map, &0); /* present */ if (r6 == 0) return 0; r7 = bpf_map_lookup_elem(map, &1); /* absent, NULL at runtime */ r8 = r7; r8 -= r6; /* pointer - pointer: unknown scalar, -r6 */ r8 <<= 1; r8 >>= 1; /* any non-negative offset is accepted by */ /* check_reg_sane_offset_ptr() */ r6 += r8; /* verifier: map value; runtime: zero */ if (r7 != r6) return 0; *(u8 *)(r7 + 0); /* r7 is inferred non-NULL, both are zero */ At runtime both registers are zero, the comparison is true and the load faults with NULL pointer dereference. Require the offset to be within +-BPF_MAX_VAR_OFF in reg_not_null(). | ||||
| CVE-2026-98058 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark syscall helpers as sleepable bpf_sys_bpf() executes the bpf(2) syscall body, which can take mutexes, allocate with GFP_KERNEL, and wait for an RCU grace period. bpf_sys_close() reaches close_fd() and filp_close(), which can sleep as well. Both helpers are limited to BPF_PROG_TYPE_SYSCALL, whose main program is sleepable. That does not make every callback sleepable: a syscall program can register a bpf_timer callback, and the verifier checks that callback in a non-sleepable context while retaining the syscall helper set. Without .might_sleep on the prototypes, such a callback can invoke bpf_sys_bpf() from hrtimer softirq context and trigger a scheduling-while-atomic failure. bpf_sys_close() is exposed through the same missing context check. Set .might_sleep on both prototypes so the existing helper-context check rejects them from timer callbacks and other atomic regions. Calls from the sleepable main body remain valid. | ||||
| CVE-2026-98070 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks() rds_tcp_reset_callbacks() quiesces the transmit path by setting the path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to be sampled clear before swapping the underlying socket and calling rds_send_path_reset(). Sampling the bit clear is not the same as owning it: rds_send_xmit() can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its state recheck after taking the lock is a store-buffering pattern (the resetter writes the state and reads the bit, the sender writes the bit and reads the state) and acquire_in_xmit() is only an acquire operation, so on weakly ordered architectures both sides can miss each other's write and the transmit path then runs concurrently with rds_send_path_reset() rewriting cp_xmit_* state - which is exactly what the comment above rds_send_path_reset() tells its callers to prevent. Take the lock instead, hold it across the socket swap and rds_send_path_reset(), and release it with a wake-up at the end. The lock-ordering constraint documented above the wait still holds: the lock is acquired before lock_sock(), so a sender inside tcp_sendmsg() can never be waited on while we hold the socket lock. Two details of the old code go away with the same change: - t_sock is now read only after the lock is acquired. The old code cached it before waiting; the teardown in rds_conn_shutdown() releases that socket and clears t_sock, so a pointer cached before the wait can be stale by the time the accept path resumes. Reading it under RDS_IN_XMIT is what makes the exclusion complete once the teardown owns the same lock, which the next patch arranges; until then the teardown still only samples the bit, and the two paths remain as exposed to each other as they are today. - The old !osock early path called rds_send_path_reset() with no serialization at all. It now runs under the lock like the normal path. The conditional RDS_CONN_RESETTING transition of the previous patch happens before the socket check either way: a path found without a socket is either still connecting (its reconnect worker blocked on t_conn_path_lock) and legitimately goes RESETTING -> UP on the new socket, or it has been torn down meanwhile and is dropped. The in-function comment describing the old wait-based quiesce is rewritten to describe the lock-based one, and the stale block comment above the function (which still described a return value and an incomplete list of t_sock writers) is refreshed to name all four writers - the connect, accept, teardown and swap paths - and what serializes each of them. | ||||
| CVE-2026-98072 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in release_in_xmit() release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then checks waitqueue_active() to decide whether anyone needs waking. clear_bit_unlock() is only a release operation: it orders the critical section before the bit clear, but does not order the subsequent plain load of the wait queue head after it. The waiter side does the mirror image - it adds itself to the wait queue and then tests the bit. That is the classic store-buffering pattern: the releasing CPU can read the wait queue as empty while the waiting CPU still reads the bit as set, so the sleeper is never woken. The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(), both in uninterruptible wait_event() with no timeout. A lost wake-up strands the shutdown worker on its single-threaded workqueue until some other sender releases the bit again - and on a connection that is being torn down precisely because it failed, there may never be another sender. The barrier used to be there: release_in_xmit() did clear_bit() followed by smp_mb__after_atomic() until commit 1422f28826d2 ("rds: introduce acquire/release ordering in acquire/release_in_xmit()") folded both into clear_bit_unlock(), which strengthened the lock hand-off but silently dropped the full barrier the wake-up check depends on. The refill counterpart, release_refill() in net/rds/ib_recv.c, still carries its smp_mb__after_atomic() for exactly this reason. Use wq_has_sleeper(), which is waitqueue_active() preceded by the required full barrier. | ||||
| CVE-2026-98073 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: Remove conflicting altnames for dying netns in __dev_change_net_namespace(). syzbot reported the warning in cfg80211_pernet_exit(). [0] The repro does the following: 1. create two device in root netns and non-root netns 2. assign the same altname for the two devices 3. remove the non-root netns Since commit 7663d522099e ("net: check for altname conflicts when changing netdev's netns"), cfg80211_switch_netns() and cfg802154_switch_netns() fail if init_net has a device with the conflicting altname. default_device_exit_net() had the same issue and commit d09486a04f5d ("net: fix removing a namespace with conflicting altnames") fixed it. cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix. Let's generalise the fix by removing conflicting altnames for dying netns in __dev_change_net_namespace(). [0]: cfg80211_switch_netns(rdev, &init_net) WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160 Modules linked in: CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026 Workqueue: netns cleanup_net RIP: 0010:cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871 Code: e8 03 42 80 3c 20 00 74 08 4c 89 f7 e8 b4 ef 0e f7 4d 8b 36 49 81 fe 20 10 4a 90 74 12 e8 03 3d 9f f6 eb 85 e8 fc 3c 9f f6 90 <0f> 0b 90 eb cc e8 f1 3c 9f f6 eb 05 e8 ea 3c 9f f6 5b 41 5c 41 5e RSP: 0018:ffffc900057a78f0 EFLAGS: 00010293 RAX: ffffffff8b287154 RBX: ffff88807ba72780 RCX: ffff8880213e8000 RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000 RBP: 00000000ffffffef R08: ffffffff9024cc67 R09: 0000000000000000 R10: fffff52000af4eb0 R11: fffffbfff204998d R12: dffffc0000000000 R13: ffffffff904a1080 R14: ffff888144ed0008 R15: ffff888144ed0e20 FS: 0000000000000000(0000) GS:ffff888124de6000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005642de0a8a70 CR3: 000000007a40c000 CR4: 00000000003526f0 Call Trace: <TASK> ops_exit_list net/core/net_namespace.c:200 [inline] ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:253 cleanup_net+0x572/0x810 net/core/net_namespace.c:706 process_one_work kernel/workqueue.c:3387 [inline] process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3470 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3551 kthread+0x38b/0x480 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||
| CVE-2026-98074 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: do not clear curr_active_slave prematurely when releasing all slaves When releasing all slaves during bond destruction (all == true), __bond_release_one() unconditionally clears bond->curr_active_slave to NULL in every iteration. If a backup slave is released before the active slave, bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(), which increments the active slave dev promiscuity counter and sets bond_info->primary_is_promisc = 1. Because bond->curr_active_slave was prematurely cleared to NULL when releasing the backup slave, the subsequent iteration releasing the active slave evaluates oldcurrent as NULL, so bond_change_active_slave(bond, NULL) is skipped. Consequently, bond_alb_handle_active_change() is never called to decrement the promiscuity counter, permanently leaking promiscuous mode on the physical device after bond teardown. When oldcurrent == slave, bond_change_active_slave(bond, NULL) already sets bond->curr_active_slave to NULL. We only need to avoid selecting a new active slave when all == true. Replace the if (all) branch with if (!all && oldcurrent == slave). | ||||
| CVE-2026-98104 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted gen_new_kid() falls back to returning max (htid | 0xFFF) when both idr_alloc_u32() ranges are full, instead of reporting an error. u32_change() trusts that value and inserts a new knode with a handle that is already live in the hash table, breaking handle uniqueness within the table's node ID space. The handle was never reserved in ht->handle_idr, so every later error path that does idr_remove(&ht->handle_idr, handle) removes the reservation of a different, live knode, which is then reused — one failed add compounds into further duplicates. The 4095 limit is per (table, bucket) — ht->handle_idr is per hash table and the range is derived from htid (bucketid), so a table with divisor 256 can legitimately hold 256*4095 knodes. The sibling helper gen_new_htid() has the same silent in-band failure: it returns 0 when the tp_c handle pool (1..0x7FF) is full, and u32_init() publishes the root hash table with handle 0 without checking. Two root tables with handle 0 alias in u32_lookup_ht(), allowing cross-tcf_proto knode add/lookup/delete. Add the same exhaustion check that the divisor path already has. Return an error so u32_change() fails with ENOSPC/ENOMEM when the node ID space is exhausted, and so u32_init() fails with -ENOMEM when the hash table ID space is exhausted. The extack message distinguishes pool exhaustion (-ENOSPC) from a transient allocation failure (-ENOMEM). Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded) - Create a clsact qdisc on a device, then add 4095 u32 filters with auto-generated handles to fill the node ID space for the root hash table (single bucket). The 4096th auto-handle filter add triggers the duplicate handle (fh 800::fff reused). Reachable at Level 2 (unshare -Urn, namespace-local CAP_NET_ADMIN). - For gen_new_htid: create 2047 u32 proto entries on the same block to fill the tp_c handle pool, then create one more. The root table gets handle 0 and aliases with other handle-0 root tables. | ||||
| CVE-2026-98105 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: oa_tc6: Improve the error recovery When oversubscribed traffic causes lot of buffer overflow errors, probably due to loss of data chunks, driver fails to find a data chunk with end_valid bit set, before it runs out of sk buffer space. As a result, assert is seen during skb_put. Now, check is made if skb buffer has enough tailroom for the incoming data before accepting. If there is no room, current frame is abandoned and it will start looking for a data chunk with start_valid bit, that is a new frame. SK buffer allocation error is considered as recoverable error. rx_buf_overflow flag is too specific and no longer the only condition this flag is used for. Therefore it is renamed as wait_until_start_valid. This is more appropriate as this flag is used to look for the next data chunk with SV bit set, after failures like buffer overflow, buffer allocation failure, skb pointer validity besides buffer overflow error. Not writing to status0 if it reads 0. | ||||
| CVE-2026-98106 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: Prevent double migration of device pages A device-private folio migrated to system memory by a CPU fault can remain reachable through the raw-PFN eviction path until migration finalization drops the source reference. If eviction selects the same device-private folio during this window, it can attempt to migrate the folio again. The second migration can leave an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to retry indefinitely and resulting in a soft lockup and RCU stall. Mark successfully migrated device-private folios using a low bit of their zone_device_data before migration finalization. Make both CPU-fault and raw-PFN migration paths skip device-private folios carrying this flag. Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve it when a device-private folio is split. Keeping the state on the physical folio also avoids depending on a virtual address that may change before a fault occurs. v2: - Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost) - Mark every base page covered by a migrated folio so retirement remains valid if the folio is later split. v3: - Store the migrated state in a low bit of zone_device_data instead of adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost) - Mask the flag when retrieving the ZDD and preserve it when splitting a folio. - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ v4: - Advance by the folio size only for migration entries marked with MIGRATE_PFN_COMPOUND. (Sashiko) v5: - Simplify ZDD flag updates and folio iteration. (Matthew Brost) - Skip retired device-private folios in the CPU-fault path. (Matthew Brost) - Preserve flag bits while taking a new ZDD reference for split folios. v6: - Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration entries are processed one at a time. (Sashiko) - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ The lockup was observed as: [10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557] [10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE [10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023 [10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe] [10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [10109.860655] Call Trace: [10109.860655] <TASK> [10109.860657] folio_lruvec_lock_irqsave+0x216/0x220 [10109.860661] ? __pfx_lru_add+0x10/0x10 [10109.860665] folio_batch_move_lru+0xc8/0x450 [10109.860670] ? lock_acquire+0xc4/0x2d0 [10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0 [10109.860677] ? folio_migrate_mapping+0xa6/0x110 [10109.860679] ? folio_migrate_flags+0x13b/0x1b0 [10109.860681] ? __pfx_lru_add+0x10/0x10 [10109.860683] __folio_batch_add_and_move+0xe7/0x2e0 [10109.860685] ? dma_iova_try_alloc+0xb0/0x140 [10109.860689] folio_add_lru+0x64/0x80 [10109.860691] __migrate_device_finalize+0x12c/0x270 [10109.860695] migrate_device_finalize+0x10/0x20 [10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper] [10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper] [10109.860709] xe_svm_bo_evict+0x15/0x20 [xe] [10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe] [10109.860921] xe_bo_move+0x107e/0x1570 [xe] [10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe] [10109.861059] ? __up_read+0x98/0x2b0 [10109.861061] ? lock_is_held_type+0xa3/0x130 [10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm] [10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm] [10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm] [10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm] [10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe] [10109.861198] ttm_bo_alloc_resource+0x219/0 ---truncated--- | ||||
| CVE-2026-98110 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: bound firmware ID by TLV length The firmware ID is treated as a NUL-terminated string even though the TLV length is its only boundary. If the value does not contain a NUL terminator, snprintf() can read beyond the received response. Limit the conversion to the advertised TLV value length. | ||||
| CVE-2026-98044 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject legacy packet loads from callbacks check_ld_abs() models a failed BPF_LD_ABS or BPF_LD_IND in a subprogram as an implicit return with R0 set to zero. It calls prepare_func_exit() to explore this synthesized path. When the load is reached directly from a synchronous callback, prepare_func_exit() enforces the callback return contract and marks R0 precise. R0 is not derived from a real instruction on this path, so precision backtracking reaches the callback call with R0 still requested and triggers the "callback unexpected regs" verifier bug. A privileged program loader can therefore cause a verifier warning and an -EFAULT BPF_PROG_LOAD. These legacy packet-load instructions are deprecated. Reject them from callbacks rather than complicating their implicit-return model. Check all active frames before constructing the implicit return so nested static subprograms cannot hide the callback context. Global functions are verified independently with a fresh frame zero, so an active-frame check cannot identify a global function called from a callback. Also check the complete subprogram call graph during stack-depth validation and reject a function containing a legacy load when any caller is a callback. This covers global and static descendants without making has_ld_abs transitive, preserving its per-function BTF return-type check. Ordinary uses outside callbacks remain supported. | ||||
| CVE-2026-98046 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf_btf_find_by_name_kind() as sleepable When bpf_btf_find_by_name_kind() finds a type in module BTF, it returns a new BTF object fd through __btf_new_fd(). This reaches anon_inode_getfd(), which can sleep while allocating or expanding the current task fd table. The helper prototype does not set might_sleep, so the verifier allows the helper in non-sleepable contexts such as BPF timer callbacks. The fd allocation can then sleep in softirq context and install the fd into the interrupted task. Mark the helper as sleepable. This preserves calls from the main body of a sleepable syscall program while rejecting calls from its non-sleepable regions. | ||||
| CVE-2026-98137 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: treat any nonzero dio zero-range return as an error ntfs_dio_zero_range() returns either 0 or a negative errno from blkdev_issue_zeroout(); it never returns a positive value. The zeroing failure check in ntfs_attr_fallocate() therefore never fired, so a failed zeroing operation was silently ignored: the loop kept going, the newly allocated clusters were folded into initialized_size and the write could succeed leaving stale on-disk data. Treat any nonzero return as an error and abort the allocation. | ||||
| CVE-2026-98138 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: do not mark the volume clean in sync_fs when errors were recorded ntfs_put_super() and the remount-read-only path both clear the dirty bit only when NVolErrors(vol) is false. ntfs_sync_fs() clears it unconditionally, so any sync() on a volume that recorded an error marks that volume clean. A volume without this set is then seen as not needing recovery and it does not run one, so whatever went wrong is never repaired. This change skips resetting the dirty bit when there are volume errors. Reproduced on a volume whose $MFTMirr does not match $MFT, which sets the error flag while leaving the mount read-write: after a write and a sync, the on-disk volume flags read 0x0000 with this driver and 0x0001 with the guard in place. | ||||