Export limit exceeded: 400059 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (400059 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-58379 | 2 Gimp, Redhat | 3 Gimp, Enterprise Linux, Rhel Eus | 2026-09-30 | 7.3 High |
| A flaw was found in GIMP's Paint Shop Pro (PSP) file format parser. This heap buffer overflow vulnerability allows a remote attacker to cause arbitrary code execution or a denial of service (DoS) by tricking a user into opening a specially crafted PSP image file. The vulnerability occurs because the software incorrectly calculates buffer sizes when processing low bit-depth images, leading to an overwrite of adjacent memory. | ||||
| CVE-2026-98001 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. ltc428_clk_provider_setup() does not fill in any parent clocks, and assumes that init.num_parents is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||
| CVE-2026-80110 | 1 Redhat | 3 Certificate System, Dogtag Certificate System, Enterprise Linux | 2026-09-30 | 8.1 High |
| A flaw was found in pki-core. The v2 REST ACL filter selects a tie-breaking permission for colliding literal and wildcard ACL keys using lexicographic string comparison rather than specificity, causing a wildcard-mapped permission to override a more specific literal-mapped permission when both match. In the CA's profile-management REST API this allows a request to POST /v2/profiles/raw -- intended to require Administrator-level profiles.create permission -- to instead be authorized under the lower-privileged profiles.approve permission held by the default Certificate Manager Agents group. The highest threat from this vulnerability is to confidentiality and integrity of the certificate authority's issuance policy. | ||||
| CVE-2026-66651 | 2 Multivendorx, Wordpress | 2 Multivendorx, Wordpress | 2026-09-30 | 6.5 Medium |
| Missing Authorization vulnerability in MultiVendorX MultiVendorX dc-woocommerce-multi-vendor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects MultiVendorX: from n/a through 5.0.19. | ||||
| CVE-2026-102984 | 2026-09-30 | N/A | ||
| Astro is a web framework for content-driven websites. Prior to 11.1.3, the @astrojs/node adapter builds a request URL from the Host header, and a malformed port can make that URL invalid. The recovery path reuses the same malformed host and throws an uncaught TypeError: Invalid URL before routing begins. In the default standalone configuration, the request returns an HTTP 500 response and the server continues running, but when staticHeaders is enabled the synchronous handler does not catch the exception and the Node process terminates. Proxies and CDNs that reject malformed Host headers prevent this path from reaching the origin. The issue affects availability only and does not expose data or permit code execution. This issue is fixed in version 11.1.3. | ||||
| CVE-2026-102983 | 2026-09-30 | N/A | ||
| Astro is a web framework for content-driven websites. From 5.2.0 until 8.2.4, the @astrojs/netlify adapter generates regular expressions for Netlify Image CDN remote-image allowlists without anchoring them to the beginning of the URL. Because Netlify evaluates these expressions with RegExp.test(), an allowed origin appearing only in a source URL's path or query can satisfy image.domains or image.remotePatterns while the URL's actual host remains attacker-controlled. An unauthenticated request to the public /.netlify/images endpoint can therefore cause the Image CDN to request attacker-selected URLs and may probe or reach internal services. Netlify egress protections may constrain reachable targets, and image transformation limits direct response exfiltration; no confidentiality or integrity impact has been demonstrated. This issue is fixed in version 8.2.4. | ||||
| CVE-2026-102717 | 2026-09-30 | N/A | ||
| MQTT WebSocket setter ABI mismatch may disclose memory or cause a crash | ||||
| CVE-2026-98010 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: drr: clamp quantum in change class drr_change_class() rejects explicit quantum==0 but falls back to psched_mtu() with no floor. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 (or a zero psched_mtu on a headerless device) makes the deficit-refill loop spin under the qdisc lock. Add clamp_t(u32, quantum, 256, 1<<20) after the zero reject and on the fallback path. The explicit-zero reject is preserved. Conditions to recreate the bug: CONFIG_NET_SCH_DRR=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root drr tc class add dev dummy0 parent 1: classid 1:1 drr quantum 1 | ||||
| CVE-2026-98011 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: clamp quantum in change and init paths hhf_change() accepts any quantum from userspace, including 1. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes the deficit-refill loop spin ~2^31 times under the qdisc lock (a soft lockup / denial of service). Add max(256U, ...) in hhf_change() matching fq_codel_change(). Clamp hhf_init() to [256, 1<<20] matching the siblings, and remove the old fallback that only set quantum=256 on overflow. Conditions to recreate the bug: CONFIG_NET_SCH_HHF=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root hhf tc qdisc change dev dummy0 root hhf quantum 1 stab data 32768 size_log 15 cell_log 0 | ||||
| CVE-2026-98014 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, prevent mc_list repopulation during vport disable In mlx5_esw_vport_disable(), move esw_apply_vport_rx_mode() ahead of esw_vport_change_handle_locked() so vport->allmulti_rule is NULL before the change handler observes it. During FW-fatal recovery the disable runs while dev->state == INTERNAL_ERROR. The promisc query inside esw_update_vport_rx_mode() fails and returns early, leaving vport->allmulti_rule intact, so esw_update_vport_mc_promisc() runs and adds MLX5_ACTION_ADD entries to vport->mc_list whose flow rules are then installed in the FDB by esw_add_mc_addr(). esw_destroy_legacy_table() tears down the FDB with those refs still held, corrupting the sub-tree and leaving dangling flow_rule pointers in vport->mc_list. Two-stage failure on `echo 1 > /sys/bus/pci/devices/<bdf>/reset`: refcount_t: underflow; use-after-free. tree_put_node+0xef/0x110 [mlx5_core] clean_tree+0x44/0xd0 [mlx5_core] (x5) mlx5_fs_core_cleanup+0x57/0x1c0 [mlx5_core] mlx5_unload+0x65/0xd0 [mlx5_core] ... mlx5_health_try_recover BUG: unable to handle page fault for address: 0000000003000055 down_write+0x1c/0x60 mlx5_del_flow_rules+0x33/0x1f0 [mlx5_core] esw_del_mc_addr+0x7b/0x170 [mlx5_core] esw_apply_vport_addr_list+0x56/0xf0 [mlx5_core] esw_vport_change_handle_locked+0x28b/0x310 [mlx5_core] mlx5_esw_vport_enable+0x270/0x4a0 [mlx5_core] ... mlx5_load ... mlx5_health_try_recover esw_apply_vport_rx_mode(false, false) clears vport->allmulti_rule via its local state machine even when the FW del fails. With the rule NULL the !IS_ERR_OR_NULL(allmulti_rule) gate in the change handler closes, no rules are installed during disable, and the reload starts with a clean mc_list. | ||||
| CVE-2026-98015 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads tt->ref_count after termtbl_mutex has been released. Two concurrent callers on the same mlx5_termtbl_handle race: one decrements ref_count to zero, removes the hash entry, and calls kfree(tt) while the other has already dropped the mutex and is about to evaluate if (!tt->ref_count), producing a use-after-free. Fix this by capturing the result of the decrement into a stack-local last variable before dropping the mutex. The cleanup decision is now made entirely under termtbl_mutex, and tt is not touched after kfree. | ||||
| CVE-2026-98017 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: defer qdisc freeing after failed creation An RTM_NEWQDISC request can make clsact bind a populated shared ingress block during ->init(), publishing an embedded mini_Qdisc to lockless readers. If the same request has an invalid TCA_RATE, estimator setup fails after ->init(); the unwind removes the pointer but synchronously frees its containing qdisc while tc_run() may still hold it. Retire failed qdiscs through the same RCU helper as normal destruction. Inline the synchronous free into the callback now that no direct callers remain. | ||||
| CVE-2026-87830 | 1 Apache | 1 Wss4j | 2026-09-30 | N/A |
| In the StAX streaming WS-SecurityPolicy validator, certain relative or unsupported XPath expressions can be converted into paths that never match the actual XML element path. A remote SOAP peer may therefore send a required element without the expected signature or encryption. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue. | ||||
| CVE-2026-88920 | 1 Apache | 1 Wss4j | 2026-09-30 | N/A |
| An authentication bypass in the DOM security processor in Apache WSS4J allows unauthenticated remote attackers to forge authenticated SOAP messages via a crafted unsigned SAML sender-vouches assertion containing an attacker-controlled key. Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue. | ||||
| CVE-2025-13807 | 1 Orionsec | 2 Orion-ops, Orion Ops | 2026-09-30 | 4.3 Medium |
| A vulnerability was detected in orionsec orion-ops up to 5925824997a3109651bbde07460958a7be249ed1. Affected is the function MachineKeyController of the file orion-ops-api/orion-ops-web/src/main/java/cn/orionsec/ops/controller/MachineKeyController.java of the component API. The manipulation results in improper authorization. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-103227 | 1 Gpac | 1 Gpac | 2026-09-30 | 6.3 Medium |
| A weakness has been identified in GPAC up to 26.07.0. Affected by this issue is the function gf_dash_resolve_url of the file src/media_tools/dash_client.c of the component DASH Client. This manipulation causes buffer overflow. The attack is possible to be carried out remotely. Upgrading to version abi-16.26 can resolve this issue. Patch name: 4c8e26f278ff63eec57968f7bc696f604bb0cffd. It is recommended to upgrade the affected component. | ||||
| CVE-2025-13808 | 1 Orionsec | 2 Orion-ops, Orion Ops | 2026-09-30 | 7.3 High |
| A flaw has been found in orionsec orion-ops up to 5925824997a3109651bbde07460958a7be249ed1. Affected by this vulnerability is the function update of the file orion-ops-api/orion-ops-web/src/main/java/cn/orionsec/ops/controller/UserController.java of the component User Profile Handler. This manipulation of the argument ID causes improper authorization. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-13809 | 1 Orionsec | 2 Orion-ops, Orion Ops | 2026-09-30 | 6.3 Medium |
| A vulnerability has been found in orionsec orion-ops up to 5925824997a3109651bbde07460958a7be249ed1. Affected by this issue is some unknown functionality of the file orion-ops-api/orion-ops-web/src/main/java/cn/orionsec/ops/controller/MachineInfoController.java of the component SSH Connection Handler. Such manipulation of the argument host/sshPort/username/password/authType leads to server-side request forgery. The attack may be performed from remote. The exploit has been disclosed to the public and may be used. A patch should be applied to remediate this issue. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-103389 | 1 Misp | 1 Misp | 2026-09-30 | N/A |
| MISP contains a stored cross-site scripting (XSS) vulnerability in the galaxy icon handling path. The icon field of a galaxy object was persisted without any server-side validation through the galaxy add, edit, and sync/import capture endpoints. The stored value was subsequently concatenated directly into HTML markup by the D3-based correlation graph rendering scripts (both the default and Overmind themes) using the .html() method. A user holding the perm_galaxy_editor permission, which is granted to the stock User role, could store arbitrary HTML or JavaScript in the icon field. Any other user who opened the correlation graph of an event containing a cluster belonging to that galaxy would have the injected script executed in their browser session. Impact: - Arbitrary script execution in the context of the victim's MISP session - Potential theft of session credentials, manipulation of displayed data, or initiation of actions on behalf of the victim - Affects both the default and Overmind UI themes Affected versions: <2.5.48 | ||||
| CVE-2026-103388 | 1 Misp | 1 Misp | 2026-09-30 | N/A |
| MISP renders the source field of a Galaxy Cluster as a clickable hyperlink whenever the stored value passes PHP's FILTER_VALIDATE_URL validation. Because FILTER_VALIDATE_URL accepts the javascript: URI scheme, a user with galaxy editor privileges on the local instance or on a synced instance could store a javascript: URL as the cluster source. When another user views the affected Galaxy Cluster and clicks the rendered link, the embedded script executes in the victim's browser context, enabling session hijacking, data exfiltration, or actions performed on behalf of the victim. Preconditions: - Attacker must hold galaxy editor privileges (local or via sync). - Victim must view the affected cluster and click the malicious link. Impact: - Stored cross-site scripting (XSS) in the victim's browser. - Potential session theft, credential harvesting, or unauthorized actions within the MISP application. Affected: <2.5.48. | ||||