Export limit exceeded: 15646 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15646 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-95331 | 1 Google | 1 Chrome | 2026-09-29 | 9.6 Critical |
| Out of bounds write in ANGLE in Google Chrome prior to 154.0.8037.57 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-101203 | 1 Faststone | 1 Image Viewer | 2026-09-29 | 6.3 Medium |
| A vulnerability has been found in FastStone Image Viewer up to 8.3. The impacted element is an unknown function of the component 1bpp RLE Decoder. The manipulation leads to out-of-bounds write. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-98025 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap overflow The 0xffff length sentinel detects a router reboot and schedules re-enabling of ethernet mode, but then falls through to the rest of the loop body. The next check is } else if (len > CX82310_MTU) { which is the else of the just-matched if -- it never fires for len == 0xffff. The MTU bound that normally caps the incomplete-packet save path is silently bypassed. With 0xffff > skb->len always true (rx_urb_size is 4096), the incomplete-packet branch saves dev->partial_len = skb->len bytes into dev->partial_data. partial_data is kmalloc(hard_mtu) = kmalloc(CX82310_MTU + 2) = 1516 bytes, but skb->len after the 2-byte header pull can be up to 4094. A device that sends a 4096-byte URB starting with [0xff 0xff] therefore copies 4094 device-provided bytes into a buffer allocated for 1516 bytes, exceeding its requested size by 2578 bytes. The next URB then reads dev->partial_len (4094) back from the same 1516-byte buffer and dev->partial_rem (65535 - 4094 = 61441) from the new URB's ~4KB skb, both well past their allocations, and delivers the spliced result as a 64KB "frame" to the network stack. Bail out of rx_fixup after scheduling the re-enable work; the remainder of a reboot-marker URB is not meaningful packet data. This restores the invariant that partial_len < CX82310_MTU + 2 on the save path, since every other route there has already passed the MTU check. | ||||
| CVE-2026-98030 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size bcm_sf2_cfp_rule_get_all() walks the whole cfp.unique bitmap into rule_locs[] without consulting nfc->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed CFP rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it. | ||||
| CVE-2026-97548 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix the rtrmap and rtrefcount _maxlevels_ondisk functions The _maxlevels_ondisk functions are used to compute the size of in-memory btree cursors for each btree type. Unfortunately, LOLLM noticed that the rtrmap and rtrefcount versions of these functions forget to account for the inode root, which means that we could access beyond the end of the cursor given a sufficiently large btree. Fix this. | ||||
| CVE-2026-102301 | 2026-09-29 | N/A | ||
| Out of bounds write in GPU in Google Chrome prior to 154.0.8037.92 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-95304 | 1 Google | 1 Chrome | 2026-09-29 | 8.8 High |
| Out of bounds write in V8 in Google Chrome prior to 154.0.8037.57 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-93393 | 1 Mongodb | 1 C Driver | 2026-09-29 | 8.1 High |
| A heap-based buffer overflow exists in the TLS transport layer of the MongoDB C Driver when built with the Windows platform TLS backend. A remote endpoint that the client connects to can cause the driver to write uncontrolled data outside the bounds of a heap allocation while processing incoming encrypted traffic after the TLS handshake completes. No authentication or user interaction is required, because the affected processing occurs before any application-level authentication completes. Triggering this issue may lead to memory corruption in the client process, disclosure of adjacent heap memory, or termination of the process. | ||||
| CVE-2026-95329 | 2026-09-29 | 9.6 Critical | ||
| Out of bounds write in WebGL in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) | ||||
| CVE-2026-95322 | 2026-09-29 | 8.3 High | ||
| Out of bounds write in GPU in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) | ||||
| CVE-2026-102730 | 2026-09-29 | N/A | ||
| Mounting an attacker-controlled NAND flash image (`lx_nand_flash_open()`) triggers an unbounded out-of-bounds heap **write** in LevelX's NAND flash-translation-layer metadata parser that overwrites a driver function pointer in the control block, giving a demonstrated control-flow hijack — RIP set to a full 8-byte attacker-chosen value (register-verified). Two accompanying OOB reads. All reproduced verbatim under ASan at HEAD `9f1cfdc`. (The affected metadata-parser header states "Some portions generated by Copilot (Sonnet 4.6)" — an AI-generated parser with an unchecked on-flash count.) | ||||
| CVE-2026-102729 | 2026-09-29 | N/A | ||
| `gx_binres_theme_load()` sizes its theme buffer for the theme it was asked for, and allocates it even when the resource holds no theme with that id. A theme id at or past the theme count declared by the resource gets a buffer of zero bytes. The load pass then walks past the end of the theme table, takes whatever follows as a theme header, and writes a `GX_THEME` and its tables into that zero-byte buffer. | ||||
| CVE-2026-102715 | 2026-09-29 | N/A | ||
| Any host on the LAN can send two mDNS records and make the responder write past the end of its transmit packet. The string table stores each name in a slot rounded up to a multiple of four: ```c /* addons/mdns/nxd_mdns.c:11436, 11443, 11447 */ memory_len = ((memory_len & 0xFFFFFFFC) + 8) & 0xFFFFFFFF; ... len = *((USHORT*)(p - 2)); /* slot size, not string length */ if ((len == memory_len) && ... _nx_mdns_name_match(start, memory_ptr, memory_size) ...) ``` The lookup that decides whether an incoming name is already stored compares the rounded slot size, so names of 12, 13, 14 and 15 characters share one bucket. A second name in the bucket is answered with the pointer to the first, and the record then carries a string up to three bytes longer than the length the caller accounted for. `_nx_mdns_packet_rr_add` (nxd_mdns.c:8911) sizes its only bound check from that stale length, and `_nx_mdns_name_string_encode` writes the real string. Two PTR records are enough, both ordinary mDNS responses to a `_http._tcp` query, with owner names whose lengths fall in the same bucket: ``` ==87491==ERROR: AddressSanitizer: heap-buffer-overflow WRITE of size 1 at 0x611000000124 thread T5 #0 _nx_mdns_name_string_encode addons/mdns/nxd_mdns.c:13096 #1 _nx_mdns_packet_rr_add addons/mdns/nxd_mdns.c:8911 0x611000000124 is 0 bytes to the right of 228-byte region ``` The overflow is one to three bytes of attacker-influenced name data past `nx_packet_data_end`. In a normal pool that lands in the next packet in the same pool rather than in a redzone, so the visible effect is a corrupted neighbouring packet or a corrupted pool free list rather than a clean crash. Compare the slot size against the stored string length before declaring a match, or keep the string length in the slot header and return it to the caller so the encoder and the bound check agree. | ||||
| CVE-2026-59181 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-09-29 | 6.1 Medium |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.20.0, 3.1.15.0, and 3.2.0.3-beta1, A crafted cineon file can supply a numberofelements value greater than the format maximum of eight. cineoninput::open() uses that unchecked value as the loop bound while filling the fixed strings[8] array, writing pointers beyond the stack buffer and into adjacent state, resulting in memory corruption and denial of service. The affected implementation is identified by src/cineon.imageio/cineoninput.cpp, CineonInput::open(), numberOfElements, and strings[8], which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.20.0, 3.1.15.0, and 3.2.0.3-beta1. | ||||
| CVE-2026-63419 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-09-29 | 7.8 High |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1, A zbuffer-only tiled iff is exposed with a 16-bit public imagespec while the decoder retains a 32-bit internal pixel size. iffinput::read_native_tile() copies according to m_header.pixel_bytes() rather than imagespec::tile_bytes(true), and a failed read can leave m_buf nonempty so a later call copies partially initialized data into the undersized caller buffer, resulting in a heap out-of-bounds write and memory corruption. The affected implementation is identified by src/iff.imageio/iffinput.cpp, IffInput::read_native_tile(), ImageSpec::tile_bytes(true), m_header.pixel_bytes(), ZBUFFER, and m_buf, which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1. | ||||
| CVE-2026-63422 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-09-29 | 7.8 High |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1, A valid tiled openexr image whose width is not a multiple of its tile width can trigger an overflow when a caller reads a partial edge-tile rectangle. openexrinput::read_native_tiles() copies each row into the caller buffer using the padded whole-tile scanline_stride rather than user_scanline_bytes for the requested rectangle, resulting in a heap out-of-bounds write and memory corruption. The affected implementation is identified by src/openexr.imageio/exrinput.cpp, OpenEXRInput::read_native_tiles(), partial edge tile, user_scanline_bytes, and scanline_stride, which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1. | ||||
| CVE-2026-63638 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-09-29 | 8.3 High |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1, A crafted cineon image can declare unsupported component bit depth 26. cineoninput::open() maps it to a 32-bit imagespec, but libcineon maps the unsupported depth to an 8-byte value, so cineoninput::read_native_scanline() causes attacker-controlled data to be written beyond the 4-byte-per-pixel caller buffer, resulting in a heap out-of-bounds write and memory corruption. The affected implementation is identified by src/cineon.imageio/cineoninput.cpp, CineonInput::open(), CineonInput::read_native_scanline(), ComponentDataSize(), bit depth 26, and ImageSpec, which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1. | ||||
| CVE-2026-67549 | 2 Academysoftwarefoundation, Openimageio | 2 Openimageio, Openimageio | 2026-09-29 | 7.6 High |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.1.16.0, A crafted 1-bit contiguous cmyk tiff is exposed through a native uint1 imagespec, so callers allocate a bit-packed buffer. tiffinput::read_native_scanline_locked() nevertheless invokes tiffinput::bit_convert() with 8-bit output and writes one expanded byte per value into that smaller buffer, resulting in a heap out-of-bounds write and memory corruption. The affected implementation is identified by src/tiff.imageio/tiffinput.cpp, TIFFInput::bit_convert(), TIFFInput::read_native_scanline_locked(), PHOTOMETRIC_SEPARATED, 1-bit CMYK, and native uint1 ImageSpec, which define the relevant source path, functions, state, and trigger. This issue is fixed in 3.1.16.0. | ||||
| CVE-2026-95357 | 2026-09-29 | 9.6 Critical | ||
| Out of bounds write in GPU in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) | ||||
| CVE-2026-72897 | 1 Openssl | 1 Openssl | 2026-09-29 | 7.5 High |
| Issue summary: A TLS server that calls SSL_set_SSL_CTX() to switch a connection to a different SSL_CTX part way through a handshake may access memory beyond the end of an internal array if the replacement context knows about more provider signature algorithms than the context the connection was created from. Applications which never call SSL_set_SSL_CTX() are not affected. Impact summary: A remote peer may be able to cause a small out-of-bounds read, and in some circumstances a fixed-value out-of-bounds write, on the server heap. This may lead to a Denial of Service. CWE: CWE-787: Out-of-bounds Write Description: A TLS connection records how many certificate slots it has when it is created, taken from the SSL_CTX that created it: the built-in certificate types plus one slot for each provider TLS-SIGALG entry that context was aware of. That count sizes an internal array of per-slot certificate validity flags. An application may replace a connection's SSL_CTX part way through the handshake by calling SSL_set_SSL_CTX(), most commonly from a servername callback in order to serve a different virtual host. Doing so did not refresh the recorded count. A provider signature algorithm's slot index is its position in the list of whichever context resolves it, so if the replacement context is aware of more of them than the original, an algorithm offered by the peer can resolve to an index beyond the end of the array. Processing the peer's signature algorithms then reads one four byte word past the end for each such algorithm and, where the word read is zero, writes a fixed value over it. A peer offering many of them can corrupt heap metadata and abort the process. Only provider signature algorithms which occupy one of the excess slots, and which the server also has configured, have this effect. Codepoints the replacement context does not recognise are discarded without being resolved to a slot, and provider signature algorithms are usable only from TLS 1.3. The two contexts must therefore be aware of different numbers of provider signature algorithms, which requires separate library contexts, a provider loaded between the two being created, or providers which differ in what they advertise - in 4.0, for example, the default provider advertises SM2 where the FIPS provider does not. A deployment meeting the condition is also unable to negotiate the affected algorithms with legitimate clients, since the same stale count hides the corresponding certificates, so the misconfiguration is likely to be noticed. For that reason, and because the configuration is not the default, this issue has been assessed as Low severity. FIPS impact: no No FIPS modules are affected by this issue as the affected code is outside the OpenSSL FIPS module boundary. | ||||